Physical modeling of floating of the nonmetallic inclusions in steel-teeming ladles of small capacity
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | A. S. Lantukh, L. S. Molchanov, E. V. Sinegin |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2018
|
| Назва видання: | Metal and casting of Ukraine |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000990716 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions
за авторством: L. S. Molchanov, та інші
Опубліковано: (2018)
за авторством: L. S. Molchanov, та інші
Опубліковано: (2018)
Features of application of the lining of teeming ladles
за авторством: V. G. Gerasimenko, та інші
Опубліковано: (2018)
за авторством: V. G. Gerasimenko, та інші
Опубліковано: (2018)
The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining
за авторством: P. A. Plokhikh, та інші
Опубліковано: (2018)
за авторством: P. A. Plokhikh, та інші
Опубліковано: (2018)
Effect of modification on the formation of nonmetallic inclusions in KP-T wheel steel
за авторством: Polishko, S.
Опубліковано: (2017)
за авторством: Polishko, S.
Опубліковано: (2017)
Effect of modification on the formation of nonmetallic inclusions in kp-t wheel steel
за авторством: S. Polishko
Опубліковано: (2017)
за авторством: S. Polishko
Опубліковано: (2017)
Calculation model of formation of nonmetallic inclusions of multilayer morphology in weld metal
за авторством: L. A. Taraborkin, та інші
Опубліковано: (2018)
за авторством: L. A. Taraborkin, та інші
Опубліковано: (2018)
Introduction of technology for application of MgO-CaO-flux as a slag modifier in steel-teeming ladles of the converter workshop at the "Azovstal" plc
за авторством: A. A. Travinchev, та інші
Опубліковано: (2011)
за авторством: A. A. Travinchev, та інші
Опубліковано: (2011)
Preparing the equipment for physical modeling of processes in the melt treatment ladle
за авторством: V. P. Piptjuk, та інші
Опубліковано: (2014)
за авторством: V. P. Piptjuk, та інші
Опубліковано: (2014)
Evaluation of distribution of nonmetallic inclusions in cast metal of 316 type steel after circumferential electroslag surfacing with liquid metal
за авторством: A. A. Polishko, та інші
Опубліковано: (2012)
за авторством: A. A. Polishko, та інші
Опубліковано: (2012)
A new type of corrosion-active nonmetallic inclusions and their influence on 38KhN3MFA steel corrosion
за авторством: M. S. Khoma, та інші
Опубліковано: (2019)
за авторством: M. S. Khoma, та інші
Опубліковано: (2019)
Substantiation of similarity numbers for physical modeling of thermal processes of microcoolers and liquid steel interaction during continuous casting of wheel steel
за авторством: A. G. Velichko, та інші
Опубліковано: (2013)
за авторством: A. G. Velichko, та інші
Опубліковано: (2013)
Influence of nonmetallics on formation of pores during hot rolling of bearing steel
за авторством: O. M. Moroz, та інші
Опубліковано: (2015)
за авторством: O. M. Moroz, та інші
Опубліковано: (2015)
Physical-chemical peculiarities of steel melt degassing from hydrogen during ladle treatment in electrostatic field
за авторством: N. I. Zakharov, та інші
Опубліковано: (2014)
за авторством: N. I. Zakharov, та інші
Опубліковано: (2014)
Research physical and chemical and technical characterictics of glasses melting on the basis of sand and nonmetallic minerals
за авторством: Yu. M. Chuvashov, та інші
Опубліковано: (2010)
за авторством: Yu. M. Chuvashov, та інші
Опубліковано: (2010)
Features of mass transfer in bath of dc ladle furnace unit with capacity 140 tons
за авторством: V. P. Piptjuk, та інші
Опубліковано: (2012)
за авторством: V. P. Piptjuk, та інші
Опубліковано: (2012)
Physical model of the development convective Stream and wear Crucible in Intermediate Ladles of multilane solidification of alloys
за авторством: A. N. Smirnov, та інші
Опубліковано: (2015)
за авторством: A. N. Smirnov, та інші
Опубліковано: (2015)
Investigation of plasma-slag processes in special and ladle electrometallurgy of steel
за авторством: Zhdanovsky, A.A., та інші
Опубліковано: (2008)
за авторством: Zhdanovsky, A.A., та інші
Опубліковано: (2008)
Glasses on the basis of sand and nonmetallic minerals
за авторством: H. F. Horbachev, та інші
Опубліковано: (2010)
за авторством: H. F. Horbachev, та інші
Опубліковано: (2010)
Features of steel and slag mixing in a ladle during argon stirring
за авторством: O. M. Smirnov, та інші
Опубліковано: (2009)
за авторством: O. M. Smirnov, та інші
Опубліковано: (2009)
Investigation of glaze formation on the working surface of steel ladle refractories lining
за авторством: A. N. Smirnov, та інші
Опубліковано: (2015)
за авторством: A. N. Smirnov, та інші
Опубліковано: (2015)
Structural chemical condition of the refiner slags under ladle steel treatment
за авторством: B. F. Belov, та інші
Опубліковано: (2015)
за авторством: B. F. Belov, та інші
Опубліковано: (2015)
The mathematical model of probability determination technological capacity of small rivers
за авторством: Moroz, A.
Опубліковано: (2018)
за авторством: Moroz, A.
Опубліковано: (2018)
The mathematical model of probability determination technological capacity of small rivers
за авторством: A. V. Moroz
Опубліковано: (2017)
за авторством: A. V. Moroz
Опубліковано: (2017)
Experimental study of the coefficient of elasticity of the wire used for secondary steel treatment in ladles
за авторством: V. P. Piptjuk, та інші
Опубліковано: (2013)
за авторством: V. P. Piptjuk, та інші
Опубліковано: (2013)
Essential issues of modern floating point arithmetic
за авторством: Iushchenko, R.A.
Опубліковано: (2018)
за авторством: Iushchenko, R.A.
Опубліковано: (2018)
Specificities of floating point arithmetic on modern computers
за авторством: R. A. Jushchenko, та інші
Опубліковано: (2016)
за авторством: R. A. Jushchenko, та інші
Опубліковано: (2016)
Development of technology of ladle treatment of electric steel by using pegmatite as substitute for fluorspar
за авторством: V. N. Kornievskij, та інші
Опубліковано: (2015)
за авторством: V. N. Kornievskij, та інші
Опубліковано: (2015)
Extending life of diamond tools for machining nonmetallic materials
за авторством: A. I. Sagradjan, та інші
Опубліковано: (2018)
за авторством: A. I. Sagradjan, та інші
Опубліковано: (2018)
On combination of floating-zone recrystallization with other purification method
за авторством: Kravchenko, A.I.
Опубліковано: (2007)
за авторством: Kravchenko, A.I.
Опубліковано: (2007)
An Artist of the Floating World (Nobel Prize in Literature for 2017)
за авторством: D. I. Drozdovskyi
Опубліковано: (2017)
за авторством: D. I. Drozdovskyi
Опубліковано: (2017)
The influence of the liquid refining slags composition on the efficiency of a ladle desulfurization of the converter steels
за авторством: S. G. Melnik
Опубліковано: (2011)
за авторством: S. G. Melnik
Опубліковано: (2011)
Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
за авторством: I. N. Karp, та інші
Опубліковано: (2012)
за авторством: I. N. Karp, та інші
Опубліковано: (2012)
Cast composites with nonmetallic impurities based on waste industrial products
за авторством: A. S. Zatulovskij, та інші
Опубліковано: (2016)
за авторством: A. S. Zatulovskij, та інші
Опубліковано: (2016)
Oxygen and Zinc Rechargeable Element with Cathode on the Basis of Nonmetallic Electrocatalysts
за авторством: A. A. Dzhambek, та інші
Опубліковано: (2010)
за авторством: A. A. Dzhambek, та інші
Опубліковано: (2010)
The inclusion of small agriproducers in the state support system
за авторством: S. V. Kyryziuk
Опубліковано: (2017)
за авторством: S. V. Kyryziuk
Опубліковано: (2017)
Biosusceptometric studies of magnetic signals of small animals – physical models
за авторством: M. A. Primin, та інші
Опубліковано: (2019)
за авторством: M. A. Primin, та інші
Опубліковано: (2019)
Gases and non-metallic inclusions in steel castings
за авторством: V. V. Jasjukov, та інші
Опубліковано: (2017)
за авторством: V. V. Jasjukov, та інші
Опубліковано: (2017)
Thermal stability of high-deformed nonmetallic crystals under static annealing
за авторством: G. S. Olejnik, та інші
Опубліковано: (2016)
за авторством: G. S. Olejnik, та інші
Опубліковано: (2016)
An effective way to rock mass preparation on metallic and nonmetallic quarries of Ukraine
за авторством: K. S. Ishchenko, та інші
Опубліковано: (2019)
за авторством: K. S. Ishchenko, та інші
Опубліковано: (2019)
Melting-pouring ladle with induction heating
за авторством: V. O. Mushegjan
Опубліковано: (2010)
за авторством: V. O. Mushegjan
Опубліковано: (2010)
Схожі ресурси
-
Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions
за авторством: L. S. Molchanov, та інші
Опубліковано: (2018) -
Features of application of the lining of teeming ladles
за авторством: V. G. Gerasimenko, та інші
Опубліковано: (2018) -
The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining
за авторством: P. A. Plokhikh, та інші
Опубліковано: (2018) -
Effect of modification on the formation of nonmetallic inclusions in KP-T wheel steel
за авторством: Polishko, S.
Опубліковано: (2017) -
Effect of modification on the formation of nonmetallic inclusions in kp-t wheel steel
за авторством: S. Polishko
Опубліковано: (2017)