The influence of composition and structure of binder phase on hard alloys service properties
Збережено в:
| Дата: | 2019 |
|---|---|
| Автор: | V. S. Panov |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2019
|
| Назва видання: | Tooling materials science |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001089272 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
за авторством: A. M. Stepanchuk, та інші
Опубліковано: (2018)
за авторством: A. M. Stepanchuk, та інші
Опубліковано: (2018)
Structure and properties of Fe—P—B hard alloys and composites on their base
за авторством: E. V. Sukhovaja, та інші
Опубліковано: (2015)
за авторством: E. V. Sukhovaja, та інші
Опубліковано: (2015)
cBN based materials with TiN-Al binder phase: sintering, structure, properties
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2019)
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2019)
The influence of VC and TaS alloying microadditives on the structure and physico-mechanical properties of VK10 hard alloys
за авторством: V. P. Botvynko
Опубліковано: (2018)
за авторством: V. P. Botvynko
Опубліковано: (2018)
Influence of high pressure and temperature on the structure and properties of the WC–6 Co hard alloy
за авторством: I. V. Andreiev, та інші
Опубліковано: (2018)
за авторством: I. V. Andreiev, та інші
Опубліковано: (2018)
Analysis of the influence of high pressures and temperatures on the formation of the structure and properties of hard alloys such as WC–Co
за авторством: I. O. Hnatenko, та інші
Опубліковано: (2021)
за авторством: I. O. Hnatenko, та інші
Опубліковано: (2021)
Low energy compositions based on inorganic binders
за авторством: V. V. Hlukhovskyi, та інші
Опубліковано: (2019)
за авторством: V. V. Hlukhovskyi, та інші
Опубліковано: (2019)
Formation of structure, phase composition and faulty substructure in the bulk- and differentially-hard-tempered rails
за авторством: V. E. Gromov, та інші
Опубліковано: (2014)
за авторством: V. E. Gromov, та інші
Опубліковано: (2014)
Surface properties of composite compacts based on diamond of AC 6 grade with carbon binder
за авторством: V. H. Poltoratskyi, та інші
Опубліковано: (2017)
за авторством: V. H. Poltoratskyi, та інші
Опубліковано: (2017)
Influence of geopolymer binder components on properties of compounds during cementation of boron-containing
за авторством: Yu. H. Fedorenko, та інші
Опубліковано: (2021)
за авторством: Yu. H. Fedorenko, та інші
Опубліковано: (2021)
Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder: structure, properties, application
за авторством: T. Kolabylina, та інші
Опубліковано: (2017)
за авторством: T. Kolabylina, та інші
Опубліковано: (2017)
Effect of structure of joint zone of diamond layer with hard-alloy substrate of brazed cutters on their service life
за авторством: B. V. Stefaniv, та інші
Опубліковано: (2018)
за авторством: B. V. Stefaniv, та інші
Опубліковано: (2018)
Modification of epoxy binder polymer composite by multilayer carbon nanotubes
за авторством: D. V. Onishchenko, та інші
Опубліковано: (2014)
за авторством: D. V. Onishchenko, та інші
Опубліковано: (2014)
Influence of quantity binder of TN65 on holding of SiC particles in the composite during its grinding
за авторством: V. P. Bondarenko, та інші
Опубліковано: (2016)
за авторством: V. P. Bondarenko, та інші
Опубліковано: (2016)
Structure influence on the hardness of bimetallic castings
за авторством: E. G. Aftandiljants, та інші
Опубліковано: (2017)
за авторством: E. G. Aftandiljants, та інші
Опубліковано: (2017)
Metal binder based on nickel for an intensive electrosintering of diamond_containing composites
за авторством: R. S. Shmehera, та інші
Опубліковано: (2014)
за авторством: R. S. Shmehera, та інші
Опубліковано: (2014)
Metal binder based on nickel for an intensive electrosintering of diamond_containing composites
за авторством: R. S. Shmehera, та інші
Опубліковано: (2014)
за авторством: R. S. Shmehera, та інші
Опубліковано: (2014)
The effect of structural state and temperature on mechanical properties and deformation mechanisms of WC–Co hard alloy
за авторством: Ju. V. Milman
Опубліковано: (2014)
за авторством: Ju. V. Milman
Опубліковано: (2014)
Superhard composite powders of abrasive purposes based on diamond and cubic boron nitride structured by carbon binder
за авторством: V. G. Poltoratskij
Опубліковано: (2017)
за авторством: V. G. Poltoratskij
Опубліковано: (2017)
Influence of atomic-crystalline characteristics on the processes of synthesis of phosphate binders
за авторством: D. V. Keush, та інші
Опубліковано: (2015)
за авторством: D. V. Keush, та інші
Опубліковано: (2015)
Determining shock hardness and micro hardness of nonferrous metals and their alloys
за авторством: O. O. Kotrechko
Опубліковано: (2016)
за авторством: O. O. Kotrechko
Опубліковано: (2016)
Influence of titanoalumochromination on the composition, structure, properties of KhN55VMTKYu alloy
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2018)
за авторством: V. H. Khyzhniak, та інші
Опубліковано: (2018)
The influence of alloying of hard WC–Ni alloys with chromium and vanadium carbides on their corrosion and trybocorrosion characteristics
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2020)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2020)
The influence of electrolyte composition for hard anodizing of aluminium on oxide layer characteristics
за авторством: M. M. Student, та інші
Опубліковано: (2021)
за авторством: M. M. Student, та інші
Опубліковано: (2021)
Quantitative Methods for the Study of Al—Li Alloys: Phase Composition, Anisotropy of Properties, and Phase Stability
за авторством: S. Betsofen, та інші
Опубліковано: (2015)
за авторством: S. Betsofen, та інші
Опубліковано: (2015)
Properties of a composite multilayered hard coating Zr–ZrN
за авторством: V. F. Gorban, та інші
Опубліковано: (2017)
за авторством: V. F. Gorban, та інші
Опубліковано: (2017)
Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
за авторством: B. V. Stefaniv
Опубліковано: (2013)
за авторством: B. V. Stefaniv
Опубліковано: (2013)
The influence of chemical composition on structure and mechanical and corrosion properties of cast Al–Mg–Ss alloys
за авторством: O. P. Ostash, та інші
Опубліковано: (2020)
за авторством: O. P. Ostash, та інші
Опубліковано: (2020)
Phase composition, microstructure and wear properties of Ni/Ni3Si composites prepared by mechanical alloying
за авторством: Junxi Zhang, та інші
Опубліковано: (2021)
за авторством: Junxi Zhang, та інші
Опубліковано: (2021)
Effect of preliminary application of alloying powders on change of structure and hardness of deposited metal
за авторством: V. V. Peremitko, та інші
Опубліковано: (2019)
за авторством: V. V. Peremitko, та інші
Опубліковано: (2019)
Using composite diamond-containing materials structured with carbon binder and ceramic materials based on AlN in microwave radiation absorbers
за авторством: O. V. Leshchenko, та інші
Опубліковано: (2019)
за авторством: O. V. Leshchenko, та інші
Опубліковано: (2019)
Phase Composition of Electrodeposited Fe—Zn Alloys
за авторством: Ie. V. Kolesnyk
Опубліковано: (2015)
за авторством: Ie. V. Kolesnyk
Опубліковано: (2015)
Effect of the contact conductivity of the diamond–metal binder interface on the thermal conductivity of diamond-containing composites
за авторством: R. S. Shmehera, та інші
Опубліковано: (2015)
за авторством: R. S. Shmehera, та інші
Опубліковано: (2015)
A new phenomenon in the structure formation of T5K10 hard alloy
за авторством: M. M. Prokopiv
Опубліковано: (2018)
за авторством: M. M. Prokopiv
Опубліковано: (2018)
Influence of surfacing modes using powder strips on chemical composition and hardness of deposited metal
за авторством: A. P. Voronchuk, та інші
Опубліковано: (2018)
за авторством: A. P. Voronchuk, та інші
Опубліковано: (2018)
Influence of heat treatment on the structure and properties of welded joints of high-strength titanium alloys based on β-phase
за авторством: S. V. Akhonin, та інші
Опубліковано: (2021)
за авторством: S. V. Akhonin, та інші
Опубліковано: (2021)
Reinforcing phases, structure and properties of modified welds of low-alloyed steels
за авторством: V. V. Golovko, та інші
Опубліковано: (2016)
за авторством: V. V. Golovko, та інші
Опубліковано: (2016)
Influence of V on the Structure and Phase Composition of Eutectic Ti0,475Zr0,3Mn0,225 Alloy
за авторством: V. G. Ivanchenko, та інші
Опубліковано: (2014)
за авторством: V. G. Ivanchenko, та інші
Опубліковано: (2014)
Investigation of Phase Transformations and Phase Composition of Fe—B-System Alloys
за авторством: Yu. Filonenko, та інші
Опубліковано: (2013)
за авторством: Yu. Filonenko, та інші
Опубліковано: (2013)
The effect of high-intensity electron beam on the crystal structure, phase composition, and properties of Al–Si alloys with different silicon content
за авторством: D. V. Zaguliaev, та інші
Опубліковано: (2021)
за авторством: D. V. Zaguliaev, та інші
Опубліковано: (2021)
Схожі ресурси
-
Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
за авторством: A. M. Stepanchuk, та інші
Опубліковано: (2018) -
Structure and properties of Fe—P—B hard alloys and composites on their base
за авторством: E. V. Sukhovaja, та інші
Опубліковано: (2015) -
cBN based materials with TiN-Al binder phase: sintering, structure, properties
за авторством: K. V. Slipchenko, та інші
Опубліковано: (2019) -
The influence of VC and TaS alloying microadditives on the structure and physico-mechanical properties of VK10 hard alloys
за авторством: V. P. Botvynko
Опубліковано: (2018) -
Influence of high pressure and temperature on the structure and properties of the WC–6 Co hard alloy
за авторством: I. V. Andreiev, та інші
Опубліковано: (2018)