Buchumschlag

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	N. E. Stakhniv, L. N. Devin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001042743
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Investigation of cutting temperature in turning cutters with diamond-carbide plates
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
von: L. N. Devin, et al.
Veröffentlicht: (2019)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

Determining shock hardness and micro hardness of nonferrous metals and their alloys
von: O. O. Kotrechko
Veröffentlicht: (2016)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Axial force when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Modification of high speed steels by nanostructured materials for manufacture cutting inserts cutters of mining machines
von: L. V. Sudnik, et al.
Veröffentlicht: (2017)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
von: N. E. Stakhniv, et al.
Veröffentlicht: (2018)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
von: N. E. Stakhniv
Veröffentlicht: (2017)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
von: B. V. Stefaniv
Veröffentlicht: (2013)

Effect of damping properties of cutters on the probability of failure of the CBN plates
von: L. M. Devin, et al.
Veröffentlicht: (2016)

Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
von: H. P. An, et al.
Veröffentlicht: (2014)

Effect of structure of joint zone of diamond layer with hard-alloy substrate of brazed cutters on their service life
von: B. V. Stefaniv, et al.
Veröffentlicht: (2018)

The correlation model of acoustic emission in fine diamond turning
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

Development of technology of brazing of diamond-hardalloy cutters
von: B. F. Stefaniv
Veröffentlicht: (2013)

Mitigation method for a round plate under the action of mass forces
von: O. O. Kilchynskyi, et al.
Veröffentlicht: (2018)

Influence of the tool shape and location of cutters in it on the force distribution between the cutters at drilling gas-drainage boreholes
von: V. G. Krasnik
Veröffentlicht: (2013)

Electromagnetic processes in an inductor system with a single thin round turn with a cut above a thin metal sheet
von: Gnatov, A. V.
Veröffentlicht: (2012)

Investigation of acoustic emission signal on the stage of penetretion and exit when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2022)

Week fragmentation of round plates
von: Brodskii, R.Ye., et al.
Veröffentlicht: (2012)

An increase of operating characteristics of cBN cutters by improving their damping properties
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Algoritmes of salculating the probabilities of market prices for products nonferrous metals and alloys
von: V. P. Samaraj
Veröffentlicht: (2013)

Peculiarities of calculating the geometric parameters of a diamond cutter for the formation of ring Fresnel lenses
von: Зенін, В. М., et al.
Veröffentlicht: (2024)

Creation of New Types of Competitive Cutting Plates and Manufacture of Pilot Instrument Part for Mechanical Processing Hard-To-Machine Materials
von: C. A. Klymenko, et al.
Veröffentlicht: (2018)

The use of the computer modeling for improving operational characteristics of hard-alloy matrices of high-pressure apparatuses intended for sintering diamond-hard alloy plates
von: S. I. Shestakov, et al.
Veröffentlicht: (2017)

The influence of anticorrosive multilayer coating on thermoelasticity of round plates
von: N. O. Hembara
Veröffentlicht: (2013)

Secondary hardness and heat resistance of high-speed steels
von: O. V. Movchan, et al.
Veröffentlicht: (2020)

The fundamentals of synthesis of modified layers on cutting-tool hard alloys
von: S. S. Samotugin, et al.
Veröffentlicht: (2017)

Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
von: B. C. Liu, et al.
Veröffentlicht: (2017)

Tinless bronze bulky scrap processing experience under conditions of non-special nonferrous castings workshop
von: A. S. Mamedov, et al.
Veröffentlicht: (2009)

Comparison of results of the determination of the stresses on the cutting edges from diamond monocrystals by analytic 2-D and 3-D by the finite element method
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Shaft cutters for geological exploration
von: V. I. Spirin, et al.
Veröffentlicht: (2017)