Buchumschlag

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet CCM. Report 1

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	S. N. Pisarskij, A. N. Smirnov, D. A. Lavrenko, D. V. Rjabyj
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000990866
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Estimation of hydrodynamic factors for increasing the efficiency of the steel casting at the multistrand billet ccm
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

Optimization of tundish box work in tundish high productivity 7-Strands billet CCM
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Investigation of the Influence of the Inner Diameter and the Depth of Placement of the Sen in the Mold of Radial Billet CCM
von: O. P. Verzilov, et al.
Veröffentlicht: (2020)

The study of modern concepts about the nature of deposits in refractories during casting of steel. Report 2
von: S. N. Pisarskij, et al.
Veröffentlicht: (2019)

Alloying of surface layer of cast billet at casting
von: V. I. Tsotsko, et al.
Veröffentlicht: (2009)

On the operational properties of rollers CCM
von: L. A. Shapran, et al.
Veröffentlicht: (2017)

Intensification of internal and external heat sink at the manufacture of cast billets in molds with different properties. Report 2
von: V. A. Mamishev, et al.
Veröffentlicht: (2018)

Results of experimental studies of a jet-reactive turbine: Effect of pressure on rotation speed
von: Baha, Tetiana, et al.
Veröffentlicht: (2025)

The study of modern concepts about the nature of deposits in refractories during casting of steel. Report 1
von: S. M. Pisarskij, et al.
Veröffentlicht: (2019)

Investigations of physico-mechanical properties of refined copper as a material for CCM mould walls
von: O. M. Smirnov, et al.
Veröffentlicht: (2024)

Electroslag casting of billets of high-pressure stop valve bodies
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2009)

New technology of restoration and fixing of copper coolers of cooling crystallizers of CCM
von: G. M. Grigorenko, et al.
Veröffentlicht: (2017)

Method of manufacture of large-sized forge-cast billets by electroslag welding
von: A. I. Voloshin, et al.
Veröffentlicht: (2012)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Method for determining the coolant heat transfer coefficient in the mold of CCM
von: A. S. Nuradinov, et al.
Veröffentlicht: (2017)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Hollow-section machine-building billets, made by centrifugal electroslag casting manufacturing perspectives
von: S. V. Skripnik, et al.
Veröffentlicht: (2011)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

External Thermal Impact as a Factor Controlling the Formation of the Structure of Cast Billets
von: A. S. Nuradinov, et al.
Veröffentlicht: (2019)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Formation of structure of railway axes made from cast billets of various sections
von: G. V. Levchenko, et al.
Veröffentlicht: (2012)

Prospects for improving the quality of railway wheels made of a continuous casted billet
von: A. I. Babachenko, et al.
Veröffentlicht: (2013)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Quality of low-carbon rod produced from billets and bloom continuous castings
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Electroslag casting of billets of bodies of flange stop valves with melting-on of branch pipes
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2009)

Possibility of preserving shape and sizes of cylindrical tubular billets of moulds in explosion cladding
von: Ju. P. Meshcherjakov, et al.
Veröffentlicht: (2009)

Method for measuring heat and mass Transfer processes formation in the mold cast billets caster, cast with electromagnetic stirring metal in the crystallizer
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2014)

Control of press-plunger speed in die-casting machine
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2013)

The influence of heating of mist flow in a ladle lance on the impulse of gas suspension jet that flows into the melt. Report 2
von: N. V. Kosolap, et al.
Veröffentlicht: (2012)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: O. M. Khoroshylov, et al.
Veröffentlicht: (2019)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

The system analysis of solidification Cast billets with Variable Crookedness of the borders Two-phase Zone
von: V. A. Mamishev
Veröffentlicht: (2014)