The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride

The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	M. Ociepa, M. Jenek, E. Feldshtein, K. Leksycki
Format:	Artikel
Sprache:	English
Veröffentlicht:	2019
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001042755
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride
von: Ociepa, M., et al.
Veröffentlicht: (2019)

On the wear comparative analysis of cutting tools made of composite materials based on polycrystalline cubic boron nitride when finish turning of AISI D2 (EN X153CrMoV12) steel
von: Ociepa Michał, et al.
Veröffentlicht: (2018)

Ensuring fatigue life of parts during finish turning with cubic boron nitride tools
von: K. S. Barandych, et al.
Veröffentlicht: (2018)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Untitled
von: M. Ociepa, et al.
Veröffentlicht: (2018)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
von: N. E. Stakhniv
Veröffentlicht: (2017)

Synthesis of cubic boron nitride with using of dense modifications of boron nitride polycrystalline grains
von: I. O. Borymskyi
Veröffentlicht: (2017)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Special features of the applications of cutting tools from polycrystalline cubic boron nitride with protective coatings
von: S. A. Klimenko, et al.
Veröffentlicht: (2017)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Diamond polycrystalline composite material with dispersion-hardened nickel_based additive
von: E. E. Ashkinazi, et al.
Veröffentlicht: (2013)

Synthesis and performance study of polycrystalline cubic boron nitride using WC–B4C–Al2O3 as the binder
von: Peicheng Mo, et al.
Veröffentlicht: (2022)

Симпозиум МАС № 153 «Галактические балджи»
Veröffentlicht: (1991)

On twinning in ultrahard nanocrystalline cubic boron nitride
von: V. L. Solozhenko, et al.
Veröffentlicht: (2020)

Сучасні історичні студіювання документа: en bloc et en détail
von: Бездрабко, В.В.
Veröffentlicht: (2009)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
von: N. E. Stakhniv, et al.
Veröffentlicht: (2018)

Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts
von: Anshuman Das, et al.
Veröffentlicht: (2019)

The Fine Structure of the Surface Layer and Tribological Properties of QT 41Cr4 Steel Parts after Finish Turning Machining with Coated Cutters
von: M. Enek, et al.
Veröffentlicht: (2014)

Tribological characteristics of superhard materials cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)

Influence of boron doping on the photosensitivity of cubic silicon carbide
von: V. N. Rodionov, et al.
Veröffentlicht: (2019)

Equation of state of single-crystal cubic boron phosphide
von: Le Godec, Y., et al.
Veröffentlicht: (2014)

Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)

Линейчатые поверхности в Eⁿ
von: Гончарова, О.А.
Veröffentlicht: (2006)

Exploration of spectra of periodic Comet 153P/Ikeya−Zhang
von: Churyumov, K.I., et al.
Veröffentlicht: (2005)

The effect of doping on the lattice parameter and properties of cubic boron nitride
von: V. A. Mukhanov, et al.
Veröffentlicht: (2020)

Highly porous cubic boron nitride wheels for dry grinding
von: V. K. Starkov
Veröffentlicht: (2013)

The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

On the mechanism of hardening wurtzitic boron nitride under an indenter
von: G. S. Olejnik
Veröffentlicht: (2013)

Ivan Rakovsky as en European encyclopediographer
von: N. I. Chernysh
Veröffentlicht: (2020)

Динамические системы в Tm×Eⁿ
von: Самойленко, А.М.
Veröffentlicht: (1991)

Ti-NbN-Al2O3 and Nb-NbN-Al2O3 multilayer vacuum-arc coatings on tools of cubic boron nitride-polycrystalline superhard materials
von: S. A. Klimenko, et al.
Veröffentlicht: (2007)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

Structure of gold islet films on thermobaric sintered cubic boron nitride
von: I. P. Fesenko, et al.
Veröffentlicht: (2020)

Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride
von: S. N. Dub, et al.
Veröffentlicht: (2017)

It was happiness to work side by side with him
von: S. V. Klymenko
Veröffentlicht: (2001)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Specialised computer simulator "SimEnPhysiol"
von: Grygoryan, R.D., et al.
Veröffentlicht: (2018)