Buchumschlag

The influence of design parameters of a production unit on the temperature differential in a sample during high-speed sintering under pressure

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	V. A. Dutka, A. L. Maistrenko, V. H. Kulych
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001063652
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Using of modelling for minimization of temperature drop in B4C-sample during high-speed sintering under pressure
von: V. A. Dutka, et al.
Veröffentlicht: (2019)

Modeling of the temperature field in a high-pressure apparatus during sintering of large-sized products based on boron carbide
von: V. A. Dutka, et al.
Veröffentlicht: (2020)

Modeling of the thermal state of a high pressure apparatus cell during the sintering of large-sized carbide boron products
von: V. A. Dutka, et al.
Veröffentlicht: (2019)

Transformations during liquid-phase sintering of high-speed alloy powders
von: O. V. Movchan, et al.
Veröffentlicht: (2019)

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Computer simulation of the temperature field in sintering carbide composites when induction and beam heatings are used
von: V. A. Dutka
Veröffentlicht: (2013)

Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
von: Ya. Z. Aygьzer, et al.
Veröffentlicht: (2021)

Icrease of strength of the composites based on diamond during the sintering of them in terms of the high pressure
von: N. O. Rusinova
Veröffentlicht: (2017)

Features of AE monitoring at high-speed cyclic cantilever bending of samples
von: Ju. G. Bezymjannyj, et al.
Veröffentlicht: (2012)

Analysis of sintering machine grate bar designs
von: V. N. Zakharchenko, et al.
Veröffentlicht: (2015)

Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
von: V. S. Urbanovich, et al.
Veröffentlicht: (2018)

Design methods for reducing noise and interferences in channels with lumped parameters in high-speed data processing
von: A. N. Tynynyka
Veröffentlicht: (2019)

CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
von: Khlopenko, N. J.
Veröffentlicht: (2020)

A simple low-temperature adiabatic calorimeter for small samples
von: Bagatskii, M.I., et al.
Veröffentlicht: (2011)

A simple low-temperature adiabatic calorimeter for small samples
von: M. I. Bagatskii, et al.
Veröffentlicht: (2011)

Results of experimental studies of a jet-reactive turbine: Effect of pressure on rotation speed
von: Baha, Tetiana, et al.
Veröffentlicht: (2025)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
von: U. Зavdar, et al.
Veröffentlicht: (2014)

TiN crystal structure features in cBN—TiN—Al composite sintered at high pressures and temperatures
von: N. M. Biliavyna, et al.
Veröffentlicht: (2022)

Numerical modeling of liquid–phase infiltration in the process of sintering ceramic composites
von: V. A. Dutka
Veröffentlicht: (2014)

Rational design of gating system for grate kiln and sintering machines
von: A. A. Rudnitskij, et al.
Veröffentlicht: (2014)

Construction of optimal cluster sample with consideration for design-effect
von: A. Pihida
Veröffentlicht: (2014)

Construction of optimal cluster sample with consideration for design-effect
von: A. Pigida
Veröffentlicht: (2014)

Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
von: E. M. Lutsak, et al.
Veröffentlicht: (2017)

The influence of the rate of increase in gas pressure during vacuum-compression sintering on the structure and properties of VK6M hard alloy
von: M. M. Prokopiv, et al.
Veröffentlicht: (2023)

Production of polycrystalline materials by sintering of nanodispersed diamond nanopowders at high pressure. Review
von: O. O. Bochechka
Veröffentlicht: (2018)

Mechanism of compacting the diamond nanopowder of detonation synthesis at its high pressure sintering
von: O. O. Bochechka
Veröffentlicht: (2017)

Hydrogen influence on the durability of a thin-walled sample under high-temperature creep
von: O. Y. Chepil
Veröffentlicht: (2024)

Determination of material parameters and thickness of industrial magnetodielectric and ferrite samples with a metal substrate
von: V. N. Mizernik, et al.
Veröffentlicht: (2010)

Phase and structural evolution during mechanical alloying, subsequent annealing and pressure sintering of AlCuNiFeCr high entropy alloy
von: O. I. Yurkova, et al.
Veröffentlicht: (2015)

Investigation of the influence of high-speed sintering modes on the structure and properties of WC-based carbide composite with high entropy bonding
von: O. A. Yurkova, et al.
Veröffentlicht: (2024)

Sintering of superhard instrumen talpurpose composites of the BL group in the cBN—NbC—Al system under high pressure and high temperature conditions
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2020)

Mathematical Model of Device of Changing the Speeds Based on Switching Differential Mechanisms
von: Ja. Antonjuk, et al.
Veröffentlicht: (2019)

Investigation of the structure formation during sintering pcd in hpht condition
von: V. Z. Turkevych, et al.
Veröffentlicht: (2019)

Studying the design parameters impact of a batch reactor over temperature mode for biomass-to-diesel energy conversion process
von: M. O. Budko
Veröffentlicht: (2016)

Correlation dependences of petrophysical parameters of rocks of the Ukrainian Shield under different pressures and temperatures
von: Karnaukhova, O.Ye.
Veröffentlicht: (2025)

Influence of the time of contact pressure increase on temperature in the pad-disc tribosystem during braking
von: K. Topchevska
Veröffentlicht: (2018)

A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)

A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)

A method of designing flow parts of the high-pressure shaft fan and blower fans
von: N. I. Gritsenko, et al.
Veröffentlicht: (2016)

Influence of sintering temperature on volume electric resistance and absorption of electromagnetic energy of pressureless sintered AlN–SiC composites
von: V. I. Chasnyk, et al.
Veröffentlicht: (2022)