Buchumschlag

Possibilities of manufacturing three-layer welded honeycomb panels from aluminium alloys

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	L. V. Petrushinets, Ju. V. Falchenko, V. E. Fedorchuk, V. S. Shinkarenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000889642
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Modern methods of manufacturing three-layer panels from aluminium alloys (Review)
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2018)

Application of a layered composite material based on aluminium and titanium alloys to produce welded three-layer honeycomb panels
von: L. V. Petrushynets, et al.
Veröffentlicht: (2022)

Evaluation of thermal resistance of three-layer honeycomb panel produced of alloy YuIPM-1200 by the method of vacuum diffusion welding
von: I. A. Gusarova, et al.
Veröffentlicht: (2016)

Peculiarities of alloying of welded joint metal of highstrength aluminium alloy with scandium
von: V. E. Fedorchuk, et al.
Veröffentlicht: (2014)

Manufacture of stainless steel – aluminium transition pieces using method of pressure welding in vacuum
von: G. K. Kharchenko, et al.
Veröffentlicht: (2012)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Evaluation of the possibility of manufacturing and repairing engine parts from aluminium alloys by method of additive technology
von: M. O. Gnatenko, et al.
Veröffentlicht: (2018)

Electron beam welding of thin-sheet three- dimensional structures of aluminium alloys
von: A. A. Bondarev, et al.
Veröffentlicht: (2011)

Friction stir welding of composite, granulated and quasicrystalline aluminium alloys
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2011)

Formation of diffusion zone in welded joints of porous aluminium alloy with monolithic magnesium alloy at chemical activation by gallium
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2017)

Welded Structures from Aluminium Alloys
von: T. M. Labur
Veröffentlicht: (2020)

Non-destructive testing of elements of titanium honeycomb panels by shearography method using vacuum load
von: L. M. Lobanov, et al.
Veröffentlicht: (2021)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: K. A. Avramov, et al.
Veröffentlicht: (2022)

Deformation-free welding of stringer panels from titanium alloy VT20
von: B. E. Paton, et al.
Veröffentlicht: (2014)

Hybrid plasma-arc welding of thin-walled panels from aluminuim alloy
von: V. N. Korzhik
Veröffentlicht: (2017)

Distribution of chemical elements in the zone of joining of aluminium alloy AMg6 with titanium alloy VT6 produced using diffusion welding in vacuum
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2013)

Resistance welding of shape-memory copper—aluminium alloy
von: B. E. Paton, et al.
Veröffentlicht: (2015)

Investigation of heat treatment effect on the strength of Al–Ti bimetal honeycomb core
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2021)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: B. V. Uspenskyi, et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)

Vacuum diffusion welding of γ-TiAl intermetallic with high-temperature nickel alloy with application of intermediate Al/Ni nanolayers
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2019)

Friction stir welding of aluminium alloys of different systems of alloying
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2010)

Mechanical properties and structural features of butt joints produced at FSW of aluminium alloys of different alloying systems
von: A. H. Pokliatskyi, et al.
Veröffentlicht: (2023)

Metallurgical processes in the weld metal at electron beam welding of 01570 aluminium alloy
von: V. V. Skriabinskyi, et al.
Veröffentlicht: (2022)

Manufacture of coaxial copper-aluminium tubular parts by using explosion welding and drawing
von: A. G. Bryzgalin, et al.
Veröffentlicht: (2015)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)

Influence of temperature of heating in vacuum on behaviour of oxide film on the surface of γ-TiAl intermetallic alloy
von: Ju. V. Falchenko, et al.
Veröffentlicht: (2017)

Calculation of the radius of transition of the weld to base metal of aluminium alloy welded joints
von: A. V. Moltasov, et al.
Veröffentlicht: (2019)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: K. V. Avramov, et al.
Veröffentlicht: (2021)

Consumable electrode welding of d16 aluminium alloy with weld metal microalloying
von: T. M. Labur, et al.
Veröffentlicht: (2022)

Main tendencies in development of plasma-arc welding of aluminium alloys
von: A. A. Grinjuk, et al.
Veröffentlicht: (2015)

Modern methods of welding of aluminium alloys with steels (Review)
von: D. M. Kaleko
Veröffentlicht: (2012)

Development of laser welding of aluminium alloys at the E. O. Paton Electric Welding Institute (Review)
von: Ju. Khaskin
Veröffentlicht: (2013)

Flash-butt welding of products of highstrength alloys on aluminium base
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2013)

Peculiarities of laser arc consumable electrode welding of high-strength aluminium alloys
von: V. D. Sheljagin, et al.
Veröffentlicht: (2009)

Vacuum diffusion welding of foil from powder nickel-chromium alloy
von: I. A. Gusarova, et al.
Veröffentlicht: (2017)

In- process quality control of welded panels of VT20 alloy using method of electron shearography
von: L. M. Lobanov, et al.
Veröffentlicht: (2011)