Contact endurance of steels after ion nitriding in hydrogen-free media
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | P. V. Kaplun, V. A. Honchar, T. V. Donchenko |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2019
|
| Назва видання: | Materials Science (Physicochemical mechanics of materials) |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001009032 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Kaplun P. V., Dykha A. V., and Gonchar V. A. Contact endurance of 40X steel in different media after ion nitriding and nitroquenching
за авторством: P. V. Kaplun, та інші
Опубліковано: (2017)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2017)
Low-cycle fatigue of steels after ion nitriding in hydrogen-free environments
за авторством: P. V. Kaplun, та інші
Опубліковано: (2016)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2016)
Impact of hydrogen on ion nitriding of steels
за авторством: P. V. Kaplun
Опубліковано: (2017)
за авторством: P. V. Kaplun
Опубліковано: (2017)
The influence of ion nitriding modes on fretting-fatigue of 40X steel
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)
The impact of hydrogen-free ion nitriding on physicomechanical and performance characteristics of hard alloys T5K10 and T15K6
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)
Features of formation of a diffusive layer at ionic nitration in hydrogen free media
за авторством: V. G. Kaplun
Опубліковано: (2003)
за авторством: V. G. Kaplun
Опубліковано: (2003)
The influence of energy parameters of hydrogen-free nitriding in the glow discharge on physicochemical properties of 40X steel
за авторством: N. M. Stechyshyna, та інші
Опубліковано: (2021)
за авторством: N. M. Stechyshyna, та інші
Опубліковано: (2021)
Corrosion fatigue endurance of steel 45 after surface nanostructuring by mechanical pulse treatment in different environments
за авторством: V. I. Kyryliv, та інші
Опубліковано: (2024)
за авторством: V. I. Kyryliv, та інші
Опубліковано: (2024)
Influence of thermal treatment on the endurance of 65H steel springs
за авторством: O. P. Ostash, та інші
Опубліковано: (2017)
за авторством: O. P. Ostash, та інші
Опубліковано: (2017)
Kinetics of wear of steels with diffusion coatings under rolling friction
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
Influence of steels ion nitriding in glow discharge on layers structure and properties
за авторством: M. S. Stechyshyn, та інші
Опубліковано: (2017)
за авторством: M. S. Stechyshyn, та інші
Опубліковано: (2017)
The use of the structural approach in assessing the effectiveness of gas and ion nitriding steels
за авторством: O. V. Sobol, та інші
Опубліковано: (2015)
за авторством: O. V. Sobol, та інші
Опубліковано: (2015)
Physicochemical properties of surface layers of 40X steel after hydrogen-free nitration in glow discharge
за авторством: M. S. Stechyshyn, та інші
Опубліковано: (2019)
за авторством: M. S. Stechyshyn, та інші
Опубліковано: (2019)
Corrosion-fatigue endurance of steel 35 in tap water under additional cavitation loading
за авторством: O. T. Tsyrulnyk, та інші
Опубліковано: (2021)
за авторством: O. T. Tsyrulnyk, та інші
Опубліковано: (2021)
Reliability control and endurance of friction units of polygraphic machines
за авторством: T. A. Roik, та інші
Опубліковано: (2011)
за авторством: T. A. Roik, та інші
Опубліковано: (2011)
Titanium and vanadium in steels for nitriding
за авторством: O. V. Bilotskyi, та інші
Опубліковано: (2013)
за авторством: O. V. Bilotskyi, та інші
Опубліковано: (2013)
Strength and endurance of powder BT1-0and Fe-18Cr-14Ni alloys in high-temperature hydrogen
за авторством: A. D. Ivasyshyn, та інші
Опубліковано: (2012)
за авторством: A. D. Ivasyshyn, та інші
Опубліковано: (2012)
Ion-plasma nitriding of inner cylindrical surfaces of products
за авторством: I. V. Smyrnov, та інші
Опубліковано: (2022)
за авторством: I. V. Smyrnov, та інші
Опубліковано: (2022)
Corrosion and hydrogenation of 17H1S-U steel in hydrogen sulfide media of different concentrations
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2020)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2020)
Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
за авторством: A. Nakonieczny, та інші
Опубліковано: (2012)
за авторством: A. Nakonieczny, та інші
Опубліковано: (2012)
Evaluating Approaches to Estimating Endurance and Cyclic Cracking Resistance of Metal Structure Components
за авторством: T. I. Matchenko, та інші
Опубліковано: (2017)
за авторством: T. I. Matchenko, та інші
Опубліковано: (2017)
The influence of cyclic processing on phase composition of ion-nitrided surface layersof 12X18H10T steel
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2012)
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2012)
Negative ions in cryogenic media
за авторством: V. Shikin, та інші
Опубліковано: (2017)
за авторством: V. Shikin, та інші
Опубліковано: (2017)
Nitriding of the steels in gas arc low pressure discharge
за авторством: A. A. Andreev, та інші
Опубліковано: (2006)
за авторством: A. A. Andreev, та інші
Опубліковано: (2006)
The influence of hydrogen on the properties of oxidized and nitrided Zr–1% Nb alloy
за авторством: V. S. Trush, та інші
Опубліковано: (2021)
за авторством: V. S. Trush, та інші
Опубліковано: (2021)
Hydrogen Brittleness and Hydrogen Plasticity of Steel
за авторством: V. A. Soshko, та інші
Опубліковано: (2014)
за авторством: V. A. Soshko, та інші
Опубліковано: (2014)
Nitride hardening influence on the phase transformation and the formation of high-carbon steel structure upon cooling after austenitizing
за авторством: Ya. Shypytsyn, та інші
Опубліковано: (2014)
за авторством: Ya. Shypytsyn, та інші
Опубліковано: (2014)
Influence of degree of ammonia dissociation on nitriding of stainless steels
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2009)
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2009)
Structure of aluminum nitride layers formed under ion-plasma spraying
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2013)
за авторством: Z. A. Duriahina, та інші
Опубліковано: (2013)
Modelling of carbides and nitrides formation in microalloyed steel. Forecasting of influence of deviations of Al, Ti and Nb concentrations on carbides and nitrides precipitation in steel. Conferring 2
за авторством: A. I. Trotsan, та інші
Опубліковано: (2014)
за авторством: A. I. Trotsan, та інші
Опубліковано: (2014)
Ion-beam deposition of ultrathin metall nitride and oxynitride films process stabilization
за авторством: A. V. Derevjanko, та інші
Опубліковано: (2008)
за авторством: A. V. Derevjanko, та інші
Опубліковано: (2008)
Residual stresses in the structural steel layers nitrided in decaying discharge
за авторством: M. S. Stechyshyn, та інші
Опубліковано: (2018)
за авторством: M. S. Stechyshyn, та інші
Опубліковано: (2018)
Influence of degree of dissociation of ammonia on nitriding of non-rusting steels
за авторством: V. I. Dubodielov, та інші
Опубліковано: (2009)
за авторством: V. I. Dubodielov, та інші
Опубліковано: (2009)
Low-temperature ion-plasma deposition technology of nanostructured films of aluminum and boron nitrides
за авторством: M. S. Zaiats, та інші
Опубліковано: (2021)
за авторством: M. S. Zaiats, та інші
Опубліковано: (2021)
Influence of dispersion nitride hardening on formation of structure of high-carbon steels
за авторством: Ya. Shypytsyn, та інші
Опубліковано: (2017)
за авторством: Ya. Shypytsyn, та інші
Опубліковано: (2017)
Hydrogen permeability of reactor steels
за авторством: V. V. Fedorov
Опубліковано: (2011)
за авторством: V. V. Fedorov
Опубліковано: (2011)
The structure and properties of surface layers in iron after preliminary plastic deformation and nitriding
за авторством: L. D. Demchenko, та інші
Опубліковано: (2015)
за авторством: L. D. Demchenko, та інші
Опубліковано: (2015)
Antifriction characteristics of VT6 titanium alloy after thermohydrogen processing and following nitriding
за авторством: I. N. Pogreljuk, та інші
Опубліковано: (2015)
за авторством: I. N. Pogreljuk, та інші
Опубліковано: (2015)
Analysis of Gas Nitriding Characteristics under Different Cold Hardening and Nitriding Pressure Conditions for Low-Carbon Low-Alloy Steel
за авторством: Zhou, Z A., та інші
Опубліковано: (2018)
за авторством: Zhou, Z A., та інші
Опубліковано: (2018)
Laser-Excited Acoustics for Contact-Free Inspection of Aerospace Composites
за авторством: M. Brauns, та інші
Опубліковано: (2021)
за авторством: M. Brauns, та інші
Опубліковано: (2021)
Схожі ресурси
-
Kaplun P. V., Dykha A. V., and Gonchar V. A. Contact endurance of 40X steel in different media after ion nitriding and nitroquenching
за авторством: P. V. Kaplun, та інші
Опубліковано: (2017) -
Low-cycle fatigue of steels after ion nitriding in hydrogen-free environments
за авторством: P. V. Kaplun, та інші
Опубліковано: (2016) -
Impact of hydrogen on ion nitriding of steels
за авторством: P. V. Kaplun
Опубліковано: (2017) -
The influence of ion nitriding modes on fretting-fatigue of 40X steel
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018) -
The impact of hydrogen-free ion nitriding on physicomechanical and performance characteristics of hard alloys T5K10 and T15K6
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)