Scientific and technological fundamentals of the production of highly efficient types of construction steel and wire rod
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | E. V. Parusov, H. V. Levchenko, V. A. Lutsenko, S. V. Bobyr, O. V. Parusov, I. M. Chuiko, T. M. Holubenko |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2019
|
| Назва видання: | Metal and casting of Ukraine |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001092896 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Effect of heat treatment, microalloying with boron and ageing treatment on the work of fracture of wire rod under tension
за авторством: V. V. Parusov, та інші
Опубліковано: (2013)
за авторством: V. V. Parusov, та інші
Опубліковано: (2013)
The interrelation of the chemical composition and mechanical properties of constructional alloyed steels
за авторством: V. A. Lutsenko, та інші
Опубліковано: (2018)
за авторством: V. A. Lutsenko, та інші
Опубліковано: (2018)
On the possibility of forecasting mechanical properties of cold-deformed metal products from pearlite grade steel
за авторством: E. V. Parusov, та інші
Опубліковано: (2021)
за авторством: E. V. Parusov, та інші
Опубліковано: (2021)
Regularities of the retained austenite formation in the complexly alloyed steel (overview)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2021)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2021)
Study of the influence of cryogene processing on the characteristics of structure formation and fatigue resistance of 38KHN3MFA steel after preliminary thermal hardening
за авторством: S. V. Bobyr, та інші
Опубліковано: (2022)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2022)
Comparative analysis of the kinetics of martensitic transformation in low-alloy structural steel by dilatometric and calculation methods
за авторством: I. M. Chuiko, та інші
Опубліковано: (2024)
за авторством: I. M. Chuiko, та інші
Опубліковано: (2024)
Selection of the optimum composition for low-carbon wire rod
за авторством: A. S. Kozachjok, та інші
Опубліковано: (2012)
за авторством: A. S. Kozachjok, та інші
Опубліковано: (2012)
Shear transformation of austenite in steels considering stresses' effects
за авторством: S. V. Bobyr, та інші
Опубліковано: (2022)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2022)
Influence of thermal strengthening technology on variability of mechanical properties of rolled metal product
за авторством: E. V. Parusov, та інші
Опубліковано: (2020)
за авторством: E. V. Parusov, та інші
Опубліковано: (2020)
Influence of a kind treatment on the austenite grain high carbon steel
за авторством: E. V. Parusov, та інші
Опубліковано: (2014)
за авторством: E. V. Parusov, та інші
Опубліковано: (2014)
Development stages for small section and rod mills and casting-rolling aggregate for small section and wire rod production
за авторством: Ju. V. Konovalov, та інші
Опубліковано: (2015)
за авторством: Ju. V. Konovalov, та інші
Опубліковано: (2015)
Analysis of the efficiency of blanket cutting methods in the production of small rolled rods in rods
за авторством: Yu. Kuzmenko, та інші
Опубліковано: (2022)
за авторством: Yu. Kuzmenko, та інші
Опубліковано: (2022)
Modern requirements for quality of wire rod wide Grades
за авторством: I. N. Chujko
Опубліковано: (2015)
за авторством: I. N. Chujko
Опубліковано: (2015)
Development of the theory of pearlite transformation in steel
за авторством: V. V. Parusov, та інші
Опубліковано: (2013)
за авторством: V. V. Parusov, та інші
Опубліковано: (2013)
Specifics of the effect of non-metallic inclusions on mechanical properties and low-cyclic durability of steel ropes during operation in aggressive environment
за авторством: S. I. Gubenko, та інші
Опубліковано: (2018)
за авторством: S. I. Gubenko, та інші
Опубліковано: (2018)
Manufacture of wire rods with extended dimensions and grades in the view of rational parameters of sizing and desired rolling accuracy
за авторством: A. A. Gorbanev, та інші
Опубліковано: (2017)
за авторством: A. A. Gorbanev, та інші
Опубліковано: (2017)
Features of wear of friction couples of rope-block and rope-drum under the working conditions of lifting and traction devices
за авторством: E. V. Parusov, та інші
Опубліковано: (2022)
за авторством: E. V. Parusov, та інші
Опубліковано: (2022)
Development of flux-cored wire for arc welding of high-strength steels of bainite class
за авторством: V. N. Shlepakov, та інші
Опубліковано: (2011)
за авторством: V. N. Shlepakov, та інші
Опубліковано: (2011)
Multiple-wire submerged arc welding of high-strength fine-grained steels
за авторством: S. Gook, та інші
Опубліковано: (2022)
за авторством: S. Gook, та інші
Опубліковано: (2022)
Problems of rolling schedule choosing with switching of light section and wire rod mills to continuously cast blank
за авторством: S. A. Vorobej, та інші
Опубліковано: (2012)
за авторством: S. A. Vorobej, та інші
Опубліковано: (2012)
Parametric Optimization of Metallic Rod Constructions with using the Modified Method of Gradient Projection
за авторством: I. D. Peleshko, та інші
Опубліковано: (2021)
за авторством: I. D. Peleshko, та інші
Опубліковано: (2021)
Development of flux-cored wire of ferrite grade for hardfacing of parts of high-carbon steels
за авторством: Ja. P. Chernjak
Опубліковано: (2013)
за авторством: Ja. P. Chernjak
Опубліковано: (2013)
Effect of Separated and Incomplete Electrodes on Vibrations of Piezoceramic Rod-Type Transducer
за авторством: V. L. Karlash
Опубліковано: (2016)
за авторством: V. L. Karlash
Опубліковано: (2016)
Development of electric arc spray coatings for reconditioning rods of hydraulic cylinders of mining equipment, using flux-cored wires
за авторством: T. R. Stupnitskij, та інші
Опубліковано: (2017)
за авторством: T. R. Stupnitskij, та інші
Опубліковано: (2017)
Corrosion resistance of prestressing steel wires
за авторством: M. I. Hredil, та інші
Опубліковано: (2014)
за авторством: M. I. Hredil, та інші
Опубліковано: (2014)
Energy-saving softening heat treatment of alloy steels
за авторством: V. A. Lutsenko, та інші
Опубліковано: (2022)
за авторством: V. A. Lutsenko, та інші
Опубліковано: (2022)
Low carbon steel for hot metal deformation tools (review)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
Current directions of application of lux-cored wire welding of low-alloy increased and high strength steels
за авторством: V. N. Shlepakov, та інші
Опубліковано: (2017)
за авторством: V. N. Shlepakov, та інші
Опубліковано: (2017)
New technology of molybdenum rod production using electron beam melting
за авторством: V. O. Mushegjan
Опубліковано: (2013)
за авторством: V. O. Mushegjan
Опубліковано: (2013)
Scientific and technological achievements of metal heat treatment for mechanical engineering in 2009 - 2014
за авторством: V. V. Parusov, та інші
Опубліковано: (2014)
за авторством: V. V. Parusov, та інші
Опубліковано: (2014)
Approach for preliminary determination of the type and number of vertical rods in grounding installations
за авторством: P. Petrov, та інші
Опубліковано: (2020)
за авторством: P. Petrov, та інші
Опубліковано: (2020)
Production of rods of sintered titanium alloys by using different methods of welding (Review)
за авторством: A. V. Ovchinnikov
Опубліковано: (2015)
за авторством: A. V. Ovchinnikov
Опубліковано: (2015)
On the role of crystallographic texture under corrosion of hot-drawn carbon steel rods
за авторством: N. M. Shkatuliak, та інші
Опубліковано: (2012)
за авторством: N. M. Shkatuliak, та інші
Опубліковано: (2012)
Legal freedom as a fundamental basis of construction civil society
за авторством: M. V. Osiadla
Опубліковано: (2015)
за авторством: M. V. Osiadla
Опубліковано: (2015)
Analysis of the plasticity characteristics of progressively drawn steel wires
за авторством: Hredil, М.І., та інші
Опубліковано: (2015)
за авторством: Hredil, М.І., та інші
Опубліковано: (2015)
Analysis of the plasticity characteristics of progressively drawn steel wires
за авторством: M. I. Hredil, та інші
Опубліковано: (2015)
за авторством: M. I. Hredil, та інші
Опубліковано: (2015)
Production of steel and rolled products of steel S355…N for manufacturing metalware for construction of the Olympic National Sports Complex in Kiev
за авторством: S. A. Matvienkov, та інші
Опубліковано: (2012)
за авторством: S. A. Matvienkov, та інші
Опубліковано: (2012)
Environmentally-assisted fatigue crack growth in prestressing steel wires
за авторством: J. Toribio, та інші
Опубліковано: (2011)
за авторством: J. Toribio, та інші
Опубліковано: (2011)
The Simulation of Gas Flow in Cylindrical Channels of High-Voltage Plasma Torches with Rod Electrodes
за авторством: A. M. Borovskoj, та інші
Опубліковано: (2012)
за авторством: A. M. Borovskoj, та інші
Опубліковано: (2012)
Corrosion-fatigue crack growth in 20N2M steel operating pump rods
за авторством: N. V. Kret, та інші
Опубліковано: (2020)
за авторством: N. V. Kret, та інші
Опубліковано: (2020)
Схожі ресурси
-
Effect of heat treatment, microalloying with boron and ageing treatment on the work of fracture of wire rod under tension
за авторством: V. V. Parusov, та інші
Опубліковано: (2013) -
The interrelation of the chemical composition and mechanical properties of constructional alloyed steels
за авторством: V. A. Lutsenko, та інші
Опубліковано: (2018) -
On the possibility of forecasting mechanical properties of cold-deformed metal products from pearlite grade steel
за авторством: E. V. Parusov, та інші
Опубліковано: (2021) -
Regularities of the retained austenite formation in the complexly alloyed steel (overview)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2021) -
Study of the influence of cryogene processing on the characteristics of structure formation and fatigue resistance of 38KHN3MFA steel after preliminary thermal hardening
за авторством: S. V. Bobyr, та інші
Опубліковано: (2022)