Influence of residual process stresses on brittle fracture resistance of WWER-1000 reactor baffle in case of an emergency
Gespeichert in:
| Datum: | 2022 |
|---|---|
| Hauptverfasser: | O. V. Makhnenko, S. M. Kandala |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2022
|
| Schriftenreihe: | Technical diagnostics and non-destructive testing |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0001379726 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Evaluation of brittle fracture resistance of WWER-1000 reactor enclosure during long-term service, taking into account the residual technological stresses
von: O. V. Makhnenko, et al.
Veröffentlicht: (2022)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2022)
Mathematical modeling of residual stresses in WWER-1000 elements after heat treatment
von: O. V. Makhnenko, et al.
Veröffentlicht: (2021)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2021)
Redistribution of residual welding stresses inside the inner-body shaft of the reactor WWER-1000 in the process of service
von: O. V. Makhnenko, et al.
Veröffentlicht: (2014)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2014)
Radiation creep effect on the form change determination of WWER-1000 reactor core baffle under longterm operation
von: Yu. Chyrkov, et al.
Veröffentlicht: (2021)
von: Yu. Chyrkov, et al.
Veröffentlicht: (2021)
Mathematical modeling of residual stresses in composite welded joints of WWER-1000 reactor vessel cover with CPS nozzles
von: A. A. Makarenko, et al.
Veröffentlicht: (2022)
von: A. A. Makarenko, et al.
Veröffentlicht: (2022)
Impact of technological parameters of arc deposition of an anti-corrosion layer in the vessel of WWER-1000 reactor on residual stress distribution
von: O. V. Makhnenko, et al.
Veröffentlicht: (2020)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2020)
Empirical predicted residual life of the base metal of MCP of WWER-1000 reactors in operation
von: Gozhenko, S.V.
Veröffentlicht: (2023)
von: Gozhenko, S.V.
Veröffentlicht: (2023)
Modeling of residual stresses in the area of technological welds of PWR-1000 reactor shells
von: O. V. Makhnenko, et al.
Veröffentlicht: (2018)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2018)
A Data Scatter for a Shift of the Ductile to Brittle Transition Temperature for WWER¬1000 Reactor Pressure Vessel Materials
von: V. N. Revka
Veröffentlicht: (2018)
von: V. N. Revka
Veröffentlicht: (2018)
Modeling of residual welding stresses, radiation swelling and stressed state of enclosure of the reactor VVER-1000 in the process of operation
von: O. V. Makhnenko, et al.
Veröffentlicht: (2016)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2016)
Comparison of Маster curve with normative method of estimating WWER-1000 reactor pressure vessel metal fracture toughness
von: V. M. Revka, et al.
Veröffentlicht: (2024)
von: V. M. Revka, et al.
Veröffentlicht: (2024)
Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
von: Gogotsi, G.A., et al.
Veröffentlicht: (2004)
von: Gogotsi, G.A., et al.
Veröffentlicht: (2004)
Features of application of high-viscosity dampers to improve the seismic resistance of high-temperature filters in NPP with WWER-1000 reactors
von: V. V. Kirichok, et al.
Veröffentlicht: (2016)
von: V. V. Kirichok, et al.
Veröffentlicht: (2016)
Integrated Surveillance Specimen Program for WWER-1000/V-320 Reactor Pressure Vessels
von: Brumovský, M., et al.
Veröffentlicht: (2007)
von: Brumovský, M., et al.
Veröffentlicht: (2007)
The influence of the operated gas pipeline steels texture on their resistance to brittle fracture
von: O. I. Zvirko, et al.
Veröffentlicht: (2018)
von: O. I. Zvirko, et al.
Veröffentlicht: (2018)
Infuence of the ratio of dynamic and static stresses on brittle fracture resistance of low-alloyed steel welded joints
von: V. A. Degtjarev
Veröffentlicht: (2017)
von: V. A. Degtjarev
Veröffentlicht: (2017)
Problems of brittle fracture mechanics
von: M. H. Stashchuk
Veröffentlicht: (2018)
von: M. H. Stashchuk
Veröffentlicht: (2018)
Problems of brittle fracture mechanics
von: M. H. Stashchuk
Veröffentlicht: (2012)
von: M. H. Stashchuk
Veröffentlicht: (2012)
Problems of brittle fracture mechanics
von: M. H. Stashchuk
Veröffentlicht: (2017)
von: M. H. Stashchuk
Veröffentlicht: (2017)
Problems of brittle fracture mechanics
von: M. H. Stashchuk
Veröffentlicht: (2016)
von: M. H. Stashchuk
Veröffentlicht: (2016)
Problems of brittle fracture mechanics
von: M. H. Stashchuk
Veröffentlicht: (2011)
von: M. H. Stashchuk
Veröffentlicht: (2011)
Problems of brittle fracture mechanics
von: M. H. Stashchuk
Veröffentlicht: (2010)
von: M. H. Stashchuk
Veröffentlicht: (2010)
Models of WWER-1000 nuclear reactor with division into zones on verti-cal axis for information technology of control
von: V. P. Severin, et al.
Veröffentlicht: (2021)
von: V. P. Severin, et al.
Veröffentlicht: (2021)
Estimation of the error of functionals calculation results of the neutron flux onto the WWER 1000 reactor pressure vessel
von: V. L. Demekhin, et al.
Veröffentlicht: (2013)
von: V. L. Demekhin, et al.
Veröffentlicht: (2013)
Estimation of the error of functionals calculation results of the neutron flux onto the WWER 1000 reactor pressure vessel
von: V. L. Demekhin, et al.
Veröffentlicht: (2012)
von: V. L. Demekhin, et al.
Veröffentlicht: (2012)
Two-baffle trap for macroparticles
von: Aksyonov, D.S.
Veröffentlicht: (2014)
von: Aksyonov, D.S.
Veröffentlicht: (2014)
Analysis of the influence of nuclear fuel burnup on the 16N formation rate in the primary coolant circuit of WWER-1000 reactor
von: Yu. V. Fylonych, et al.
Veröffentlicht: (2021)
von: Yu. V. Fylonych, et al.
Veröffentlicht: (2021)
Brittle fracture resistance of the metal of Shukhov's lattice hyperboloid tower
von: H. V. Krechkovska, et al.
Veröffentlicht: (2014)
von: H. V. Krechkovska, et al.
Veröffentlicht: (2014)
Development of firearm silencers with spherical baffles
von: O. V. Pilipenko, et al.
Veröffentlicht: (2017)
von: O. V. Pilipenko, et al.
Veröffentlicht: (2017)
The Use of Master Curve Method for Statistical Re-Evaluation of Surveillance Test Data for WWER-1000 Reactor Pressure Vessels
von: Revka, V.M., et al.
Veröffentlicht: (2010)
von: Revka, V.M., et al.
Veröffentlicht: (2010)
Increase of brittle fracture resistance of metal of heat-affected zone in railway wheel surfacing
von: A. A. Gajvoronskij, et al.
Veröffentlicht: (2017)
von: A. A. Gajvoronskij, et al.
Veröffentlicht: (2017)
Mathematical simulation of microstructure phase transformations at welding heating by example corrosion resistant cladding of the reactor vessel VVER-1000
von: O. V. Makhnenko, et al.
Veröffentlicht: (2018)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2018)
Determination of Stiffness Characteristics for WWER-1000 Support Components
von: V. M. Vasylchenko, et al.
Veröffentlicht: (2019)
von: V. M. Vasylchenko, et al.
Veröffentlicht: (2019)
Mathematical Models for Investigation of WWER¬1000/320 Transients
von: E. N. Nikulina, et al.
Veröffentlicht: (2018)
von: E. N. Nikulina, et al.
Veröffentlicht: (2018)
Neutron Embrittlement of WWER Reactors: EC-Supported Projects
von: Ahlstrand, R., et al.
Veröffentlicht: (2004)
von: Ahlstrand, R., et al.
Veröffentlicht: (2004)
Calculation of static strength resistance to brittle fracture and cyclic crack resistance of steel pipe NPP not im-portant to safety
von: T. I. Matchenko, et al.
Veröffentlicht: (2015)
von: T. I. Matchenko, et al.
Veröffentlicht: (2015)
An improved method for automated control of the WWER-1000 power maneuvering
von: Huiyu Zhou, et al.
Veröffentlicht: (2017)
von: Huiyu Zhou, et al.
Veröffentlicht: (2017)
Metalophysical problems of WWER reactor vessel welding joints reliability
von: I. H. Sharaievskyi, et al.
Veröffentlicht: (2022)
von: I. H. Sharaievskyi, et al.
Veröffentlicht: (2022)
Generation of MeV -energy protons in WWER reactor core
von: Gann, A.V., et al.
Veröffentlicht: (2009)
von: Gann, A.V., et al.
Veröffentlicht: (2009)
Mathematical modeling of residual stress relaxation during performance of postweld heat treatment
von: O. V. Makhnenko, et al.
Veröffentlicht: (2023)
von: O. V. Makhnenko, et al.
Veröffentlicht: (2023)
Ähnliche Einträge
-
Evaluation of brittle fracture resistance of WWER-1000 reactor enclosure during long-term service, taking into account the residual technological stresses
von: O. V. Makhnenko, et al.
Veröffentlicht: (2022) -
Mathematical modeling of residual stresses in WWER-1000 elements after heat treatment
von: O. V. Makhnenko, et al.
Veröffentlicht: (2021) -
Redistribution of residual welding stresses inside the inner-body shaft of the reactor WWER-1000 in the process of service
von: O. V. Makhnenko, et al.
Veröffentlicht: (2014) -
Radiation creep effect on the form change determination of WWER-1000 reactor core baffle under longterm operation
von: Yu. Chyrkov, et al.
Veröffentlicht: (2021) -
Mathematical modeling of residual stresses in composite welded joints of WWER-1000 reactor vessel cover with CPS nozzles
von: A. A. Makarenko, et al.
Veröffentlicht: (2022)