Studying the Influence of Orientation and Layer Thickness on the Physico-Mechanical Properties of Co-Cr-Mo Alloy Manufactured by the SLM Method

Studying the Influence of Orientation and Layer Thickness on the Physico-Mechanical Properties of Co-Cr-Mo Alloy Manufactured by the SLM Method

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	S. Adjamskiy, G. Kononenko, R. Podolskyi, S. Baduk
Format:	Artikel
Sprache:	English
Veröffentlicht:	2022
Schriftenreihe:	Science and Innovation
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001363859
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

ДОСЛІДЖЕННЯ ВПЛИВУ ОРІЄНТУВАННЯ ТА ТОВЩИНИ ШАРУ ДРУКУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ СПЛАВУ Co-Cr-Mo, ВИГОТОВЛЕНОГО МЕТОДОМ СЛП
von: Adjamskiy, S., et al.
Veröffentlicht: (2022)

Application of SLM-technology for manufacture of dental implants from Ti – 6Al – 4V alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Influence of technological parameters of SLM-process on porosity of metal products
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2020)

The influence of time interval between application of layers by SLM-technology on the structure and properties of INCONEL 718 alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Improving the efficiency of the SLM-process by adjusting the focal spot diameter of the laser beam
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Microstructure of Co-Cr dental alloys manufactured by casting and 3D selective laser melting
von: M. O. Vasylyev, et al.
Veröffentlicht: (2022)

Электропроводность плёночного композита NiCoCr—MoS₂
von: Федотов, А.К., et al.
Veröffentlicht: (2011)

The impact of material and thickness of the separation layer on the structure condensates Cu-Mo
von: V. H. Hrechaniuk, et al.
Veröffentlicht: (2016)

Producing of thick vacuum condensates of high-entropic alloys CrFeCoNiCu and AlCrFeCoNiCu by the method of electron beam deposition
von: A. I. Ustinov, et al.
Veröffentlicht: (2019)

Electrical conductivity of NiCoCr–MoS2 film composite
von: A. K. Fedotov, et al.
Veröffentlicht: (2011)

Superconducting and normal properties of the set of Mo/Si superlattices with variable Si layer thickness
von: Mikhailov, M.Yu., et al.
Veröffentlicht: (1999)

High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys obtained by mechanical alloying and subsequent sintering
von: V. V. Cherniavskyi, et al.
Veröffentlicht: (2018)

Possibilities of forecasting physico-mechanical properties of solid alloys WC-CO by distribution of double grade dimensions
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Study of the Material Quality of Samples Obtained by Selective Laser Melting (SLM) Method from IN718 Alloy Powder
von: V. V. Klochykhin, et al.
Veröffentlicht: (2021)

Composite powders based on FeMoNiCrB amorphizing alloy with
von: Yu. S. Borysov, et al.
Veröffentlicht: (2021)

Structure and properties of wear-resistant materials based on Co-Mo-Cr-Si-B system
von: A. M. Kostin, et al.
Veröffentlicht: (2019)

Experience in manufacture of thick-walled structures for unique constructions
von: E. Engindeniz, et al.
Veröffentlicht: (2011)

Mechanochemical modification of the structure and physico-mechanical proptrties of polyethylene, carbide-containing Si, Ti and Mo
von: V. P. Gordienko, et al.
Veröffentlicht: (2016)

Technology of obtaining alloy powder CoCrAlYSi
von: O. P. Vasyleha, et al.
Veröffentlicht: (2011)

High-entropy superhard coatings based on AlTiCrVNbMo alloy
von: V. F. Horban, et al.
Veröffentlicht: (2020)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Increase of manufasturability of perspective multicomponent alloys of system Nb−Ti−Al, alloyed Cr, Zr, Mo, Si
von: T. L. Kuznetsova, et al.
Veröffentlicht: (2018)

Structure and mechanical properties of Al-Fe-Cr alloys for elevated temperatures, reinforced by nanoquasicrystalline particles additionally alloyed by Ti, Mo and Nb
von: Ju. V. Milman, et al.
Veröffentlicht: (2014)

Comparative Charcteristics of Physico-Chemical Properties of Jet Fuels Produced in Different Manufacturing Countries
von: S. V. Bojchenko, et al.
Veröffentlicht: (2013)

Modern methods of manufacturing three-layer panels from aluminium alloys (Review)
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2018)

Possibilities of manufacturing three-layer welded honeycomb panels from aluminium alloys
von: L. V. Petrushinets, et al.
Veröffentlicht: (2018)

Determination of the required ratio of the components of charge materials for the smelting of alloy steel 35CrMo
von: K. O. Kostyk, et al.
Veröffentlicht: (2022)

Charge Transport in MoRe—Si(W)—MoRe Heterostructures under Various Levels of Semiconductor Layer Alloying
von: A. P. Shapovalov
Veröffentlicht: (2013)

Orientational order parameter in CO₂-based alloys with rare gases from THEED data: pure CO₂
von: Danchuk, V.V., et al.
Veröffentlicht: (2007)

COMPARISON OF THE PROPERTIES OF CoW AND CoMo ALLOYS DEPOSITED BOTH FROM ALKALINE CITRATE AND CITRATE-PYROPHOSPHATE ELECTROLYTES
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2023)

Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
von: Sheng, L.Y.
Veröffentlicht: (2016)

The influence of VC and TaS alloying microadditives on the structure and physico-mechanical properties of VK10 hard alloys
von: V. P. Botvynko
Veröffentlicht: (2018)

The mechanism of current transport in the structure Al-p-CdTe-Mo with different thickness of the base
von: Mirsagatov, Sh.A., et al.
Veröffentlicht: (2015)

Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)

Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
von: Kolodiy, I.V., et al.
Veröffentlicht: (2021)

Influence of heat treatment of specimens from Ti6Al4V manufactured by the technology of selective laser melting on structure and mechanical properties
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2022)

Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
von: Kovalenko, V.I., et al.
Veröffentlicht: (2019)

Effect of Al, Cr, Mo, Zr, Si, and C on the temperature ranges of hardening of multicomponent niobium-based alloys
von: M. P. Brodnikovskyi, et al.
Veröffentlicht: (2020)

Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
von: Sukhova, O.V.
Veröffentlicht: (2020)

Structural and Microstructural Analysis of Zn–Mo Alloy Layers Electrodeposited from Aqueous Citrate Solution
von: Świątek, Z., et al.
Veröffentlicht: (2017)