Influence of tempering modes on fine structure parameters, stress and hardness of 25Cr2Mo1V steel
Збережено в:
Дата: | 2019 |
---|---|
Автори: | S. V. Bobyr, H. V. Levchenko, Yu. Borysenko, N. O. Kutseva |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
2019
|
Назва видання: | Metal Science and Treatment of Metals |
Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001055103 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
-
The Nonequilibrium Thermodynamic Analysis of Process of Formation of Carbides in Chromium Steel During Tempering
за авторством: S. V. Bobyr
Опубліковано: (2014) -
Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies
за авторством: S. V. Bobyr, та інші
Опубліковано: (2012) -
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
за авторством: Belous, V.A., та інші
Опубліковано: (2021) -
Influence of welding modes on decarburization in the haz of R91 steel in welded joints of dissimilar steels after high-temperature tempering
за авторством: M. O. Nimko, та інші
Опубліковано: (2022) -
Formation of structure, phase composition and faulty substructure in the bulk- and differentially-hard-tempered rails
за авторством: V. E. Gromov, та інші
Опубліковано: (2014)