Buchumschlag

Features of thyxoforming of high-strength aluminum alloy VAL10 in conditions of pulse pressing

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	V. P. Holovachenko, A. H. Pryhunova, L. K. Shenevidko, N. P. Isaicheva, M. V. Kosheliev, A. H. Vernydub
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001372432
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The influence of Temperature and rotary Treatment on hot-shortness of the high-strength aluminium alloy Val 10
von: V. P. Golovachenko, et al.
Veröffentlicht: (2014)

Investigation of Phase Transformations During Crystallization of Aluminum Alloys by Hardening-Microstructural Analysis
von: A. H. Pryhunova, et al.
Veröffentlicht: (2020)

Influence of alloying and mhd-Processing of melt on structure and Properties of high-strength aluminium casting alloys of val10 Type. report 2
von: V. I. Dubodelov, et al.
Veröffentlicht: (2014)

Features of Rotary Processing of Aluminum Melts in the Ladle in the Rheo-Thixocasting Processes
von: V. P. Holovachenko, et al.
Veröffentlicht: (2020)

The effect of friction stir welding on corrosion resistance of high strength aluminum alloys
von: I. O. Hnatenko, et al.
Veröffentlicht: (2019)

Study of precision forging technology for complicated high strength aluminum alloy part
von: Junwei Cheng, et al.
Veröffentlicht: (2017)

Effect of neutron irradiation on the structure and strength of the SAV 1 aluminum alloy
von: S. A. Alikulov, et al.
Veröffentlicht: (2022)

Structure and service properties of welded joints of high-strength steels, aluminum and titanium alloys
von: L. I. Markashova, et al.
Veröffentlicht: (2017)

Butt resistance welding by burning-off of high-strength heat-hardenable aluminum alloys
von: K. V. Gushchin, et al.
Veröffentlicht: (2016)

Environmentally Friendly Method to Finish Refining Aluminum Alloys
von: V. P. Golovachenko, et al.
Veröffentlicht: (2019)

The influence of technological factors on the properties of high-strength aluminum alloy of the Al-Zn-Mg-Cu system
von: A. M. Verkhovliuk, et al.
Veröffentlicht: (2020)

Synthesis of high-strength Ti-10V-2Fe-3Al alloy with powder metallurgy approach
von: D. H. Savvakin, et al.
Veröffentlicht: (2009)

Structure and properties of high-strength titanium alloy Ti-10-2-3 of electroslag remelting
von: I. V. Protokovilov, et al.
Veröffentlicht: (2017)

The influence of pulse electromagnetic field treatment on the stress state of AMg6 aluminum alloy
von: L. M. Lobanov, et al.
Veröffentlicht: (2021)

Control the properties of high-strength aluminum alloy systems Al-Zn-Mg-Cu to prevent premature failure
von: O. V. Abolikhina, et al.
Veröffentlicht: (2019)

Marija Andrijivna Val&#039;o
von: T. Kulchytska
Veröffentlicht: (2005)

Structural and phase transformations in the hypoeutectic alloys of the Al – Si – Fe system treated in the liquid state by a unipolar electric current pulses
von: A. H. Pryhunova, et al.
Veröffentlicht: (2017)

The ternary eutectic in cobalt alloys with aluminum and tungsten
von: H. P. Dmytriieva, et al.
Veröffentlicht: (2009)

Prediction of the Conditions for the Formation of a Thin Strip of High-Strength Aluminum Alloys, Depending on the Speed of Casting Rolls and Technological Parameters
von: M. I. Tarasevych, et al.
Veröffentlicht: (2020)

Influence of pulsed electromagnetic field treatment on stressed and deformed state of circumferential welded joints of aluminum AMg6 alloy
von: L. M. Lobanov, et al.
Veröffentlicht: (2020)

Influence of pulsed electric current on thin structure of aluminum AMh6 alloy under electrodynamic treatment
von: L. I. Markashova, et al.
Veröffentlicht: (2018)

Effect of mode of electron beam welding, heat treatment and plastic deformation on strength of joints of aluminum 1570 alloy
von: V. V. Skriabinskyi, et al.
Veröffentlicht: (2020)

Microstructure and property modifications in surface layers of a AA6111 aluminum alloy induced by high-current pulsed relativistic electron beam
von: Myla, D.E., et al.
Veröffentlicht: (2022)

Hydrogen refining of aluminum alloys
von: F. M. Kotljarskij
Veröffentlicht: (2018)

Presentation of Ukrainian Science in Scientometric Superstructure SciVal elsevier Corporation
von: Ye. Kukharchuk
Veröffentlicht: (2015)

Development of new high-strength titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)

Weldability of high-strength alloyed steels with yield strength of 590...785 MPa
von: V. D. Poznjakov
Veröffentlicht: (2018)

Investigation of &quot;wet&quot; pressing process applied to the production of T5K10 alloy
von: V. S. Panov, et al.
Veröffentlicht: (2016)

Electron beam welding of complexly-alloyed high-strength titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)

The History of formation of Verchniy Val and Nyzhniy Val streets as components of complex urban complex in Kyiv Podil in the context of protection of Kyiv heritage during 11th–19th c.
von: V. V. Naumenko
Veröffentlicht: (2016)

The History of formation of Verchniy Val and Nyzhniy Val streets as components of complex urban complex in Kyiv Podil in the context of protection of Kyiv heritage during 11th – 19th c.
von: V. V. Naumenko
Veröffentlicht: (2015)

MAGNETIC-PULSE PRESSING OF ELECTRICAL CONNECTIONS FOR STRANDED WIRES
von: Samokhvalova, Zh. V., et al.
Veröffentlicht: (2019)

Strength and specifics of fracture of welded joints of high-strength aluminium alloys at low temperature
von: T. M. Labur
Veröffentlicht: (2011)

Extraordinary Flooding of Aluminum Alloy Castings
von: F. M. Kotliarskyi
Veröffentlicht: (2020)

The Role of Manganese and Liquid-Phase Electric Treatment on the Formation of Iron-Containing Phases in Predeutectic Alloys of the Al-Si-−Fe-Mn System
von: A. H. Pryhunova
Veröffentlicht: (2020)

Metallurgical peculiarities of welding of high- strength aluminium alloy 7025-T6
von: M. Olabode, et al.
Veröffentlicht: (2012)

Advantages of Casting Partially Crystallized Aluminum Alloys (Reocasting)
von: V. P. Golovachenko, et al.
Veröffentlicht: (2019)

High-strength eutectic alloys of the ternary Al – Si – Mg system, alloyed by zinc and copper
von: N. P. Korzhova, et al.
Veröffentlicht: (2015)

The influence of basic technological parameters on the layers bonding strength of the bimetal aluminum-copper
von: V. G. Zagorjanskij
Veröffentlicht: (2014)

Influence of complex impact on the formation of structure and thixotropic properties of cast high-strength aluminium alloys B95 AND D16
von: A. G. Prigunova, et al.
Veröffentlicht: (2018)