Numerical analysis of the two-frequency technique for measuring the torch discharge resistance with or without taking into account its equivalent inductance

Numerical analysis of the two-frequency technique for measuring the torch discharge resistance with or without taking into account its equivalent inductance

Збережено в:

Бібліографічні деталі
Дата:	2018
Автор:	A. O. Puzanov
Формат:	Стаття
Мова:	English
Опубліковано:	2018
Назва видання:	Radiophysics and Electronics
Онлайн доступ:	http://jnas.nbuv.gov.ua/article/UJRN-0000849638
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Репозитарії

Library portal of National Academy of Sciences of Ukraine | LibNAS

Схожі ресурси

Two-frequency approach for determina-tion of a torch discharge resistance within M. S. Neiman equivalent scheme with added equivalent inductance of the discharge
за авторством: A. O. Puzanov
Опубліковано: (2018)

Employment of electric torch discharge and a steam-gas generator in surface schooping of materials
за авторством: O. O. Puzanov
Опубліковано: (2020)

Measurement of gas-plasma torch temperature
за авторством: Klepikov, V.F., та інші
Опубліковано: (2001)

The main characteristics and parameters of the equivalent circuit of induction motors taking into account the changes of the magnetic condition of the magnetic cores
за авторством: V. P. Onoprych
Опубліковано: (2016)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
за авторством: Filatov, Heorhii V.
Опубліковано: (2020)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
за авторством: Filatov, Heorhii V.
Опубліковано: (2020)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
за авторством: H. V. Filatov
Опубліковано: (2020)

study of high-frequency induction heating and melting of conducting workpieces taking into account the non-uniform current density in inductor windings
за авторством: A. A. Shcherba, та інші
Опубліковано: (2015)

Cyclic transients in the circuits of electric discharge installations taking into account the influence of magnitude and rate of discharge currents rise on resistance of electric spark load
за авторством: A. A. Shcherba, та інші
Опубліковано: (2018)

Deposition of nanocrystalline silicon films into low frequency induction RF discharge
за авторством: Deryzemlia, A.M., та інші
Опубліковано: (2014)

The analytical model of measurement with GPS syncronization taking into account the stochastic effects
за авторством: A. P. Bondariev, та інші
Опубліковано: (2017)

Modeling of Nonlinear Resistance of Electro-Spark Load Taking into Account its Changes During Discharge Current Flowing in the Load and at Zero Current in it
за авторством: A. A. Shcherba, та інші
Опубліковано: (2014)

A TECHNIQUE OF MEASURING OF RESISTANCE OF A GROUNDING DEVICE
за авторством: Nizhevskyi, I. V., та інші
Опубліковано: (2016)

A TECHNIQUE OF FULL-SCALE MEASUREMENTS OF THE RESISTANCE OF THE GROUNDING DEVICE
за авторством: Nizhevskyi, I. V., та інші
Опубліковано: (2018)

Numerical study of dynamic phenomena in the coal seam with taking into the account the influence of gas filtration and diffusion
за авторством: A. Dimaki, та інші
Опубліковано: (2010)

Numerical study of dynamic phenomena in the coal seam with taking into the account the influence of gas filtration and diffusion
за авторством: Dimaki, A., та інші
Опубліковано: (2010)

PROTECTION OF HOUSEHOLD APPLIANCES INDUCTION MOTORS AGAINST OVERCURRENT TAKING INTO ACCOUNT NONLINEAR DISTORTION OF PHASE CURRENT
за авторством: Sereda, O. G., та інші
Опубліковано: (2015)

Investigation of bending vibrations in Voigt – Kelvin bars taking into account the nonlinear resistance forces
за авторством: Ya. Pukach
Опубліковано: (2014)

Stereoscopic Tracking of the Torch Trajectory for Welders Trainers
за авторством: E. V. Shapovalov, та інші
Опубліковано: (2013)

Determination of probabilistic properties of electrical characteristics of circuits of electric discharge installations taking into account their stochastically changing parameters
за авторством: A. A. Shcherba, та інші
Опубліковано: (2019)

New generation corrosion measurement instruments based on improved polarization resistance technique
за авторством: H. S. Vasyliev, та інші
Опубліковано: (2016)

Some aspects of thermal resistance measurement technique for IMPATT and light-emitting diodes
за авторством: A. E. Belyaev, та інші
Опубліковано: (2011)

Some aspects of thermal resistance measurement technique for IMPATT and light-emitting diodes
за авторством: Belyaev, A.E., та інші
Опубліковано: (2011)

The compatible action of bending with the tension of an isotropic plate containing a crack without contact of their tips and with taking into account plastic zones and material strengthening
за авторством: V. K. Opanasovych, та інші
Опубліковано: (2018)

The accuracy of rolling thickness adjustment in conditions of high-frequency disturbances taking into account the speed of roll setting devices
за авторством: Yu. Potap, та інші
Опубліковано: (2022)

FINITE ELEMENT TECHNIQUE FOR SOLUTION OF THERMO-CONTACT PROBLEMS AND ITS APPLICATION IN NUMERICAL ANALYSIS OF DEVICES WORKING WITH INDUCTION HEATING
за авторством: Pantelyat, Michael G., та інші
Опубліковано: (2016)

Finite element technique for solution of thermo-contact problems and its application in numerical analysis of devices working with induction heating
за авторством: Pantelyat, M.G., та інші
Опубліковано: (2016)

The numerical simulation of a 3D flow in the VKI-GENOA turbine cascade taking into account the laminar-turbulent transition
за авторством: S. V. Ershov, та інші
Опубліковано: (2015)

The numerical simulation of a 3D flow in the VKI-GENOA turbine cascade taking into account the laminar-turbulent transition
за авторством: Ершов, С. В., та інші
Опубліковано: (2015)

The numerical simulation of a 3D flow in the VKI-GENOA turbine cascade taking into account the laminar-turbulent transition
за авторством: Ершов, С. В., та інші
Опубліковано: (2015)

Research of operating modes of conductors in power supply systems of cranes with induction feed, taking into account the influence of higher harmonics of the current
за авторством: Andrienko, P. D., та інші
Опубліковано: (2021)

Numerical Techniques in Loop Quantum Cosmology
за авторством: Brizuela, D., та інші
Опубліковано: (2012)

Mathematical modeling of gas flow in plasma torch vortex chamber
за авторством: Butyrev, A.E., та інші
Опубліковано: (2008)

The formation of training sets for information-measuring systems for the diagnosis of electrical equipment, taking into account the results of vibration tests
за авторством: O. V. Bondarchuk, та інші
Опубліковано: (2020)

Financial risk management with taking account of information
за авторством: N. V. Kuznietsova
Опубліковано: (2018)

Financial risk management with taking account of information
за авторством: Kuznietsova, N. V.
Опубліковано: (2018)

Semiscalar equivalence of polynomial matrices and triangular similarity of numerical matrices
за авторством: B. Z. Shavarovskyi
Опубліковано: (2013)

Genetic mechanisms of the resistance of Escherichia coli to amino acid antimetabolites. 2. Study of the frequency of induction and properties of glyphosate resistant mutants
за авторством: Cherepenko, E.I.
Опубліковано: (1997)

Transient analysis in circuits of electric discharge installations with voltage feedback taking into account the recovery time of locking properties their semiconductor switches
за авторством: A. A. Shcherba, та інші
Опубліковано: (2018)

Research and development of technological systems based on high-frequency induction discharge for reactive ion-plasma etching of micro- and nanostructures
за авторством: S. V. Dudin
Опубліковано: (2009)