Buchumschlag

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	A. N. Smirnov, D. V. Rjabyj, A. P. Verzilov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001046295
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet CCM. Report 1
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Estimation of hydrodynamic factors for increasing the efficiency of the steel casting at the multistrand billet ccm
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Prevention the occurrence of flakes-like defects in the round billets
von: H. V. Levchenko, et al.
Veröffentlicht: (2015)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Prospects for improving the quality of railway wheels made of a continuous casted billet
von: A. I. Babachenko, et al.
Veröffentlicht: (2013)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)

Quality of low-carbon rod produced from billets and bloom continuous castings
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Structure and properties of hot-rolled boiler tubes made from continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)

Features of heat-resistant properties of metal of not-rolled boilertubes produced from continuously cast billets of steel 20
von: L. V. Opryshko, et al.
Veröffentlicht: (2020)

Research of the effect of the cooling rate during solidification of a continuously cast billet on the features of the dendritic structure of carbon steel
von: O. I. Babachenko, et al.
Veröffentlicht: (2020)

Application of Electromagnetic Forces in Continuous Steel Casting
von: V. I. Dubodelov, et al.
Veröffentlicht: (2019)

Alloying of surface layer of cast billet at casting
von: V. I. Tsotsko, et al.
Veröffentlicht: (2009)

Investigation of billet crystal structure formation features during forced stirring of its liquid core
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

The influence of the cooling regime and chemical composition on dendritic structure formation of the ingot and continuous cast billets
von: O. I. Babachenko, et al.
Veröffentlicht: (2015)

Simulation of solid shell deformation conditions in the billet continuous casters mould
von: A. N. Smirnov, et al.
Veröffentlicht: (2009)

Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)

Influence of periodic oscillations and fluctuations of the metal level in the crystallizer on the continuous casting process
von: O. M. Smirnov, et al.
Veröffentlicht: (2018)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

Hereditary relationship of dendritic and grain structure of continuously cast billets made of medium-carbon steel
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Modeling of conditions of formation oscillation marks on the surface of continuous casting ingot
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Modern methods of organizing directionsstreams in the tundish continuous casting machine
von: A. N. Smirnov, et al.
Veröffentlicht: (2017)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
von: A. P. Verzilov
Veröffentlicht: (2019)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: O. M. Khoroshylov, et al.
Veröffentlicht: (2019)

The impact of vibrating and gas-impulsive Treatment of solidifying metal on hydrodynamic processes of formation of Continuous-Cast billets
von: A. S. Nuradinov, et al.
Veröffentlicht: (2014)

Influence of carbon content on features of the mechanism peritectic crystallisation and the dendritic structure characteristics of continuous cast billets of 09H2S steel
von: H. V. Levchenko, et al.
Veröffentlicht: (2012)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
von: A. P. Gopkalo, et al.
Veröffentlicht: (2011)

Influenced by of oscillation and parameters of oscillations of the moldon the surface quality of continuous casting ingots
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2015)

Advanced technology for continuous casting of steel: opportunities and challenges
von: A. N. Smirnov
Veröffentlicht: (2014)

Electroslag casting of billets of high-pressure stop valve bodies
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2009)