A crude of nadhtd materials on the over-confirmed:natural diamond for materials on the basis of cubic nitride boron
Gespeichert in:
| Datum: | 2019 |
|---|---|
| Hauptverfasser: | A. A. Adamovskij, A. D. Kostenko |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2019
|
| Schriftenreihe: | Adhesion of Melts and Brazing of Materials |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0001068511 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
The friction coefficient of natural diamond against materials based on cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2019)
von: A. A. Adamovskij, et al.
Veröffentlicht: (2019)
Tribological characteristics of superhard materials cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)
Reinforcement of material based on the cubic boron nitride by the help of silicon carbide whiskers
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2018)
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2018)
Elastic properties and plasticity of the polycrystals and cutting composite materials on a base of cubic boron nitride
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2019)
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2019)
Synthesis of cubic boron nitride with using of dense modifications of boron nitride polycrystalline grains
von: I. O. Borymskyi
Veröffentlicht: (2017)
von: I. O. Borymskyi
Veröffentlicht: (2017)
On twinning in ultrahard nanocrystalline cubic boron nitride
von: V. L. Solozhenko, et al.
Veröffentlicht: (2020)
von: V. L. Solozhenko, et al.
Veröffentlicht: (2020)
Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)
On the formation of a solid solution having the diamond_like lattice in the wurtzitic boron nitride–cubic diamond system
von: G. S. Olejnik, et al.
Veröffentlicht: (2014)
von: G. S. Olejnik, et al.
Veröffentlicht: (2014)
On the formation of a solid solution having the diamond_like lattice in the wurtzitic boron nitride–cubic diamond system
von: G. S. Olejnik, et al.
Veröffentlicht: (2014)
von: G. S. Olejnik, et al.
Veröffentlicht: (2014)
Preventive action of silicon nitride at HT-HP sintering of cubic boron nitride
von: I. A. Petrusha, et al.
Veröffentlicht: (2015)
von: I. A. Petrusha, et al.
Veröffentlicht: (2015)
The effect of doping on the lattice parameter and properties of cubic boron nitride
von: V. A. Mukhanov, et al.
Veröffentlicht: (2020)
von: V. A. Mukhanov, et al.
Veröffentlicht: (2020)
Superhard composite powders of abrasive purposes based on diamond and cubic boron nitride structured by carbon binder
von: V. G. Poltoratskij
Veröffentlicht: (2017)
von: V. G. Poltoratskij
Veröffentlicht: (2017)
Cubic boron nitride thermobaric sintering in occurrence of unstable nitrides based on chromium and iron
von: I. A. Petrusha, et al.
Veröffentlicht: (2016)
von: I. A. Petrusha, et al.
Veröffentlicht: (2016)
Highly porous cubic boron nitride wheels for dry grinding
von: V. K. Starkov
Veröffentlicht: (2013)
von: V. K. Starkov
Veröffentlicht: (2013)
Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride
von: S. N. Dub, et al.
Veröffentlicht: (2017)
von: S. N. Dub, et al.
Veröffentlicht: (2017)
Structure of gold islet films on thermobaric sintered cubic boron nitride
von: I. P. Fesenko, et al.
Veröffentlicht: (2020)
von: I. P. Fesenko, et al.
Veröffentlicht: (2020)
Structure peculiarities of cubic boron nitride polycrystals manufactured by direct conversion sintering
von: I. A. Petrusha, et al.
Veröffentlicht: (2017)
von: I. A. Petrusha, et al.
Veröffentlicht: (2017)
Influence of synthesis conditions on morphology of cubic boron nitride crystals grown on the seed crystal
von: I. A. Borimskij
Veröffentlicht: (2016)
von: I. A. Borimskij
Veröffentlicht: (2016)
On the interaction of the detonation-synthesized ultradisperse diamond and turbostratic boron nitride
von: G. S. Olejnik, et al.
Veröffentlicht: (2017)
von: G. S. Olejnik, et al.
Veröffentlicht: (2017)
Ensuring fatigue life of parts during finish turning with cubic boron nitride tools
von: K. S. Barandych, et al.
Veröffentlicht: (2018)
von: K. S. Barandych, et al.
Veröffentlicht: (2018)
Rotational scheme of a high-efficient dressing of grinding wheels from cubic boron nitride
von: D. Hessel, et al.
Veröffentlicht: (2015)
von: D. Hessel, et al.
Veröffentlicht: (2015)
Special features of the applications of cutting tools from polycrystalline cubic boron nitride with protective coatings
von: S. A. Klimenko, et al.
Veröffentlicht: (2017)
von: S. A. Klimenko, et al.
Veröffentlicht: (2017)
Comparative analysis of performance of cubic boron nitride and microcrystalline alumina tools in profile grinding of form cutters
von: V. K. Starkov, et al.
Veröffentlicht: (2014)
von: V. K. Starkov, et al.
Veröffentlicht: (2014)
Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)
Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
von: V. K. Starkov, et al.
Veröffentlicht: (2015)
von: V. K. Starkov, et al.
Veröffentlicht: (2015)
The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride
von: M. Ociepa, et al.
Veröffentlicht: (2019)
von: M. Ociepa, et al.
Veröffentlicht: (2019)
Structural transformations during the formation of superhard materials based on the initial powders of wurtzitic boron nitride
von: G. S. Olejnik
Veröffentlicht: (2012)
von: G. S. Olejnik
Veröffentlicht: (2012)
Determination of surface grafene-boron nitride
von: V. A. Petrova, et al.
Veröffentlicht: (2015)
von: V. A. Petrova, et al.
Veröffentlicht: (2015)
Ti-NbN-Al2O3 and Nb-NbN-Al2O3 multilayer vacuum-arc coatings on tools of cubic boron nitride-polycrystalline superhard materials
von: S. A. Klimenko, et al.
Veröffentlicht: (2007)
von: S. A. Klimenko, et al.
Veröffentlicht: (2007)
Influence of boron doping on the photosensitivity of cubic silicon carbide
von: V. N. Rodionov, et al.
Veröffentlicht: (2019)
von: V. N. Rodionov, et al.
Veröffentlicht: (2019)
Synthesis and performance study of polycrystalline cubic boron nitride using WC–B4C–Al2O3 as the binder
von: Peicheng Mo, et al.
Veröffentlicht: (2022)
von: Peicheng Mo, et al.
Veröffentlicht: (2022)
Features of formation micromechanical characteristics of composite pstm system "wurtzite boron nitride – diamond"
von: V. M. Volkogon, et al.
Veröffentlicht: (2016)
von: V. M. Volkogon, et al.
Veröffentlicht: (2016)
On the mechanism of hardening wurtzitic boron nitride under an indenter
von: G. S. Olejnik
Veröffentlicht: (2013)
von: G. S. Olejnik
Veröffentlicht: (2013)
A novel composite abrasive material of unmarketable natural diamond powder
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2014)
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2014)
Investigation of the surface anisotropy of polycrystalline gallium nitride coating using a tunnel microscope equipped with a tip of a boron-doped diamond
von: M. A. Tsysar
Veröffentlicht: (2016)
von: M. A. Tsysar
Veröffentlicht: (2016)
The study of dry grinding of steel cams using cubic boron nirtride tools
von: V. K. Starkov, et al.
Veröffentlicht: (2014)
von: V. K. Starkov, et al.
Veröffentlicht: (2014)
Hydrothermal Conversion of Biomass into Crude for Production of Motor Fuels
von: V. A. Bortyshevskyi, et al.
Veröffentlicht: (2012)
von: V. A. Bortyshevskyi, et al.
Veröffentlicht: (2012)
Influence of the wurtzitic boron nitride initial structural state on the formation of the granular structure of the wBN_based materials. II. Structural transformations in the microstructure formation of the samples of materials based on various types of w
von: V. M. Volkogon, et al.
Veröffentlicht: (2014)
von: V. M. Volkogon, et al.
Veröffentlicht: (2014)
Electrophysical properties of diamond composite material
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2017)
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2017)
On the Observation Data which Confirm Binary Nature of Magnetic Chemically Peculiar Stars
von: Gopka, V. F., et al.
Veröffentlicht: (2012)
von: Gopka, V. F., et al.
Veröffentlicht: (2012)
Ähnliche Einträge
-
The friction coefficient of natural diamond against materials based on cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2019) -
Tribological characteristics of superhard materials cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015) -
Reinforcement of material based on the cubic boron nitride by the help of silicon carbide whiskers
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2018) -
Elastic properties and plasticity of the polycrystals and cutting composite materials on a base of cubic boron nitride
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2019) -
Synthesis of cubic boron nitride with using of dense modifications of boron nitride polycrystalline grains
von: I. O. Borymskyi
Veröffentlicht: (2017)