Buchumschlag

Formation of Fe-Cu-Ni-Sn-VN nanocrystalline matrix by vacuum hot pressing for diamond-containing composite. mechanical and tribological properties

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	V. A. Mechnik, N. A. Bondarenko, V. N. Kolodnitskij, V. I. Zakiev, I. M. Zakiev, S. R. Ignatovich, S. N. Dub, N. O. Kuzin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001063649
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Tribology of Fe–Cu-Ni-Sn and Fe-Cu–Ni-Sn–VN composites obtained by powder metallurgy methods
von: V. A. Mechnik, et al.
Veröffentlicht: (2019)

Features of influence of VN additive on the structure and properties of Fe-Cu-Ni-Sn composite produced by hot pressing
von: V. A. Mechnik, et al.
Veröffentlicht: (2018)

Influence of VN additive on the structure and strength characteristics of diamond-containing composites based on the Fe-Cu–Ni–Sn matrix formed by the method of cold pressing followed by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Physico-mechanical properties of composite diamond-containing materials based on Fe‒Cu–Ni–Sn‒VN matrices, sintered by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Phase formation and physical and mechanical properties of Fe–Cu–Ni–Sn–VN composites sintered by vacuum hot pressing for diamond stone-working tools
von: V. A. Mechnyk, et al.
Veröffentlicht: (2022)

Temperature effects in hot pressing composite diamond - (Fe–Cu–Ni–Sn) on the structure, mechanical and operational
von: V. A. Mechnik, et al.
Veröffentlicht: (2017)

Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
von: Gevorkyan, E., et al.
Veröffentlicht: (2017)

Composite materials of diamond−(Co–Cu–Sn) system with improved mechanical characteristics. Part 1. The influence of hot re-pressing on the structure and properties of diamond−(Co–Cu–Sn) composite
von: M. V. Novikov, et al.
Veröffentlicht: (2015)

Structure and compositional properties diamond materials (Fe-Cu-Ni-Sn) obtained by hot pressing
von: E. S. Hevorkian, et al.
Veröffentlicht: (2015)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
von: V. A. Mechnyk, et al.
Veröffentlicht: (2020)

Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)

Coupling effects of CH4/H2/Ar gas ratios and hot filament-substrate distance on the growth of nanocrystalline diamond
von: B. Deng, et al.
Veröffentlicht: (2020)

Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2016)

Use of simulation for homogenization of temperature field in Al2O3 workpiece in the process of hot vacuum pressing
von: V. A. Dutka, et al.
Veröffentlicht: (2020)

Tribological properties of vacuum arc Cr-O-N coatings in macro- and microscale
von: Kuprin, A.S., et al.
Veröffentlicht: (2016)

Nanocrystalline diamond CVD films: structure, properties and application prospects
von: I. I. Vyrovets, et al.
Veröffentlicht: (2010)

ТРИБОЛОГІЯ КОМПОЗИТІВ Fe-Cu-Ni-Sn і Fe-Cu-Ni-Sn-VN, ОДЕРЖАНИХ МЕТОДАМИ ПОРОШКОВОЇ МЕТАЛУРГІЇ
von: Мечник, В. А., et al.
Veröffentlicht: (2019)

Preparation of nanocrystalline Bi2Te3 via microwave-solvothermal synthesis and hot isostatic pressure
von: O. N. Maradudina, et al.
Veröffentlicht: (2012)

Structure and properties of hot-pressed materials based on AlB12C2
von: T. A. Prikhna, et al.
Veröffentlicht: (2017)

Special features of the heat capacity of detonation nanocrystalline diamond
von: O. O. Vasiliev, et al.
Veröffentlicht: (2015)

Determination of tribological and mechanical properties of SnPbCuSb (white metal) bearings
von: B. S. Ьnlь
Veröffentlicht: (2010)

Structure and properties of WC–Co composites sintered by vacuum hot pressing with different CrB2 content for drill bits
von: B. T. Ratov, et al.
Veröffentlicht: (2021)

Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)

Study of aeroabrasive wear of hot-pressed materials of the B4C–TiB2 system
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2014)

Tribological performance of titanium alloy Ti–6Al–4V via CVD-diamond coatings
von: S. H. Din, et al.
Veröffentlicht: (2018)

The structure of the chromium carbide steel that obtained by hot pressing
von: O. M. Shevchenko
Veröffentlicht: (2015)

Phase formation and physical-mechanical properties of WC–Co–CrB2 composites sintered by vacuum hot pressing for drill tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)

Vacuum-activated chromium plating of steel 20 in a nanocrystalline powder
von: S. G. Rudenkij
Veröffentlicht: (2012)

Nanocrystalline coatings by vacuum-arc method with usage of high frequency voltage
von: P. V. Turbin, et al.
Veröffentlicht: (2006)

Corrosion resistence of the hot-pressed B4C–VC ceramic system
von: O. N. Kajdash, et al.
Veröffentlicht: (2018)

Research of the influence of silicon impregnation on the structure and properties of hot-pressed silicon carbide
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2017)

Comparative study of mechanical and tribological characteristics of Fe–Cu–Ni–Sn composites with different CrB2 content under dry and liquid friction conditions
von: V. A. Mechnyk, et al.
Veröffentlicht: (2021)

The influence of CrB2 additive on the structure and properties of diamond−(Co–Cu–Sn) composite
von: M. V. Novikov, et al.
Veröffentlicht: (2016)

ОСОБЛИВОСТІ ВПЛИВУ ДОБАВКИ VN НА СТРУКТУРУ ТА ВЛАСТИВОСТІ КОМПОЗИТУ Fe-Cu-Ni-Sn, ОТРИМАНОГО ГАРЯЧОГО ПРЕСУВАННЯ
von: Мечник, В. А., et al.
Veröffentlicht: (2018)

Diamond composite materials diamond–Fe–Cu–Ni–Sn with predictable stable characteristics
von: V. A. Mechnyk
Veröffentlicht: (2012)

Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
von: I. M. Nekljudov, et al.
Veröffentlicht: (2011)

The effect of the duration of external uniaxial compression on the density of hard alloys VK20 and VN20 during their final sintering in vacuum
von: V. P. Bondarenko, et al.
Veröffentlicht: (2019)

Research of the influence of siliconizing on the structure and properties of hot-pressed polycrystalline silicon carbide
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2018)

The influence of hot isostatic pressing on the structure and mechanical properties of nickel heatproof alloys
von: O. S. Serhiienko, et al.
Veröffentlicht: (2011)