Resource-saving issues when recovering diamond particles from rock sludge, which was formed during the operation of the diamond drilling and stone-working tool

Resource-saving issues when recovering diamond particles from rock sludge, which was formed during the operation of the diamond drilling and stone-working tool

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	N. A. Olejnik, G. D. Ilnitskaja, E. P. Vinogradova, A. P. Zakora, G. A. Bazalij, A. L. Majstrenko, V. N. Tkach, G. A. Petasjuk
Format:	Artikel
Sprache:	English
Veröffentlicht:	2019
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001089278
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of the uniformity of synthetic diamond grits on the drilling tool performance
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

Influence of diamond defects on workability drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2017)

Character of wear of synthetic diamonds differentstrength in impregnated drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2018)

Evaluation of efficiency of destruction of solid rocks by drilling crowns, equipped with synthetic diamonds and insertions DPCM+
von: A. P. Zakora, et al.
Veröffentlicht: (2018)

Effect of shock wave processing of nanopowders of synthetic diamond on their size characteristics
von: N. A. Olejnik, et al.
Veröffentlicht: (2017)

Comparative estimation of the performance of drilling bits with diamond-containing matrix and inserts from diamond-containing composites
von: O. P. Vynohradova, et al.
Veröffentlicht: (2022)

Size separation of diamond nanopowders synthesized by detonation
von: G. P. Bogatyrjova, et al.
Veröffentlicht: (2012)

On the structure formation of diamond-containing composites used in drilling and stone-working rools (A review)
von: V. N. Kolodnitskij, et al.
Veröffentlicht: (2017)

Properties of diamond polycrystalline composite material obtained in the diamond-graphene-silicon system
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2017)

Effect of volume defects and surface defects on the separation of synthetic diamonds in magnetic and electric fields
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2016)

Physical and chemical properties of synthetic diamonds, which are plated composite coating
von: E. A. Pashchenko, et al.
Veröffentlicht: (2016)

Energy criteria for the efficiency of diamond drilling with a flash wash
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2017)

Axial force when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Novel wear-resistant superhard diamond composite polycrystalline material
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2018)

Improving efficiency of finishing natural stone using diamond–polymer fiber tools
von: V. D. Kurilovych, et al.
Veröffentlicht: (2014)

Influence of durability of synthetic diamonds on efficiency of destruction of mountain rock drill bits
von: A. M. Isonkin
Veröffentlicht: (2016)

Global precious stones market and modern tendencies of diamonds market development
von: O. Ksenzhuk
Veröffentlicht: (2017)

Efficiency of the use of diamond drilling bits with a different intensity of the destruction of the mountain rocks
von: A. M. Isonkin
Veröffentlicht: (2017)

Evaluation of diamond-coated tools in drilling high-strength CFRP composites
von: J. Xu, et al.
Veröffentlicht: (2022)

Chinese scientific drilling №1 well diamonds coring bit technology
von: Zhang Xiaoxi, et al.
Veröffentlicht: (2010)

A novel composite abrasive material of unmarketable natural diamond powder
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2014)

Energy-saving processing of galvanic sludge by the feritization method
von: B. Yemchura, et al.
Veröffentlicht: (2020)

Estimation of the quality of coatings of metalized grinders of synthetic diamond
von: E. A. Pashchenko, et al.
Veröffentlicht: (2017)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Investigation of acoustic emission signal on the stage of penetretion and exit when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2022)

Investigation of changes in physico-mechanical and physical-chemical properties of diamond diamond systems of the Ni-Mn-C system for increasing the operating characteristics of the grinding tool
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2017)

Implementation of the rock thermal cyclic weakening in the diamond drill bits with an elastic console
von: V. F. Gankevich, et al.
Veröffentlicht: (2018)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Ontology and thesaurus description of subsystem of the "superhard materials" "elite powders from synthetic diamonds" obtained by the method of static synthesis for the drilling and stone machining tools
von: K. Z. Gordashnik, et al.
Veröffentlicht: (2017)

Mechanical processing of diamond monocrystals by diamond microprouts with coating
von: A. V. Nozhkina, et al.
Veröffentlicht: (2018)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

On the formation of a solid solution having the diamond_like lattice in the wurtzitic boron nitride–cubic diamond system
von: G. S. Olejnik, et al.
Veröffentlicht: (2014)

On the formation of a solid solution having the diamond_like lattice in the wurtzitic boron nitride–cubic diamond system
von: G. S. Olejnik, et al.
Veröffentlicht: (2014)

Energy-saving processing of galvanic sludge by the feritization method
von: Yemchura, Bogdan, et al.
Veröffentlicht: (2020)

Structure and electrophysical properties of the diamond–graphen–silicon carbide composite
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2018)

Research of technological parameters of blasthole drilling with cutter drilling bits which have pins of different regidity
von: V. G. Synkov, et al.
Veröffentlicht: (2016)

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels
von: V. I. Lavrinenko
Veröffentlicht: (2020)

Analysis of the interactions in the Cu–Ti–Diamond and Co–W–diamond systems in wetting diamond polycrystals and infiltration of UDD diamond nanopowder at high pressure and temperature
von: E. M. Lutsak, et al.
Veröffentlicht: (2014)

Influence of productivity diamond abrasive treatment on the surface morphology wear diamond crystals
von: A. M. Kuzej, et al.
Veröffentlicht: (2016)

Development of single walled diamond bits with shorter sectors
von: A. A. Karakozov, et al.
Veröffentlicht: (2016)