Investigation of the structure formation during sintering pcd in hpht condition
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | V. Z. Turkevych, L. P. Stasiuk, D. A. Stratiichuk, V. M. Tkach, A. P. Zakora, Yu. O. Melniichuk, N. M. Biliavina |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2019
|
| Назва видання: | Tooling materials science |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001089263 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Investigation of the formation during sintering diamond-carbide plates with activation additions
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2017)
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2017)
Formation of the electrophysical properties of the polycrystals during hpht sintering of conductive diamond powders
за авторством: O. O. Bochechka, та інші
Опубліковано: (2016)
за авторством: O. O. Bochechka, та інші
Опубліковано: (2016)
Structural transformations in boron carbooxynitride (BNCO) during HPHT synthesis and sintering
за авторством: H. S. Olieinyk, та інші
Опубліковано: (2022)
за авторством: H. S. Olieinyk, та інші
Опубліковано: (2022)
Formation of superhard com posites of the BL group in the cBN—Ti —WC—(Al) system under the HPHT-conditions
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020)
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020)
Helical milling of small holes in fully-sintered zirconia ceramic with PCD tools
за авторством: J. He, та інші
Опубліковано: (2024)
за авторством: J. He, та інші
Опубліковано: (2024)
Study on PCD tool wear in hard milling of fully-sintered 3Y-TZP ceramics
за авторством: J. Xu, та інші
Опубліковано: (2022)
за авторством: J. Xu, та інші
Опубліковано: (2022)
Solid phase interaction of TiC with ZrC or ZrN under mechanochemical synthesis and HPHT powder
за авторством: N. M. Biliavyna, та інші
Опубліковано: (2022)
за авторством: N. M. Biliavyna, та інші
Опубліковано: (2022)
Thermal resistance of PCD materials with borides bonding phase
за авторством: L. Jaworska, та інші
Опубліковано: (2015)
за авторством: L. Jaworska, та інші
Опубліковано: (2015)
Predictors of cognitive distortions in managerial decision-making: PCD18 methodology
за авторством: M. Frankovsky, та інші
Опубліковано: (2016)
за авторством: M. Frankovsky, та інші
Опубліковано: (2016)
Thermobaric sintering of cBN-Cr3C2 composite
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2017)
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2017)
Anisotropic charge transport in HPHT diamonds
за авторством: V. I. Grushko, та інші
Опубліковано: (2024)
за авторством: V. I. Grushko, та інші
Опубліковано: (2024)
Structure and hardness of octahedral natural diamond single crystals depending on the HPHT treatment conditions
за авторством: A. N. Sokolov, та інші
Опубліковано: (2012)
за авторством: A. N. Sokolov, та інші
Опубліковано: (2012)
Optimization of designing on cutter parameters of PCD saw blades by simulation analysis
за авторством: X. Yang, та інші
Опубліковано: (2019)
за авторством: X. Yang, та інші
Опубліковано: (2019)
Investigation of the structure of diamond-carbide plates obtained by different methods
за авторством: L. P. Stasiuk, та інші
Опубліковано: (2016)
за авторством: L. P. Stasiuk, та інші
Опубліковано: (2016)
Sintering of superhard instrumen talpurpose composites of the BL group in the cBN—NbC—Al system under high pressure and high temperature conditions
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020)
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020)
Wear resistance of diamond-dolomite and diamond-strontium carbonate composites produced under HPHT-conditions
за авторством: N. A. Bondarenko, та інші
Опубліковано: (2018)
за авторством: N. A. Bondarenko, та інші
Опубліковано: (2018)
Sintering of superhard cBN-based materials with Ti4WC5
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020)
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020)
HP-HT sintering of cBN based materials with ZrC and Al
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2020)
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2020)
Using digital microphotogrammetry for HPHT-diamond single crystals morphology analysis
за авторством: P. M. Lytvyn, та інші
Опубліковано: (2021)
за авторством: P. M. Lytvyn, та інші
Опубліковано: (2021)
Sintering of cBN based materials with TaC binder for cutting tool application
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2020)
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2020)
Structure peculiarities of cubic boron nitride polycrystals manufactured by direct conversion sintering
за авторством: I. A. Petrusha, та інші
Опубліковано: (2017)
за авторством: I. A. Petrusha, та інші
Опубліковано: (2017)
Investigation of acoustic emission signal on the stage of penetretion and exit when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
за авторством: L. M. Devin, та інші
Опубліковано: (2022)
за авторством: L. M. Devin, та інші
Опубліковано: (2022)
Synthesis and sintering of superhard materials: thermodynamics and kinetics (transcript of scientific report at the meeting of the Presidium of NAS of Ukraine, November 8, 2017)
за авторством: V. Z. Turkevych
Опубліковано: (2018)
за авторством: V. Z. Turkevych
Опубліковано: (2018)
Specific electrical conductivity of graphite composite heaters for HPHT diamond growing
за авторством: O. V. Savitskyi, та інші
Опубліковано: (2017)
за авторством: O. V. Savitskyi, та інші
Опубліковано: (2017)
Preferential etching by flowing oxygen on the (100) surfaces of HPHT single-crystal diamond
за авторством: L. M. Yang, та інші
Опубліковано: (2017)
за авторством: L. M. Yang, та інші
Опубліковано: (2017)
Structural changes of vanadium nitride under the conditions of thermobaric sintering in the cBN-VN-Al ceramic composite
за авторством: N. M. Belyavina, та інші
Опубліковано: (2024)
за авторством: N. M. Belyavina, та інші
Опубліковано: (2024)
Semiconductor HPHT-diamonds as active elements of electronic devices: their structural and electronic properties
за авторством: T. V. Kovalenko, та інші
Опубліковано: (2021)
за авторством: T. V. Kovalenko, та інші
Опубліковано: (2021)
TiN crystal structure features in cBN—TiN—Al composite sintered at high pressures and temperatures
за авторством: N. M. Biliavyna, та інші
Опубліковано: (2022)
за авторством: N. M. Biliavyna, та інші
Опубліковано: (2022)
Cubic boron nitride thermobaric sintering in occurrence of unstable nitrides based on chromium and iron
за авторством: I. A. Petrusha, та інші
Опубліковано: (2016)
за авторством: I. A. Petrusha, та інші
Опубліковано: (2016)
Features of formation of nanodisperse granular structure during RT-sintering of hexagonal diamond (lonsdaleite) powder
за авторством: H. S. Olieinyk, та інші
Опубліковано: (2020)
за авторством: H. S. Olieinyk, та інші
Опубліковано: (2020)
Formation of multicomponent solid solutions in cBN—TiC— VN —Al system at high pressure composite sintering
за авторством: N. M. Belyavina, та інші
Опубліковано: (2024)
за авторством: N. M. Belyavina, та інші
Опубліковано: (2024)
Influence of modification of the diamond nanoparticles surface by W-C bond on sintering and properties of nanocomposite diamond-tungsten carbide
за авторством: O. O. Bochechka, та інші
Опубліковано: (2018)
за авторством: O. O. Bochechka, та інші
Опубліковано: (2018)
Axial force when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
за авторством: L. M. Devin, та інші
Опубліковано: (2020)
за авторством: L. M. Devin, та інші
Опубліковано: (2020)
Method for assessing the performance of PDC for a drilling explorationtools
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2018)
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2018)
Phase formation and diamond retention in Cdiamond‒(WC‒Co)‒ZrO2 composites sintered by the spark-plasma sintering method
за авторством: B. T. Ratov, та інші
Опубліковано: (2024)
за авторством: B. T. Ratov, та інші
Опубліковано: (2024)
Investigation of microwave sintering process of biogenic hydroxyapatite at 900 °C
за авторством: A. B. Tovstonoh, та інші
Опубліковано: (2013)
за авторством: A. B. Tovstonoh, та інші
Опубліковано: (2013)
On the achievements of the Bakul Institute for Superhard Materials in the field of synthesis and sintering of superhard materials for the period of the activity in the composition of the National Academy of Science of Ukraine
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2018)
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2018)
Diamond HPHT-crystallization on seed using carbon solvents formed by powder metallurgy methods
за авторством: T. V. Kovalenko, та інші
Опубліковано: (2022)
за авторством: T. V. Kovalenko, та інші
Опубліковано: (2022)
Specific features of structure formation during sintering of carbide-steel with binder based on sludge of roller-bearing steel
за авторством: G. A. Bagljuk, та інші
Опубліковано: (2014)
за авторством: G. A. Bagljuk, та інші
Опубліковано: (2014)
Obtaining superhard composites in the system Cdiam—SiB4—WC under conditions of high pressures and temperatures
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2019)
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2019)
Схожі ресурси
-
Investigation of the formation during sintering diamond-carbide plates with activation additions
за авторством: V. Z. Turkevych, та інші
Опубліковано: (2017) -
Formation of the electrophysical properties of the polycrystals during hpht sintering of conductive diamond powders
за авторством: O. O. Bochechka, та інші
Опубліковано: (2016) -
Structural transformations in boron carbooxynitride (BNCO) during HPHT synthesis and sintering
за авторством: H. S. Olieinyk, та інші
Опубліковано: (2022) -
Formation of superhard com posites of the BL group in the cBN—Ti —WC—(Al) system under the HPHT-conditions
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2020) -
Helical milling of small holes in fully-sintered zirconia ceramic with PCD tools
за авторством: J. He, та інші
Опубліковано: (2024)