Cover Image

Physical modeling of floating of the nonmetallic inclusions in steel-teeming ladles of small capacity

Saved in:

Bibliographic Details
Date:	2018
Main Authors:	A. S. Lantukh, L. S. Molchanov, E. V. Sinegin
Format:	Article
Language:	English
Published:	2018
Series:	Metal and casting of Ukraine
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000990716
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions
by: L. S. Molchanov, et al.
Published: (2018)

Features of application of the lining of teeming ladles
by: V. G. Gerasimenko, et al.
Published: (2018)

The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining
by: P. A. Plokhikh, et al.
Published: (2018)

Effect of modification on the formation of nonmetallic inclusions in KP-T wheel steel
by: Polishko, S.
Published: (2017)

Effect of modification on the formation of nonmetallic inclusions in kp-t wheel steel
by: S. Polishko
Published: (2017)

Calculation model of formation of nonmetallic inclusions of multilayer morphology in weld metal
by: L. A. Taraborkin, et al.
Published: (2018)

Introduction of technology for application of MgO-CaO-flux as a slag modifier in steel-teeming ladles of the converter workshop at the &quot;Azovstal&quot; plc
by: A. A. Travinchev, et al.
Published: (2011)

Preparing the equipment for physical modeling of processes in the melt treatment ladle
by: V. P. Piptjuk, et al.
Published: (2014)

Evaluation of distribution of nonmetallic inclusions in cast metal of 316 type steel after circumferential electroslag surfacing with liquid metal
by: A. A. Polishko, et al.
Published: (2012)

A new type of corrosion-active nonmetallic inclusions and their influence on 38KhN3MFA steel corrosion
by: M. S. Khoma, et al.
Published: (2019)

Substantiation of similarity numbers for physical modeling of thermal processes of microcoolers and liquid steel interaction during continuous casting of wheel steel
by: A. G. Velichko, et al.
Published: (2013)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
by: O. M. Moroz, et al.
Published: (2015)

Physical-chemical peculiarities of steel melt degassing from hydrogen during ladle treatment in electrostatic field
by: N. I. Zakharov, et al.
Published: (2014)

Research physical and chemical and technical characterictics of glasses melting on the basis of sand and nonmetallic minerals
by: Yu. M. Chuvashov, et al.
Published: (2010)

Features of mass transfer in bath of dc ladle furnace unit with capacity 140 tons
by: V. P. Piptjuk, et al.
Published: (2012)

Physical model of the development convective Stream and wear Crucible in Intermediate Ladles of multilane solidification of alloys
by: A. N. Smirnov, et al.
Published: (2015)

Investigation of plasma-slag processes in special and ladle electrometallurgy of steel
by: Zhdanovsky, A.A., et al.
Published: (2008)

Glasses on the basis of sand and nonmetallic minerals
by: H. F. Horbachev, et al.
Published: (2010)

Features of steel and slag mixing in a ladle during argon stirring
by: O. M. Smirnov, et al.
Published: (2009)

Investigation of glaze formation on the working surface of steel ladle refractories lining
by: A. N. Smirnov, et al.
Published: (2015)

Structural chemical condition of the refiner slags under ladle steel treatment
by: B. F. Belov, et al.
Published: (2015)

The mathematical model of probability determination technological capacity of small rivers
by: Moroz, A.
Published: (2018)

The mathematical model of probability determination technological capacity of small rivers
by: A. V. Moroz
Published: (2017)

Experimental study of the coefficient of elasticity of the wire used for secondary steel treatment in ladles
by: V. P. Piptjuk, et al.
Published: (2013)

Essential issues of modern floating point arithmetic
by: Iushchenko, R.A.
Published: (2018)

Specificities of floating point arithmetic on modern computers
by: R. A. Jushchenko, et al.
Published: (2016)

Development of technology of ladle treatment of electric steel by using pegmatite as substitute for fluorspar
by: V. N. Kornievskij, et al.
Published: (2015)

Extending life of diamond tools for machining nonmetallic materials
by: A. I. Sagradjan, et al.
Published: (2018)

On combination of floating-zone recrystallization with other purification method
by: Kravchenko, A.I.
Published: (2007)

An Artist of the Floating World (Nobel Prize in Literature for 2017)
by: D. I. Drozdovskyi
Published: (2017)

The influence of the liquid refining slags composition on the efficiency of a ladle desulfurization of the converter steels
by: S. G. Melnik
Published: (2011)

Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
by: I. N. Karp, et al.
Published: (2012)

Cast composites with nonmetallic impurities based on waste industrial products
by: A. S. Zatulovskij, et al.
Published: (2016)

Oxygen and Zinc Rechargeable Element with Cathode on the Basis of Nonmetallic Electrocatalysts
by: A. A. Dzhambek, et al.
Published: (2010)

The inclusion of small agriproducers in the state support system
by: S. V. Kyryziuk
Published: (2017)

Biosusceptometric studies of magnetic signals of small animals – physical models
by: M. A. Primin, et al.
Published: (2019)

Gases and non-metallic inclusions in steel castings
by: V. V. Jasjukov, et al.
Published: (2017)

Thermal stability of high-deformed nonmetallic crystals under static annealing
by: G. S. Olejnik, et al.
Published: (2016)

An effective way to rock mass preparation on metallic and nonmetallic quarries of Ukraine
by: K. S. Ishchenko, et al.
Published: (2019)

Melting-pouring ladle with induction heating
by: V. O. Mushegjan
Published: (2010)