Buchumschlag

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	H. A. Petasiuk, V. I. Lavrinenko, Yu. V. Syrota
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001089254
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic
von: H. A. Petasiuk, et al.
Veröffentlicht: (2022)

Comparative analysis of characteristics of the form of grain and abrasive ability of natural impact and synthetic diamond powders
von: H. A. Petasiuk, et al.
Veröffentlicht: (2023)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

The elemental composition of growth synthesis systems influence on technological properties, morphometric characteristics, the shape of the projection of grains and the uniformity of grinding powders of synthetic diamond was studied
von: H. A. Petasiuk, et al.
Veröffentlicht: (2017)

Indirect determination of the thickness of the coating of synthetic diamond powders using new 3D models of their grain
von: H. A. Petasiuk
Veröffentlicht: (2021)

Determination of thickness of coated of metalized grinding powders of synthetic diamond based on extrapolation-affine 3D models of grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2018)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool
von: V. V. Smokvyna, et al.
Veröffentlicht: (2023)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Flotation separation as a method of improving the uniformity of synthetic diamond powders according to their morphometric characteristics, grain shape and grain composition
von: G. A. Petasyuk, et al.
Veröffentlicht: (2024)

Study of the effect of matching the actual geometric parameters of the grain and its adopted 3D model on the error of determining the thickness of the coating of diamond powders
von: H. A. Petasiuk
Veröffentlicht: (2023)

The homogeneity of abrasive powders by the shape-similarity of the projection of the grains and the method of its determination
von: H. A. Petasiuk, et al.
Veröffentlicht: (2020)

Modification of synthetic diamond grinding powders and compacts based on cBN micron powders with thermally stable oxides and hlorides using the method of liquid-phase deposition
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2019)

A new group averaging approach to diagnostics of technological properties of high-strength synthetic diamond powders
von: H. A. Petasiuk
Veröffentlicht: (2022)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2022)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
von: V. P. Afanasev, et al.
Veröffentlicht: (2016)

Picnometric-additive method for determining the degree of coating of grinding powders superhard matirials with the use of an extrapolation-affine 3D grain model
von: H. A. Petasiuk, et al.
Veröffentlicht: (2020)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2021)

A study of the tendency and extent of variation of morphometric characteristics of standard synthetic diamond grits in a continuous series of their grades and sizes
von: H. A. Petasiuk, et al.
Veröffentlicht: (2018)

Impact Consolidation of the Tungsten Powder in the Wide Range of Temperatures. I. Density and Structure
von: A. I. Tolochin, et al.
Veröffentlicht: (2014)

Impact Consolidation of the Tungsten Powder in the Wide Range of Temperatures. II. Mechanical Properties
von: A. I. Tolochin, et al.
Veröffentlicht: (2014)

A system-analogue method of identification of geometric shape of the abrasive grain projection
von: H. A. Petasiuk
Veröffentlicht: (2016)

Expansion of the applied capabilities of the search-analog method for identifying the shape of the projection of abrasive powders grains
von: H. A. Petasiuk, et al.
Veröffentlicht: (2021)

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
von: T. O. Prikhna, et al.
Veröffentlicht: (2022)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

Influence of physicomechanical and physicochemical characteristics of synthetic diamonds AC20 100/80 after separation in magnetic and electric fields on wear-resistance of the grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2018)

Physico-mechanical and operational characteristics of synthetic diamond powders, synthesized with the use of Ni–Mn and Fe–Si carbon solvents
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2019)

Development of diamond grinding ribbons on rubber bond
von: V. M. Bychykhin, et al.
Veröffentlicht: (2018)

Grinding of gear wheels by diamond-abrasive wheels
von: S. V. Rjabchenko
Veröffentlicht: (2017)

Analytical determination of the number of grains in a carat of diamond powder using an extrapolation–affine 3D model of a grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2012)

Specifying the process parameters for diamond dressing of grinding wheels
von: Ya. O. Shakhbazov, et al.
Veröffentlicht: (2019)

Diamond grinding of ceramic balls with a circular feed
von: S. V. Sokhan, et al.
Veröffentlicht: (2024)

Diamond grinding of ceramic balls with a circular feed
von: S. V. Sokhan, et al.
Veröffentlicht: (2023)

Dielectric properties of synthetic diamond polycrystals
von: L. O. Romanko, et al.
Veröffentlicht: (2024)

Estimation of the quality of coatings of metalized grinders of synthetic diamond
von: E. A. Pashchenko, et al.
Veröffentlicht: (2017)

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools
von: V. G. Poltoratskij
Veröffentlicht: (2019)

Quantum effects in cryocrystals in a wide temperature range
von: A. Leonteva, et al.
Veröffentlicht: (2019)

Quantum effects in cryocrystals in a wide temperature range
von: Leont’eva, A., et al.
Veröffentlicht: (2019)