Buchumschlag

Effect of titanium carbides on the formation of microstructure and improvement of mechanical characteristics of the weld metal

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	I. K. Pokhodnia, V. V. Holovko, S. M. Stepaniuk, Yu. Yermolenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Materials Science (Physicochemical mechanics of materials)
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000931827
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
von: Yu. O. Shyshkina, et al.
Veröffentlicht: (2018)

The influence of introducing refractory compounds into the weld pool on the weld metal dendritic structure
von: V. V. Holovko, et al.
Veröffentlicht: (2020)

Annealing Effect on the Microstructure and Mechanical Properties of a Thin Titanium Nitride Film
von: S. C. Her, et al.
Veröffentlicht: (2014)

Annealing Effect on the Microstructure and Mechanical Properties of a Thin Titanium Nitride Film
von: Her, S.C., et al.
Veröffentlicht: (2014)

Effect of dispersity of powder, pressure and sintering temperatures for microstructure and physico-mechanical properties of boron carbide ceramics
von: V. S. Urbanovich, et al.
Veröffentlicht: (2018)

Effect of parameters of pulse-arc welding on the formation of weld metal and microstructure of heat-affected-zone of 09G2S steel
von: Yu. Maksymov, et al.
Veröffentlicht: (2022)

Influence of introduction of refractory particles to welding pool on structure and properties of weld metal
von: V. V. Holovko, et al.
Veröffentlicht: (2020)

Microstructure of weld metal in ck45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2018)

Effect of local heat treatment in EBW of titanium alloys with silicide hardening on weld metal mechanical properties
von: E. L. Vrzhizhevskij, et al.
Veröffentlicht: (2013)

Effect of crystallinity of WC on microstructure, properties and application of WC–Co cemented carbide
von: Z. Xiang, et al.
Veröffentlicht: (2021)

Assessment of mechanical properties of microstructural objects of welded joints
von: Ja. Ishchenko, et al.
Veröffentlicht: (2009)

Microstructure and properties of porous skeletal composites on based of the ultra-coarse-grained tungsten carbide with metal coating
von: I. V. Andreiev, et al.
Veröffentlicht: (2022)

Structure of titanium carbide hard metals obtained by electric discharge synthesis methods
von: E. V. Lipjan, et al.
Veröffentlicht: (2019)

Microstructure and hardness of metal of welded joints of aluminium-copper alloy
von: R. Alapati, et al.
Veröffentlicht: (2009)

Effect of Varying Heat Treatment Regimes on Microstructure and Mechanical Properties of P92 Steel Welds
von: V. K. Pal, et al.
Veröffentlicht: (2022)

Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
von: I. V. Plyushchay, et al.
Veröffentlicht: (2020)

Boron impurity effect on the structural, elastic, and electronic properties of titanium carbide
von: I. V. Pliushchai, et al.
Veröffentlicht: (2020)

Formation of Coatings by a Method of Overlay Laser Welding of Powders of Titanium and Silicon Carbide on a Surface of Low-Carbon Steel
von: T. V. Tarasova, et al.
Veröffentlicht: (2013)

Features of the structure and properties of metal layers deposited with pre-application of titanium and boron carbides
von: V. V. Peremitko, et al.
Veröffentlicht: (2022)

Formation of microstructure and mechanical properties of VT22 titanium alloy in non-equilibrium conditions of rapid thermal treatment
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)

Numerical modeling and prediction of microstructure of welded joint metal in high-strength steel welding (Review)
von: Ju. Ermolenko, et al.
Veröffentlicht: (2014)

Effect of Varying Heat Treatment Regimes on Microstructure and Mechanical Properties of P92 Steel Welds
von: Pal, Vinay Kumar, et al.
Veröffentlicht: (2022)

Effect of Varying Heat Treatment Regimes on Microstructure and Mechanical Properties of P92 Steel Welds
von: Pal, Vinay Kumar, et al.
Veröffentlicht: (2022)

The influence of thermal treatment on microstructure and mechanical properties of Ti–Nb–Mo titanium alloys
von: O. M. Myslyvchenko, et al.
Veröffentlicht: (2020)

Peculiarities of formation of wear-resistant titanium carbide coatings by the method of electrophoretic deposition
von: H. A. Bahliuk, et al.
Veröffentlicht: (2015)

Influence of micron WC addition on the microstructure and mechanical properties of ultrafine WC–Co cemented carbides at the elevated temperature
von: C. Liu, et al.
Veröffentlicht: (2018)

Investigation of interrelation of mechanical characteristics, microstructure and informative parameters of NDT
von: M. O. Karpash
Veröffentlicht: (2012)

Removal of inclusions of titanium carbide TiC in electron beam melting of titanium
von: S. V. Akhonin, et al.
Veröffentlicht: (2012)

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2019)

Influence of laser power and welding velocity on the microstructure of Zr-based bulk metallic glass welded joints
von: W. Haiyan, et al.
Veröffentlicht: (2019)

Production and properties of hot-pressed materials based on silicon carbide with additions of boron and titanium carbides
von: V. V. Ivzhenko, et al.
Veröffentlicht: (2016)

The influence of titanium containing inoculates on structure of low-alloy high-strength steel weld metals
von: H. M. Hryhorenko, et al.
Veröffentlicht: (2020)

Microstructure and mechanical properties of metals and alloys deformed in liquid nitrogen: review
von: M. A. Vasilev, et al.
Veröffentlicht: (2012)

Properties of nickel powder alloys with titanium carbide strengthening
von: T. S. Cherepova, et al.
Veröffentlicht: (2016)

Formation of welded joints in narrowgap magnetically — controlled arc welding of titanium
von: Ju. Belous, et al.
Veröffentlicht: (2011)

Microstructure and mechanical properties of parts from high-strength titanium alloys produced by waam method (Review)
von: R. V. Selin, et al.
Veröffentlicht: (2021)

Nature of distribution of non-metallic inclusions in structural components of weld metal while using arc welding methods
von: V. V. Holovko
Veröffentlicht: (2020)

Methods to improve technological effectiveness of rectifiers for mechanized welding and surfacing (Review)
von: I. I. Zaruba, et al.
Veröffentlicht: (2011)

Influence of the nature of distribution of non-metallic inclusions on the mechanical properties of weld metal of low-alloy steels
von: V. V. Holovko, et al.
Veröffentlicht: (2023)

Friction stir welding is an effective method of improvement of service characteristics of structures
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2010)