Buchumschlag

Modeling Crack Initiation in a Composite Under Bending

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
1. Verfasser:	Sh. G. Hasanov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Journal of mechanical engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000884659
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)

Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)

Modeling of Crack Resistance of Ion-Strengthened Silicate Glass under Bending Deformations
von: P. P. Hontarovskyi, et al.
Veröffentlicht: (2022)

Bending the Plate on Elastic Foundation with Initial Stresses under Action of Moving Load
von: Ju. Babich, et al.
Veröffentlicht: (2017)

Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
von: Rozumek, D., et al.
Veröffentlicht: (2011)

Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
von: D. Rozumek, et al.
Veröffentlicht: (2011)

Study of the impact of crack resistance parameters on the critical load of a specimen with a mode I crack under three-point bending in the framework of the cohesive zone model
von: V. L. Bogdanov, et al.
Veröffentlicht: (2024)

Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2021)

Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2021)

Two collinear cracks with contacting edges in the orthotropic shell of arbitrary curvature under bending
von: K. M. Dovbnia, et al.
Veröffentlicht: (2013)

Stress state of the shell of double curvature with two collinear cracks under bending loading
von: K. M. Dovbnia, et al.
Veröffentlicht: (2014)

Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: P. P. Hontarovskyi, et al.
Veröffentlicht: (2021)

Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
von: Yang, B., et al.
Veröffentlicht: (2018)

Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
von: Rozumek, D., et al.
Veröffentlicht: (2010)

Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
von: D. Rozumek, et al.
Veröffentlicht: (2010)

Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008)

Effect of initial stresses on fracture of composite material with a near-surface Mode III crack
von: V. L. Bohdanov
Veröffentlicht: (2013)

Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
von: F. F. Gasanov
Veröffentlicht: (2014)

Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)

Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
von: Гасанов, Ф. Ф.
Veröffentlicht: (2014)

Mode I crack initiation in orthotropic viscoelastic plate under biaxial loading
von: O. S. Bogdanova
Veröffentlicht: (2013)

Fatigue crack growth resistance of steels of long-term exploited steam pipeline bends
von: O. P. Ostash, et al.
Veröffentlicht: (2012)

Research of crack initiation and propagation under loading for providing impact resilience of protective coating
von: Sapronov, O.O., et al.
Veröffentlicht: (2019)

Stress-Strain State in Bending of Cirsular Plate with System of Cracks with Allowance for Strip Contact of their Edges
von: M. S. Slobodian, et al.
Veröffentlicht: (2024)

Investigation of the initial stage of fracture of a piece-homogeneous body with interface crack under compression along the interface
von: A. O. Kaminskyi, et al.
Veröffentlicht: (2020)

Study of the Stressed State Near the Crack That Initiates at the Inclusion Under Longitudinal Shift Wave Influence
von: A. S. Misharin, et al.
Veröffentlicht: (2018)

Study of the Stressed State Near the Crack That Initiates at the Inclusion Under Longitudinal Shift Wave Influence
von: Misharin, A.S., et al.
Veröffentlicht: (2018)

Study of the stressed state near the crack that initiates at the inclusion under longitudinal shift wave influence
von: Misharin, A. S., et al.
Veröffentlicht: (2019)

Study of the stressed state near the crack that initiates at the inclusion under longitudinal shift wave influence
von: Misharin, A. S., et al.
Veröffentlicht: (2019)

On one approach related to the study of the stress-strain state of piecewise homogeneous isotropic plate with a crack under bending considering the width of the contact area of its faces
von: V. K. Opanasovych, et al.
Veröffentlicht: (2015)

Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2006)

Role of non-metallic inclusions in initiation of cracks in arc surfacing
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2011)

Determination of the oscillational load parameters, in terms of the crack initiation in the rock
von: D. V. Klimenko
Veröffentlicht: (2016)

Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011)

Comparison of fatigue characteristics for some selected structural materials under bending and torsion
von: Kurek, М., et al.
Veröffentlicht: (2011)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: Kurek, M., et al.
Veröffentlicht: (2011)

Studying a crack initiation in terms of elastic oscillations in stress strain rock mass
von: Sdvyzhkova, О., et al.
Veröffentlicht: (2016)

Modeling of multiple cracking under thermo-mechanical fatigue effect
von: H. T. Sulym, et al.
Veröffentlicht: (2015)

The compatible action of bending with the tension of an isotropic plate containing a crack without contact of their tips and with taking into account plastic zones and material strengthening
von: V. K. Opanasovych, et al.
Veröffentlicht: (2018)