Theoretical study of particular qualities of changing the outrunning at rolling with higher compressions in hard friction conditions
Збережено в:
| Дата: | 2018 |
|---|---|
| Автор: | Ja. D. Vasilev |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2018
|
| Назва видання: | Metal and casting of Ukraine |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000990710 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Tre coefficients of friction in rolling
за авторством: A. K. Radchenko, та інші
Опубліковано: (2012)
за авторством: A. K. Radchenko, та інші
Опубліковано: (2012)
Determination of Particular Relative Reduction in Cold Rolling of Thin and Extra Thin Strips to Implement the Process with the Least Force
за авторством: Ya. D. Vasilev, та інші
Опубліковано: (2022)
за авторством: Ya. D. Vasilev, та інші
Опубліковано: (2022)
High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
за авторством: V. P. Bondarenko, та інші
Опубліковано: (2017)
за авторством: V. P. Bondarenko, та інші
Опубліковано: (2017)
External and internal friction effect on the limiting state parameters for a compressed rock specimen
за авторством: Ju. A. Kostandov, та інші
Опубліковано: (2011)
за авторством: Ju. A. Kostandov, та інші
Опубліковано: (2011)
Influence of the contact friction on limiting stress and view of destruction trajectory in the sample of rock at compression
за авторством: Ju. A. Kostandov, та інші
Опубліковано: (2010)
за авторством: Ju. A. Kostandov, та інші
Опубліковано: (2010)
Sontact with Friction of Sides of an Interface Crack under Compression and Shear
за авторством: V. I. Ostryk
Опубліковано: (2023)
за авторством: V. I. Ostryk
Опубліковано: (2023)
Test-industrial method verification of outrunning degassing of roof rock at the mine "Stepnaya"
за авторством: K. A. Bezruchko, та інші
Опубліковано: (2015)
за авторством: K. A. Bezruchko, та інші
Опубліковано: (2015)
Kinetics of wear of steels with diffusion coatings under rolling friction
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
Equipment on base of lathe tools for mill roll hard-facing
за авторством: V. I. Titarenko, та інші
Опубліковано: (2013)
за авторством: V. I. Titarenko, та інші
Опубліковано: (2013)
Modernization of roll crusher to enhance the efficiency of hard mining rocks destruction
за авторством: A. A. Titov
Опубліковано: (2018)
за авторством: A. A. Titov
Опубліковано: (2018)
The limiting state parameters of rock specimen at uniaxial compression by rigid stamps taking into account internal and external friction
за авторством: Ja. Lokshina, та інші
Опубліковано: (2013)
за авторством: Ja. Lokshina, та інші
Опубліковано: (2013)
Peculiarities of fracture of hydrogenated high- nitrogen manganese steels under rolling friction
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2014)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2014)
Unity and the problems of particularities of the regions of Ukraine: theoretical and methodological basis
за авторством: O. Reient
Опубліковано: (2007)
за авторством: O. Reient
Опубліковано: (2007)
Essence of higher education quality concept in modern development conditions
за авторством: I. V. Stankevych
Опубліковано: (2015)
за авторством: I. V. Stankevych
Опубліковано: (2015)
Particular Qualities of Migration and Concentration of Mercury in Bottom Sediments Near Industrial Territories
за авторством: N. O. Krjuchenko, та інші
Опубліковано: (2016)
за авторством: N. O. Krjuchenko, та інші
Опубліковано: (2016)
Influence of regulated cooling on quality of a rolling roll from chilled cast iron
за авторством: V. E. Khrychikov, та інші
Опубліковано: (2017)
за авторством: V. E. Khrychikov, та інші
Опубліковано: (2017)
Influence of the special features of contact interaction of the thin strip with rolls on the parameters of the initial setting of the working stand and the least thickness of the rolled strip
за авторством: Ja. D. Vasilev, та інші
Опубліковано: (2019)
за авторством: Ja. D. Vasilev, та інші
Опубліковано: (2019)
UNIQUE CHARACTERISTICS OF THE STRATIGRAPHIC STUDIES OF THE EARLY PRECAMBRIAN. Paper 1. Particular qualities of traditional stratigraphic dismemberment
за авторством: KYRYLYUK, V.P.
Опубліковано: (2013)
за авторством: KYRYLYUK, V.P.
Опубліковано: (2013)
The Influence of Higher Silicon Content on the Hardness of Spheroidal Graphite Cast Iron
за авторством: I. Novб, та інші
Опубліковано: (2015)
за авторством: I. Novб, та інші
Опубліковано: (2015)
Amplitude-dependent internal friction in AZ31 alloy sheets submitted to accumulative roll bonding
за авторством: Z. Trojanova, та інші
Опубліковано: (2018)
за авторством: Z. Trojanova, та інші
Опубліковано: (2018)
To particular issues of the study of the evolution of democracy
за авторством: T. I. Byrkovych, та інші
Опубліковано: (2018)
за авторством: T. I. Byrkovych, та інші
Опубліковано: (2018)
Analysis of the condition and particularities of the management enterprises of viticulture and winemaking subcomplex
за авторством: O. B. Kalaman
Опубліковано: (2015)
за авторством: O. B. Kalaman
Опубліковано: (2015)
Rolls roughness change during their exploitation and its impact on polluted cold-rolled metal
за авторством: E. N. Shebanits, та інші
Опубліковано: (2012)
за авторством: E. N. Shebanits, та інші
Опубліковано: (2012)
The peculiarities of rolling on combined strip mill
за авторством: V. A. Nikolaev, та інші
Опубліковано: (2011)
за авторством: V. A. Nikolaev, та інші
Опубліковано: (2011)
Quality management of educational services in higher education
за авторством: T. H. Molodchenko, та інші
Опубліковано: (2016)
за авторством: T. H. Molodchenko, та інші
Опубліковано: (2016)
The particularities of the political regime in Ukraine
за авторством: H. M. Redkina
Опубліковано: (2012)
за авторством: H. M. Redkina
Опубліковано: (2012)
Evaluation of the quality of technological processes for surfacing of parts of railway rolling stock
за авторством: V. V. Artemchuk
Опубліковано: (2012)
за авторством: V. V. Artemchuk
Опубліковано: (2012)
Force parameters in the process of drawing in free rolls
за авторством: V. A. Nikolaev, та інші
Опубліковано: (2009)
за авторством: V. A. Nikolaev, та інші
Опубліковано: (2009)
The improved method of calculation of the ultimate strength of rocks under axial compression
за авторством: D. L. Vasilev
Опубліковано: (2013)
за авторством: D. L. Vasilev
Опубліковано: (2013)
Effect of the thermal treatment of the initial tungsten_containing raw material on the structure and properties of WC–Co type hard alloys with particularly fine_grained structures
за авторством: I. V. Andreiev
Опубліковано: (2015)
за авторством: I. V. Andreiev
Опубліковано: (2015)
Quality evaluation of specialist training in higher education institutions
за авторством: I. Potaj
Опубліковано: (2014)
за авторством: I. Potaj
Опубліковано: (2014)
Peculiarities of cold strip rolling technology and development of the method of calculation for deformation modes on two stand reversing mills
за авторством: Ja. D. Vasilev, та інші
Опубліковано: (2018)
за авторством: Ja. D. Vasilev, та інші
Опубліковано: (2018)
Nature of Particular Structure Position of the Antarctica
за авторством: Pavlenkova, N.I.
Опубліковано: (2009)
за авторством: Pavlenkova, N.I.
Опубліковано: (2009)
Particularly heavy iron-serpentine concrete
за авторством: V. I. Pavlenko, та інші
Опубліковано: (2011)
за авторством: V. I. Pavlenko, та інші
Опубліковано: (2011)
The effect of the duration of external uniaxial compression on the density of hard alloys VK20 and VN20 during their final sintering in vacuum
за авторством: V. P. Bondarenko, та інші
Опубліковано: (2019)
за авторством: V. P. Bondarenko, та інші
Опубліковано: (2019)
The influence of the rate of increase in gas pressure during vacuum-compression sintering on the structure and properties of VK6M hard alloy
за авторством: M. M. Prokopiv, та інші
Опубліковано: (2023)
за авторством: M. M. Prokopiv, та інші
Опубліковано: (2023)
On a particular case of the well-known problem of V.N. Dubinin
за авторством: A. K. Bakhtin, та інші
Опубліковано: (2015)
за авторством: A. K. Bakhtin, та інші
Опубліковано: (2015)
Productive Potential of Applications of the Conception of Intellectual Capital: Particularities, Possibilities and Limitations in the Ukrainian Conditions
за авторством: Ye. Shediakov
Опубліковано: (2012)
за авторством: Ye. Shediakov
Опубліковано: (2012)
Theoretical and experimental research of hot rolling of aluminum strips for solar collector
за авторством: Makeeva, A.S., та інші
Опубліковано: (2016)
за авторством: Makeeva, A.S., та інші
Опубліковано: (2016)
Theoretical and experimental research of hot rolling of aluminum strips for solar collector
за авторством: A. S. Makeeva, та інші
Опубліковано: (2016)
за авторством: A. S. Makeeva, та інші
Опубліковано: (2016)
Схожі ресурси
-
Tre coefficients of friction in rolling
за авторством: A. K. Radchenko, та інші
Опубліковано: (2012) -
Determination of Particular Relative Reduction in Cold Rolling of Thin and Extra Thin Strips to Implement the Process with the Least Force
за авторством: Ya. D. Vasilev, та інші
Опубліковано: (2022) -
High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
за авторством: V. P. Bondarenko, та інші
Опубліковано: (2017) -
External and internal friction effect on the limiting state parameters for a compressed rock specimen
за авторством: Ju. A. Kostandov, та інші
Опубліковано: (2011) -
Influence of the contact friction on limiting stress and view of destruction trajectory in the sample of rock at compression
за авторством: Ju. A. Kostandov, та інші
Опубліковано: (2010)