Influence of thermal cycle of welding on structure and mechanical properties of HAZ metal in high-strength steel produced by controlled rolling
Gespeichert in:
| Datum: | 2018 |
|---|---|
| Hauptverfasser: | V. D. Poznjakov, A. V. Zavdoveev, S. L. Zhdanov, A. V. Maksimenko |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2018
|
| Schriftenreihe: | Automatic Welding |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000947532 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Comparison of methods for evaluating the effect of welding thermal cycle on impact toughness of HAZ metal of low-alloy steel welded joints
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016)
Effect of welding thermal cycle on structure and properties of microalloyed structural steels
von: V. A. Kostin, et al.
Veröffentlicht: (2012)
von: V. A. Kostin, et al.
Veröffentlicht: (2012)
Resistance to formation of cold cracks in HAZ metal of welded joint of high-strength carbon steels
von: A. A. Gajvoronskij
Veröffentlicht: (2014)
von: A. A. Gajvoronskij
Veröffentlicht: (2014)
Laser-arc welding of high-strength steels with yield strength of more than 700 MPa
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015)
Effect of thermal cycle of welding on structural-phase transformations and properties of HAZ metal of medium-carbon alloyed steel of 30Kh2N2MF type
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015)
Resistance to brittle fracture of HAZ metal of 0.55-0.65% C high-strength steel joints made by arc welding
von: A. A. Gajvoronskij, et al.
Veröffentlicht: (2016)
von: A. A. Gajvoronskij, et al.
Veröffentlicht: (2016)
Effect of the modes of pulsed-arc welding on the parameters of weld and HAZ metal of welded joints made with Sv-08Kh20N9G7T wire
von: V. D. Poznjakov, et al.
Veröffentlicht: (2018)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2018)
Microstructure of HAZ metal of joints of high-strength structural steel WELDOX 1300
von: V. A. Kostin, et al.
Veröffentlicht: (2013)
von: V. A. Kostin, et al.
Veröffentlicht: (2013)
Weldability of high-strength microalloyed steel S460M
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016)
Influence of thermal cycle of surfacing on mechanical properties and resistance to brittle fracture of haz metal of rail wheel steel M76
von: V. D. Pozniakov, et al.
Veröffentlicht: (2019)
von: V. D. Pozniakov, et al.
Veröffentlicht: (2019)
Effect of chemical composition of microalloy steel and rate of cooling of HAZ metal of pipe welded joints on its structure and impact strength
von: A. A. Rybakov, et al.
Veröffentlicht: (2013)
von: A. A. Rybakov, et al.
Veröffentlicht: (2013)
Effect of metal structure of high-strength steel welded joints produced using different methods of welding on their service properties
von: L. I. Markashova, et al.
Veröffentlicht: (2018)
von: L. I. Markashova, et al.
Veröffentlicht: (2018)
Effect of cyclic loading on microstructure and cold resistance of HAZ metal of steel 10G2FB
von: V. D. Poznjakov, et al.
Veröffentlicht: (2014)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2014)
Influence of pulsed-arc welding conditions on change of parameters of weld and haz of welded joints and mechanical properties of lowalloy steels
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)
Comparative evaluation of properties of high-strength N-A-XTRA-70 steel welded joints produced using arc, laser and hybrid laser-arc welding
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016)
Comparative evaluation of methods for determination of fracture toughness of HAZ metal of low-alloy steel welded joints
von: V. S. But
Veröffentlicht: (2010)
von: V. S. But
Veröffentlicht: (2010)
Structure and fracture mode of haz metal of corrosion-resistant 06G2BDP steel
von: O. M. Berdnikova, et al.
Veröffentlicht: (2021)
von: O. M. Berdnikova, et al.
Veröffentlicht: (2021)
Experience in application of the new high-strength steel S355 J2 at the enterprises of Ukraine for welded metal structures of roofing over the NSC "Olimpiyskiy" in Kiev during its reconstruction
von: V. D. Poznjakov, et al.
Veröffentlicht: (2011)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2011)
Structure and properties of welded joints on steel S390 (S335 J2)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2012)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2012)
Energy dissipation during the tension of the St3 steel produced by severe plastic deformation by the rolling with shear
von: E. G. Pashinskaja, et al.
Veröffentlicht: (2016)
von: E. G. Pashinskaja, et al.
Veröffentlicht: (2016)
Effect of welding and postweld heating on structural transformations and properties of HAZ of welded joints on hardening steels
von: Ju. M. Lebedev
Veröffentlicht: (2009)
von: Ju. M. Lebedev
Veröffentlicht: (2009)
Influence of pulsed-arc welding modes on the structure and mechanical properties of welds and haz metal of welded joints of 30KH2N2MDF steel
von: O. A. Haivoronskyi, et al.
Veröffentlicht: (2022)
von: O. A. Haivoronskyi, et al.
Veröffentlicht: (2022)
Prediction of σ-phase content in HAZ of butt joints of duplex steels in arc welding
von: V. I. Makhnenko, et al.
Veröffentlicht: (2011)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2011)
Effect of parameters of arc, laser and hybrid methods of welding on structure and properties of butt joints of high-strength steel S460M
von: V. D. Poznjakov, et al.
Veröffentlicht: (2018)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2018)
Influence of welding modes on decarburization in the haz of R91 steel in welded joints of dissimilar steels after high-temperature tempering
von: M. O. Nimko, et al.
Veröffentlicht: (2022)
von: M. O. Nimko, et al.
Veröffentlicht: (2022)
Formation of cold cracks in welded joints of high-strength steels with 350-850 MPa yield strength
von: L. M. Lobanov, et al.
Veröffentlicht: (2013)
von: L. M. Lobanov, et al.
Veröffentlicht: (2013)
Mechanical strength of the weld metal in CK45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)
Effect of yttrium on redistribution of hydrogen and weld metal structure in welding of high-strength steels
von: I. K. Pokhodnja, et al.
Veröffentlicht: (2010)
von: I. K. Pokhodnja, et al.
Veröffentlicht: (2010)
Influence of heat treatment on local fracture susceptibility of HAZ metal of titanium-stabilized austenitic steel
von: Ju. V. Poletaev
Veröffentlicht: (2012)
von: Ju. V. Poletaev
Veröffentlicht: (2012)
Numerical modeling and prediction of microstructure of welded joint metal in high-strength steel welding (Review)
von: Ju. Ermolenko, et al.
Veröffentlicht: (2014)
von: Ju. Ermolenko, et al.
Veröffentlicht: (2014)
Impact of thermal cycles of welding on formation of the structure and properties of corrosion-resistant steel 06G2BDP
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)
Weldability of high-strength alloyed steels with yield strength of 590...785 MPa
von: V. D. Poznjakov
Veröffentlicht: (2018)
von: V. D. Poznjakov
Veröffentlicht: (2018)
Evaluation of strength of joints produced by welding with concurrent brazing
von: V. I. Savuljak, et al.
Veröffentlicht: (2015)
von: V. I. Savuljak, et al.
Veröffentlicht: (2015)
Methods for evaluation of strengthening of metal of welds of high-strength low-alloyed steels
von: V. A. Kostin, et al.
Veröffentlicht: (2011)
von: V. A. Kostin, et al.
Veröffentlicht: (2011)
Effect of thermal cycles of welding and external loading on structural-phase state and properties of joints of steel 17X2M
von: L. I. Markashova, et al.
Veröffentlicht: (2009)
von: L. I. Markashova, et al.
Veröffentlicht: (2009)
Features of heat-resistant properties of metal of not-rolled boilertubes produced from continuously cast billets of steel 20
von: L. V. Opryshko, et al.
Veröffentlicht: (2020)
von: L. V. Opryshko, et al.
Veröffentlicht: (2020)
Risk of cold crack formation in welding of structural high-strength steels
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)
Control of mechanical properties for higt strength steels through optimized welding processes
von: M. Fidler, et al.
Veröffentlicht: (2016)
von: M. Fidler, et al.
Veröffentlicht: (2016)
Properties of weld metal of double-sided welded joints of pipes of microalloyed steel of increased strength
von: A. A. Rybakov, et al.
Veröffentlicht: (2013)
von: A. A. Rybakov, et al.
Veröffentlicht: (2013)
Influence of non-metallic inclusions on formation of structure of weld metal of high-strength low-alloy steels
von: V. V. Golovko, et al.
Veröffentlicht: (2013)
von: V. V. Golovko, et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
Comparison of methods for evaluating the effect of welding thermal cycle on impact toughness of HAZ metal of low-alloy steel welded joints
von: V. D. Poznjakov, et al.
Veröffentlicht: (2016) -
Effect of welding thermal cycle on structure and properties of microalloyed structural steels
von: V. A. Kostin, et al.
Veröffentlicht: (2012) -
Resistance to formation of cold cracks in HAZ metal of welded joint of high-strength carbon steels
von: A. A. Gajvoronskij
Veröffentlicht: (2014) -
Laser-arc welding of high-strength steels with yield strength of more than 700 MPa
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015) -
Effect of thermal cycle of welding on structural-phase transformations and properties of HAZ metal of medium-carbon alloyed steel of 30Kh2N2MF type
von: V. D. Poznjakov, et al.
Veröffentlicht: (2015)