Cover Image

Fatigue parameter based on the assessment of the stress components on all material planes

Saved in:

Bibliographic Details
Date:	2019
Main Authors:	S. Lu, J. Melendez, J. M. Martínez-Esnaola
Format:	Article
Language:	English
Published:	2019
Series:	Materials Science (Physicochemical mechanics of materials)
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001009019
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Finite Element Analysis of Hyperelastoplastic Mixed-hardening Materials under Plane Stresses
by: J. P. Pascon
Published: (2024)

Two components of shear stress field in glide plane in multicomponent alloys
by: M. I. Luhovyi, et al.
Published: (2022)

Residual stress management in welding: measurement, fatigue analysis and improvement treatments
by: Yu. Kudryavtsev, et al.
Published: (2013)

Residual stress management in welding: measurement, fatigue analysis and improvement treatments
by: Kudryavtsev, Yu., et al.
Published: (2013)

The equivalent amplitude stress as a solution of mean stress effect problem in fatigue analysis
by: Bednarek, T., et al.
Published: (2005)

Assessing fatigue strength of a plate traction chain
by: J. Wang, et al.
Published: (2020)

Measurement of ultrasound phase velocity as a method to determine stresses and fatigue of structural materials
by: S. M. Maievskyi
Published: (2009)

Fatigue Limits of Steels and Stress Gradient
by: Troshchenko, V.T., et al.
Published: (2011)

Study on Fatigue Life of Plow Bit under Different Planning Parameters
by: Q. Zhang, et al.
Published: (2014)

Study on Fatigue Life of Plow Bit under Different Planning Parameters
by: Zhang, Q., et al.
Published: (2014)

A new stress-based multiaxial high-cycle fatigue damage criterion
by: Xin Li, et al.
Published: (2018)

Precision measurement of ultrasonic vibration velocity as a method of evaluation of stresses and fatigue of structural materials
by: S. M. Maievskyi
Published: (2015)

Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
by: Shukaev, S., et al.
Published: (2008)

Fatigue of NPP Components and Piping under Service Conditions
by: Filatov, V.M.
Published: (2004)

Performance Comparison of Composite and Steel Shafts Based on Stress–Strain Response and Fatigue Life
by: Abner, Chikwado Enyinnaya, et al.
Published: (2026)

Performance Comparison of Composite and Steel Shafts Based on Stress–Strain Response and Fatigue Life
by: Abner, Chikwado Enyinnaya, et al.
Published: (2026)

Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
by: Zhao, L.H., et al.
Published: (2018)

Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
by: Zapletal, J., et al.
Published: (2008)

New localities of Festuca altissima All. (Poaceae) in plane part of Ukraine
by: O. I. Priadko, et al.
Published: (2004)

The fatigue crack length probability distribution in rivet joints of a plane
by: S. R. Ignatovich, et al.
Published: (2013)

Fatigue life of welded joints according to energy criteria in the critical plane
by: Lagoda, T.
Published: (2006)

Plane Problem on Stress Distribution at Neighborhood of the Crack under Tension of Linearly Strengthening Material
by: L. P. Khoroshun, et al.
Published: (2014)

Assessment of fatigue damage of the sea ship propeller shaft
by: O. I. Balytskyi, et al.
Published: (2013)

The Equivalent Amplitude Stress as a Solution of Mean Stress Effect Problem in Fatigue Analysis
by: T. Bednarek, et al.
Published: (2005)

Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
by: Razavi, S.M.J., et al.
Published: (2017)

Oscillations of all solutions of iterative equations
by: Nowakowska, W., et al.
Published: (2007)

Effect of stress concentration on the fatigue and corrosion-fatigue properties of cast aluminum VAL10 and forced aluminum AK6 alloys
by: Karlashov, A.V., et al.
Published: (1985)

Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
by: A. Falkowska, et al.
Published: (2015)

Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
by: Falkowska, A., et al.
Published: (2015)

Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
by: Haq, A.U., et al.
Published: (2018)

Assessment of diving risks — based on selected haemostatic parameters
by: Olszanski, R., et al.
Published: (2005)

Native minerals as a components of composite polyaniline-based materials
by: V. Makohon, et al.
Published: (2017)

Improved Method of Fatigue Life Assessment for TiAl Alloys
by: R. C. Feng, et al.
Published: (2014)

Improved Method of Fatigue Life Assessment for TiAl Alloys
by: Feng, R.C., et al.
Published: (2014)

Nobility of Bessarabia materials for the First all-russian census (1897)
by: M. Bashly
Published: (2013)

Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
by: Luo, W.B., et al.
Published: (2018)

Assessing Validity of the Target Parameters of the &quot;Energy Strategy of Ukraine till 2035” Based on Materiality Guideline
by: A. E. Perfilova
Published: (2015)

Fatigue analysis of structures during random loadings
by: Zarka, J., et al.
Published: (2009)

All-Ukrainian Council of Religious Associations as a Component of Civil Society in Ukraine
by: O. Sahan
Published: (2017)

Environmentally-assisted fatigue crack growth in prestressing steel wires
by: Toribio, J., et al.
Published: (2011)