Buchumschlag

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	L. N. Devin, N. E. Stakhniv, Ju. A. Melnijchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000940190
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
von: N. E. Stakhniv, et al.
Veröffentlicht: (2018)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
von: N. E. Stakhniv, et al.
Veröffentlicht: (2019)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
von: L. N. Devin, et al.
Veröffentlicht: (2019)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

The effect of titanium and tungsten coating the surface of diamond monocrystals on the wear resistance of rock-cutting elements made from them
von: O. O. Bochechka, et al.
Veröffentlicht: (2019)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

Axial force when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

On calculation of cutting forces and characteristics of the contact interaction of a chip with the tool in cutting plastic metals
von: A. A. Vinogradov
Veröffentlicht: (2013)

Drilling carbide rock cutting tool of a new type
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)

Forced Vibrations of Piezoceramic Cylindrical Shell with Longitudinal Cut
von: V. L. Karlash
Veröffentlicht: (2015)

Modification of high speed steels by nanostructured materials for manufacture cutting inserts cutters of mining machines
von: L. V. Sudnik, et al.
Veröffentlicht: (2017)

An evaluating and detecting system of diamond saw blades cutting performance
von: Hu Yule, et al.
Veröffentlicht: (2010)

Analysis of Cutting Surface During Cutting of Electric Sheets
von: Spišák, E., et al.
Veröffentlicht: (2017)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

Stability to oxidation of initial mixes for prodaction of diamond – tungsten carbide nanocomposite
von: T. O. Kuryliak, et al.
Veröffentlicht: (2017)

Influence of macrostructure of diamond-containing composite materials on cutting capacity of the tool
von: A. M. Kuzej, et al.
Veröffentlicht: (2018)

The correlation model of acoustic emission in fine diamond turning
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Intellectual System of Refusals Diagnosing and Cutting Part of Cutting Tools Renewal
von: A. G. Derevjanchenko
Veröffentlicht: (2013)

A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
von: Gnatov, A. V.
Veröffentlicht: (2012)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

Comparison of results of the determination of the stresses on the cutting edges from diamond monocrystals by analytic 2-D and 3-D by the finite element method
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Analysis of cutting edge wear during drilling composite materials
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Investigation of acoustic emission signal on the stage of penetretion and exit when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2022)

Influence of modification of the diamond nanoparticles surface by W-C bond on sintering and properties of nanocomposite diamond-tungsten carbide
von: O. O. Bochechka, et al.
Veröffentlicht: (2018)

Corrosion behavior of 20 steel, copper, brass and aluminum in inhibited acid solutions
von: Z. V. Slobodian, et al.
Veröffentlicht: (2020)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
von: Jaworski, J., et al.
Veröffentlicht: (2016)

Effect of functional cover of particles of diamond nanopowders on sintering nanocomposites &quot;diamond - tungsten carbide&quot;
von: T. O. Kuryliak
Veröffentlicht: (2016)

По страницам Welding and Cutting
Veröffentlicht: (2010)

Regge cuts and NNLLA BFKL
von: V. S. Fadin
Veröffentlicht: (2019)

Cuts in undirected graphs. II
von: F. A. Sharifov, et al.
Veröffentlicht: (2020)

Cuts in undirected graphs. I
von: F. A. Sharifov, et al.
Veröffentlicht: (2020)

Regge cuts and NNLLA BFKL
von: V. S. Fadin
Veröffentlicht: (2019)

The influence of the processing mode on the parameters of diamond finishing of ceramic balls made of boron carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
von: Gnatov, A. V.
Veröffentlicht: (2013)