Cover Image

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains

Saved in:

Bibliographic Details
Date:	2022
Main Authors:	V. I. Lavrinenko, O. O. Pasichnyi, V. H. Poltoratskyi, Yu. Solod, D. H. Muzychka
Format:	Article
Language:	English
Published:	2022
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001322020
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
by: V. I. Lavrinenko, et al.
Published: (2021)

Application of diamond grinding powder with combined coatings on the surface of diamond grains in a grinding tool
by: V. I. Lavrinenko, et al.
Published: (2024)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
by: S. V. Rjabchenko, et al.
Published: (2018)

Grinding of gear wheels by diamond-abrasive wheels
by: S. V. Rjabchenko
Published: (2017)

Gear grinding with superabrasive dish wheels
by: S. V. Rjabchenko
Published: (2014)

Gear grinding with superabrasive dish wheels
by: S. V. Rjabchenko
Published: (2014)

Determining cutting force components in deep grinding of revolution surfaces by oriented el&#039;bor wheel
by: V. I. Kalchenko, et al.
Published: (2012)

Specifying the process parameters for diamond dressing of grinding wheels
by: Ya. O. Shakhbazov, et al.
Published: (2019)

Highly porous cubic boron nitride wheels for dry grinding
by: V. K. Starkov
Published: (2013)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
by: A. A. Adamovskij, et al.
Published: (2015)

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance
by: V. I. Lavrinenko, et al.
Published: (2016)

Improving the Performance of Diamond Grinding Tool by Modifying the Synthetic Diamond Surfaces
by: V. I. Lavrinenko, et al.
Published: (2024)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
by: V. I. Lavrinenko, et al.
Published: (2016)

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process
by: P. G. Matjukha, et al.
Published: (2017)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
by: S. V. Sokhan, et al.
Published: (2020)

Diamond grinding of the WC–8Co–steel 45 composition using the control of the wheel cutting ability by an electroerosion method
by: A. V. Burdin, et al.
Published: (2013)

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency
by: V. I. Lavrinenko
Published: (2024)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
by: V. I. Lavrinenko
Published: (2019)

The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam
by: T. P.G. Nguen
Published: (2016)

Rotational scheme of a high-efficient dressing of grinding wheels from cubic boron nitride
by: D. Hessel, et al.
Published: (2015)

Diamond grinding of ceramic balls with a circular feed
by: S. V. Sokhan, et al.
Published: (2024)

Diamond grinding of ceramic balls with a circular feed
by: S. V. Sokhan, et al.
Published: (2023)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
by: V. I. Lavrinenko
Published: (2016)

Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
by: V. K. Starkov, et al.
Published: (2015)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
by: V. I. Lavrinenko
Published: (2019)

The effect of the velocity of rotation in the vibro-grinding process on the surface state
by: K. Hamouda, et al.
Published: (2016)

Cast grinding bodies
by: Ju. V. Moiseev, et al.
Published: (2017)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
by: Jaworski, J., et al.
Published: (2016)

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks
by: H. A. Petasiuk, et al.
Published: (2019)

Picnometric-additive method for determining the degree of coating of grinding powders superhard matirials with the use of an extrapolation-affine 3D grain model
by: H. A. Petasiuk, et al.
Published: (2020)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 2. Water freezing in porous space of superabrasive composites
by: V. I. Lavrinenko
Published: (2019)

Structurally changed surface layers of contact surfaces of a SHM wheel and a workpiece as a factor of increasing their wear resistances (variation of elemental composition)
by: V. I. Lavrinenko
Published: (2013)

The influence of circumferential waviness of the diamond wheel working surface on the machined surface roughness
by: O. O. Pasichnyi, et al.
Published: (2019)

Structurally strengthened surface layers of contact surfaces of a SHM wheel and a workpiece machined as a factor of increasing their wear resistance (a film component)
by: V. I. Lavrinenko
Published: (2012)

Comparative analysis of the shape-similarity of the projection of the grains of grinding powders of synthetic and natural technical diamond and their homogeneity by this characteristic
by: H. A. Petasiuk, et al.
Published: (2022)

Development of diamond grinding ribbons on rubber bond
by: V. M. Bychykhin, et al.
Published: (2018)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
by: V. I. Lavrinenko, et al.
Published: (2013)

Evolution of protective linings for the ore-grinding mills
by: V. I. Dyrda, et al.
Published: (2014)

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool
by: V. V. Smokvyna, et al.
Published: (2023)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
by: V. G. Poltoratskij, et al.
Published: (2016)