Microstructures and properties of Fe–Co–Cu pre-alloyed powder for geological diamond bits

Microstructures and properties of Fe–Co–Cu pre-alloyed powder for geological diamond bits

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	D. Xie, H. Qin, F. Lin, X. Pan, C. Chen, L. Xiao, J. Chen, P. Mo
Format:	Artikel
Sprache:	English
Veröffentlicht:	2019
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001042763
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
von: D. Xie, et al.
Veröffentlicht: (2018)

Interface effect and thermodynamic behavior between diamond grit and Fe‒Co‒Cu pre-alloyed powders
von: D. Xie, et al.
Veröffentlicht: (2021)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
von: Delong Xie, et al.
Veröffentlicht: (2018)

Effect of graphite addition on impregnated diamond bit properties
von: Lanlan Xie, et al.
Veröffentlicht: (2019)

D-optimal mixture design of Fe-based pre-alloyed diamond bit matrix with low liquid phase content
von: Zh. Wang, et al.
Veröffentlicht: (2021)

Research on the structure and properties of high temperature and high pressure composite PCBN tool materials
von: Mo Peicheng, et al.
Veröffentlicht: (2023)

Influence of diamond defects on workability drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2017)

Evaluation of polycrystalline diamond tools in milling of pre-sintered and fully-sintered zirconia ceramics
von: J. Xu, et al.
Veröffentlicht: (2022)

Study of influence of ultrafine powder of natural diamond on the microstructure of the matrix on the basis of tin bronze
von: M. N. Safonova, et al.
Veröffentlicht: (2016)

Development of single walled diamond bits with shorter sectors
von: A. A. Karakozov, et al.
Veröffentlicht: (2016)

Preparation, Properties, and Microstructure of Graphite Powder-Containing Conductive Concrete
von: Liu, S.H., et al.
Veröffentlicht: (2019)

Character of wear of synthetic diamonds differentstrength in impregnated drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2018)

Thermal stability of solid solutions formed by ultrasonic milling of Cu–Co and Cu–Fe powder mixtures
von: V. M. Nadutov, et al.
Veröffentlicht: (2017)

Thermal stability of solid solutions formed by ultrasonic milling of Cu–Co and Cu–Fe powder mixtures
von: V. M. Nadutov, et al.
Veröffentlicht: (2017)

Evaluation of diamond-coated tools in drilling high-strength CFRP composites
von: J. Xu, et al.
Veröffentlicht: (2022)

Chinese scientific drilling №1 well diamonds coring bit technology
von: Zhang Xiaoxi, et al.
Veröffentlicht: (2010)

Comparative estimation of the performance of drilling bits with diamond-containing matrix and inserts from diamond-containing composites
von: O. P. Vynohradova, et al.
Veröffentlicht: (2022)

Effect of Si and Mn on Microstructure and Mechanical Properties of Vacuum Suction Casting Al–4.5Cu Alloy
von: He, T., et al.
Veröffentlicht: (2018)

Implementation of the rock thermal cyclic weakening in the diamond drill bits with an elastic console
von: V. F. Gankevich, et al.
Veröffentlicht: (2018)

Influence of durability of synthetic diamonds on efficiency of destruction of mountain rock drill bits
von: A. M. Isonkin
Veröffentlicht: (2016)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Tribological properties of calcium carbonate powders modified with Tween 40 as lubricant additives
von: Chen Tianhua
Veröffentlicht: (2017)

Analysis of the interactions in the Cu–Ti–Diamond and Co–W–diamond systems in wetting diamond polycrystals and infiltration of UDD diamond nanopowder at high pressure and temperature
von: E. M. Lutsak, et al.
Veröffentlicht: (2014)

Diagnosis of performance characteristic of diamond powders
von: M. N. Safonova, et al.
Veröffentlicht: (2017)

Composite materials of diamond−(Co–Cu–Sn) system with improved mechanical characteristics. Part 1. The influence of hot re-pressing on the structure and properties of diamond−(Co–Cu–Sn) composite
von: M. V. Novikov, et al.
Veröffentlicht: (2015)

Efficiency of the use of diamond drilling bits with a different intensity of the destruction of the mountain rocks
von: A. M. Isonkin
Veröffentlicht: (2017)

Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)

Phase composition, microstructure and wear properties of Ni/Ni3Si composites prepared by mechanical alloying
von: Junxi Zhang, et al.
Veröffentlicht: (2021)

Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
von: H. L. Tian, et al.
Veröffentlicht: (2014)

Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
von: J. Zhang, et al.
Veröffentlicht: (2020)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
von: B. V. Stefaniv
Veröffentlicht: (2013)

Luminescent and radiation characteristics of monocrystalline diamond powders
von: O. G. Lysenko, et al.
Veröffentlicht: (2019)

Effect of temperature on sintering of PCBN with Ti–Si3N4–AIN–Y2O3 additives
von: Mo Peicheng, et al.
Veröffentlicht: (2021)

Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
von: Tian, H.L., et al.
Veröffentlicht: (2014)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
von: V. P. Afanasev, et al.
Veröffentlicht: (2016)

The influence of CrB2 additive on the structure and properties of diamond−(Co–Cu–Sn) composite
von: M. V. Novikov, et al.
Veröffentlicht: (2016)

Diamond composite materials diamond–Fe–Cu–Ni–Sn with predictable stable characteristics
von: V. A. Mechnyk
Veröffentlicht: (2012)

Oxidation of the powder diamonds of detonation and static methods of synthesis
von: A. N. Panova
Veröffentlicht: (2016)

Morphology and spectral characteristics of octahedral diamond crystals from Yubileinaya diamond pipe (Yakutiya)
von: Lin Fang
Veröffentlicht: (2013)

Polaron Rashba effect in an asymmetric quantum dot
von: Shu-Ping Shan, et al.
Veröffentlicht: (2014)