Buchumschlag

Modification of synthetic diamond grinding powders and compacts based on cBN micron powders with thermally stable oxides and hlorides using the method of liquid-phase deposition

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	V. G. Poltoratskij, A. A. Bochechka, V. I. Lavrinenko, V. N. Tkach, G. A. Petasjuk, V. A. Bilochenko, O. V. Leshchenko, G. S. Grishchenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2019
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001089268
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools
von: V. G. Poltoratskij
Veröffentlicht: (2019)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Composites based on cBN micron powders structured by carbon binder for the application as functional elements in the working layer of diamond–abrasive tools. Part 1. Composite grits as abrasive elements
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2014)

Determination of thickness of coated of metalized grinding powders of synthetic diamond based on extrapolation-affine 3D models of grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2018)

The elemental composition of growth synthesis systems influence on technological properties, morphometric characteristics, the shape of the projection of grains and the uniformity of grinding powders of synthetic diamond was studied
von: H. A. Petasiuk, et al.
Veröffentlicht: (2017)

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks
von: H. A. Petasiuk, et al.
Veröffentlicht: (2019)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

Preparation and properties grinding powders and micro powders made of impact diamond- lonsdaleite abrasives
von: V. P. Afanasev, et al.
Veröffentlicht: (2016)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Attenuation of microwave radiation at 34.09–34.19 GHz in a composite material based on diamond micron powder structured by a nanocarbon binder vapor-deposited at subatmospheric pressure
von: V. I. Chasnyk, et al.
Veröffentlicht: (2017)

Picnometric-additive method for determining the degree of coating of grinding powders superhard matirials with the use of an extrapolation-affine 3D grain model
von: H. A. Petasiuk, et al.
Veröffentlicht: (2020)

Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic
von: H. A. Petasiuk, et al.
Veröffentlicht: (2022)

A novel composite abrasive material of unmarketable natural diamond powder
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2014)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2024)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2022)

Electrodeposited diamond coating with protection by diamond micron powder in a dressing tool. Part 2. Tool performance
von: M. N. Shejko, et al.
Veröffentlicht: (2017)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2021)

Diamond electroplated coating with protection by diamond micron powder in a dressing tool. Part 1. Coating deposition conditions
von: M. N. Shejko, et al.
Veröffentlicht: (2017)

Superhard composite powders of abrasive purposes based on diamond and cubic boron nitride structured by carbon binder
von: V. G. Poltoratskij
Veröffentlicht: (2017)

Study of the Process of Gas Emission from Ni Nanocrystalline Powders Fabricated by Ball Grinding in Ultrasonic Mill
von: A. E. Perekos, et al.
Veröffentlicht: (2011)

Physico-mechanical and operational characteristics of synthetic diamond powders, synthesized with the use of Ni–Mn and Fe–Si carbon solvents
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2019)

Abrasive ability of staurolite mineral concentrate*. use of stavrolit in abrasive pastes and in grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2019)

Comparative analysis of characteristics of the form of grain and abrasive ability of natural impact and synthetic diamond powders
von: H. A. Petasiuk, et al.
Veröffentlicht: (2023)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
von: Романенко, Я.М., et al.
Veröffentlicht: (2015)

Impact of magnetic field on phase–structure state and magnetic properties of high-dispersed Fe powders pro-duced by electric-spark grinding
von: A. G. Dubovoj, et al.
Veröffentlicht: (2013)

Investigation of changes in physico-mechanical and physical-chemical properties of diamond diamond systems of the Ni-Mn-C system for increasing the operating characteristics of the grinding tool
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2017)

Flotation separation as a method of improving the uniformity of synthetic diamond powders according to their morphometric characteristics, grain shape and grain composition
von: G. A. Petasyuk, et al.
Veröffentlicht: (2024)

Analytical determination of the number of grains in a carat of diamond powder using an extrapolation–affine 3D model of a grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2012)

Influence of the wurtzitic boron nitride initial structural state on the formation of the granular structure of the wBN based materials. I. Structural characteristics of particles of the initial wBN powders
von: G. S. Olejnik, et al.
Veröffentlicht: (2013)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
von: Ya. M. Romanenko, et al.
Veröffentlicht: (2017)

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
von: T. O. Prikhna, et al.
Veröffentlicht: (2022)

Thermobaric sintering of cBN-Cr3C2 composite
von: K. V. Slipchenko, et al.
Veröffentlicht: (2017)

A new group averaging approach to diagnostics of technological properties of high-strength synthetic diamond powders
von: H. A. Petasiuk
Veröffentlicht: (2022)

Indirect determination of the thickness of the coating of synthetic diamond powders using new 3D models of their grain
von: H. A. Petasiuk
Veröffentlicht: (2021)

cBN–Cu composite: production method and physical properties
von: M. V. Nikishina
Veröffentlicht: (2012)

Термобаричне спікання композиту cBN–Cr₃C₂
von: Сліпченко, К.В., et al.
Veröffentlicht: (2017)

The structure and properties of the composite W—50% (vol. ) Cu, prepared using a tungsten powder, activated by grinding in a ball mill
von: L. A. Krjachko, et al.
Veröffentlicht: (2014)