Cover Image

The influence of design parameters of a production unit on the temperature differential in a sample during high-speed sintering under pressure

Saved in:

Bibliographic Details
Date:	2019
Main Authors:	V. A. Dutka, A. L. Maistrenko, V. H. Kulych
Format:	Article
Language:	English
Published:	2019
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001063652
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Using of modelling for minimization of temperature drop in B4C-sample during high-speed sintering under pressure
by: V. A. Dutka, et al.
Published: (2019)

Modeling of the temperature field in a high-pressure apparatus during sintering of large-sized products based on boron carbide
by: V. A. Dutka, et al.
Published: (2020)

Modeling of the thermal state of a high pressure apparatus cell during the sintering of large-sized carbide boron products
by: V. A. Dutka, et al.
Published: (2019)

Transformations during liquid-phase sintering of high-speed alloy powders
by: O. V. Movchan, et al.
Published: (2019)

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
by: V. P. Bondarenko, et al.
Published: (2017)

Computer simulation of the temperature field in sintering carbide composites when induction and beam heatings are used
by: V. A. Dutka
Published: (2013)

Icrease of strength of the composites based on diamond during the sintering of them in terms of the high pressure
by: N. O. Rusinova
Published: (2017)

Effect of sintering temperature and applied pressure on the properties of boron carbide- silicon carbide composites
by: Ya. Z. Aygьzer, et al.
Published: (2021)

Analysis of sintering machine grate bar designs
by: V. N. Zakharchenko, et al.
Published: (2015)

Features of AE monitoring at high-speed cyclic cantilever bending of samples
by: Ju. G. Bezymjannyj, et al.
Published: (2012)

Design methods for reducing noise and interferences in channels with lumped parameters in high-speed data processing
by: A. N. Tynynyka
Published: (2019)

CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
by: Khlopenko, N. J.
Published: (2020)

Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
by: V. S. Urbanovich, et al.
Published: (2018)

A simple low-temperature adiabatic calorimeter for small samples
by: M. I. Bagatskii, et al.
Published: (2011)

A simple low-temperature adiabatic calorimeter for small samples
by: Bagatskii, M.I., et al.
Published: (2011)

Results of experimental studies of a jet-reactive turbine: Effect of pressure on rotation speed
by: Baha, Tetiana, et al.
Published: (2025)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
by: U. Зavdar, et al.
Published: (2014)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
by: Çavdar, U., et al.
Published: (2014)

Numerical modeling of liquid–phase infiltration in the process of sintering ceramic composites
by: V. A. Dutka
Published: (2014)

Physicochemical regularities of a high-voltage electroporcelain formation with a sintering temperature of 1200 °C
by: Bohdanova, K.B.
Published: (2018)

Rational design of gating system for grate kiln and sintering machines
by: A. A. Rudnitskij, et al.
Published: (2014)

TiN crystal structure features in cBN—TiN—Al composite sintered at high pressures and temperatures
by: N. M. Biliavyna, et al.
Published: (2022)

Construction of optimal cluster sample with consideration for design-effect
by: A. Pihida
Published: (2014)

Construction of optimal cluster sample with consideration for design-effect
by: A. Pigida
Published: (2014)

Capacitor and resonator ceramics with low sintering temperature
by: Vovk, E.A., et al.
Published: (2004)

The influence of the rate of increase in gas pressure during vacuum-compression sintering on the structure and properties of VK6M hard alloy
by: M. M. Prokopiv, et al.
Published: (2023)

Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
by: E. M. Lutsak, et al.
Published: (2017)

Production of polycrystalline materials by sintering of nanodispersed diamond nanopowders at high pressure. Review
by: O. O. Bochechka
Published: (2018)

Mechanism of compacting the diamond nanopowder of detonation synthesis at its high pressure sintering
by: O. O. Bochechka
Published: (2017)

Hydrogen influence on the durability of a thin-walled sample under high-temperature creep
by: O. Y. Chepil
Published: (2024)

Determination of material parameters and thickness of industrial magnetodielectric and ferrite samples with a metal substrate
by: V. N. Mizernik, et al.
Published: (2010)

Investigation of the structure formation during sintering pcd in hpht condition
by: V. Z. Turkevych, et al.
Published: (2019)

Phase and structural evolution during mechanical alloying, subsequent annealing and pressure sintering of AlCuNiFeCr high entropy alloy
by: O. I. Yurkova, et al.
Published: (2015)

Studying the design parameters impact of a batch reactor over temperature mode for biomass-to-diesel energy conversion process
by: M. O. Budko
Published: (2016)

Investigation of the influence of high-speed sintering modes on the structure and properties of WC-based carbide composite with high entropy bonding
by: O. A. Yurkova, et al.
Published: (2024)

A method of designing flow parts of the high-pressure shaft fan and blower fans
by: Гриценко, Н. И., et al.
Published: (2016)

A method of designing flow parts of the high-pressure shaft fan and blower fans
by: Гриценко, Н. И., et al.
Published: (2016)

A method of designing flow parts of the high-pressure shaft fan and blower fans
by: N. I. Gritsenko, et al.
Published: (2016)

Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters
by: A. O. Kostikov, et al.
Published: (2023)

Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters
by: Костіков, А. О., et al.
Published: (2024)