Buchumschlag

Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	V. G. Martynenko, Yu. N. Ulianov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Journal of mechanical engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000884656
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)

Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)

Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures
von: A. P. Zhudra
Veröffentlicht: (2014)

Influence of curing temperature and system composition on viscoelastic properties and crosslink density of polyurethane optically-transparent materials
von: N. V. Babkina, et al.
Veröffentlicht: (2012)

Dynamic Testing of Reinforced Glass Fibre-Epoxy Composite at Elevated Temperatures
von: Gieleta, R., et al.
Veröffentlicht: (2002)

Kinetics of thermolysis and burning of solid biofuel particles. Part 1. Experimental installation and research procedure
von: Zhovmir, M.
Veröffentlicht: (2016)

Kinetics of thermolysis and burning of solid biofuel particles. Part 1. Experimental installation and research procedure
von: M. M. Zhovmir
Veröffentlicht: (2016)

Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)

Solving the Problem of Linear Viscoelasticity for Piece-Wise Homogeneous Anisotropic Plates
von: S. A. Kaloerov, et al.
Veröffentlicht: (2017)

Investigation of AE characteristics of materials at high temperatures. Information 1. Basic procedures and testing bench
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)

Theoretical and experimental investigations in modern materials science and engineering technologies
von: H. M. Nykyforchyn
Veröffentlicht: (2011)

Deformation and Damageability of Composite Materials with Anisotropic Components (review)
von: L. P. Khoroshun, et al.
Veröffentlicht: (2013)

Performing experimental studies of mountain massif temperature around vertically installed heat exchanger
von: V. V. Velychko
Veröffentlicht: (2014)

Evaluation of ecological safety of military installations: the procedure, tools, criteria
von: V. V. Sharavara, et al.
Veröffentlicht: (2015)

Cementation of boron-containing liquid radioactive waste at elevated temperature
von: Yu. O. Olkhovyk, et al.
Veröffentlicht: (2019)

Absorption–desorption of carbon dioxide in carbon honeycombs at elevated temperatures
von: N. V. Krainyukova, et al.
Veröffentlicht: (2019)

The Experimental Installation for Processes of Gas Flow Cleaning from Liquid Highly Dispersed Particles Investigation
von: S. S. Ryzhkov, et al.
Veröffentlicht: (2010)

Photoelasticity of anisotropic materials
von: B. H. Mytsyk
Veröffentlicht: (2013)

Construction and Verification of the Constitutive Model of Pure Copper Deformation at Elevated Temperatures
von: Huang, S.H., et al.
Veröffentlicht: (2019)

Viscoelastic, thermophisics and relaxation properties of the nanofilled composites based on epoxy polymer
von: V. V. Korskanov, et al.
Veröffentlicht: (2015)

Studies of Subcritical Crack Growth in the Viscoelastic Anisotropic Bodies Using the Continued Fraction Operator Method: Synthesis and Summary
von: A.O. Kaminsky
Veröffentlicht: (2021)

Practical Experience of Experimental Microvascular Procedures
von: Byzov, Denis V., et al.
Veröffentlicht: (2015)

Practical experience of experimental microvascular procedures
von: D. V. Byzov, et al.
Veröffentlicht: (2015)

Modeling and assessing of steel strength for turbogenerators under complex loading and at elevated temperatures
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2021)

The Assessment of elasto-plastic properties of materials from nanoindentation and computer modeling. 2. Experimental-and-theoretical procedure
von: V. I. Kushch, et al.
Veröffentlicht: (2012)

Waves in a Fluid Saturated Porous Viscoelastic Material
von: R. M. Israfilov, et al.
Veröffentlicht: (2014)

Mathematical modeling of heat conduction process for 2D-periodic anisotropic composite materials
von: G. L. Gorynin, et al.
Veröffentlicht: (2014)

Peculiarities of the development of hydrogels based on chitosan and poly(ethylene glycol) disuccinate at elevated temperature
von: Yu. Zholobko, et al.
Veröffentlicht: (2014)

Experimental and numerical studies of the work process in pneumatic abrasive installations
von: Baha Vadym, et al.
Veröffentlicht: (2025)

Experimental Investigation of B₄C Particulate Reinforced Aluminium 6061 Based Composite Material in Wire-Cut EDM
von: Karabulut, Ş., et al.
Veröffentlicht: (2015)

Installation for gas-phase deposition of materials
von: Lonin, Yu.F., et al.
Veröffentlicht: (2004)

Installation for gas-phase deposition of materials
von: A. F. Korzh, et al.
Veröffentlicht: (2007)

Numerical-Analytical Determination of Poisson Ratio for Viscoelastic Isotropic Materials
von: B. P. Maslov
Veröffentlicht: (2018)

Experimental investigations of two-level temperature controllers for transport thermoelectric refrigerators
von: S. O. Filin, et al.
Veröffentlicht: (2013)

Coalescence of two unequal collinear cracks in a viscoelastic composite plate
von: A. O. Kaminskyi, et al.
Veröffentlicht: (2014)

Experimental investigation of thermal conductivity of moisture ceramic building materials
von: A. N. Nedbajlo, et al.
Veröffentlicht: (2017)

Influence of micron WC addition on the microstructure and mechanical properties of ultrafine WC–Co cemented carbides at the elevated temperature
von: C. Liu, et al.
Veröffentlicht: (2018)

Mechanical properties structural sensitivity of Al-Mg-Si ternary system cast aluminum alloys at elevated temperatures
von: P. M. Romanko, et al.
Veröffentlicht: (2014)

The role of the reference temperature in the construction of generalized viscoelastic functions for predicting damping properties of epoxy polymer
von: N. V. Babkina, et al.
Veröffentlicht: (2015)

Gas-abrasive wear resis-tance at elevated temperatures of coatings produced using arc metallization
von: V. I. Pokhmurskij, et al.
Veröffentlicht: (2013)