Cover Image

The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining

Saved in:

Bibliographic Details
Date:	2018
Main Authors:	P. A. Plokhikh, Ju. V. Khavalits
Format:	Article
Language:	English
Published:	2018
Series:	Metal and casting of Ukraine
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000992571
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Features of application of the lining of teeming ladles
by: V. G. Gerasimenko, et al.
Published: (2018)

Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions
by: L. S. Molchanov, et al.
Published: (2018)

Physical modeling of floating of the nonmetallic inclusions in steel-teeming ladles of small capacity
by: A. S. Lantukh, et al.
Published: (2018)

Investigation of glaze formation on the working surface of steel ladle refractories lining
by: A. N. Smirnov, et al.
Published: (2015)

Impact of metallurgical factors on the resistance of working ladle lining (in English)
by: A. G. Kovalenko, et al.
Published: (2016)

Melting-pouring ladle with induction heating
by: V. A. Shapovalov, et al.
Published: (2010)

Melting-pouring ladle with induction heating
by: V. O. Mushegjan
Published: (2010)

Features of steel and slag mixing in a ladle during argon stirring
by: O. M. Smirnov, et al.
Published: (2009)

Comparison of different technologies ladle desulphurization magnesium
by: A. F. Shevchenko, et al.
Published: (2015)

Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
by: I. N. Karp, et al.
Published: (2012)

Introduction of technology for application of MgO-CaO-flux as a slag modifier in steel-teeming ladles of the converter workshop at the &quot;Azovstal&quot; plc
by: A. A. Travinchev, et al.
Published: (2011)

Structural chemical condition of the refiner slags under ladle steel treatment
by: B. F. Belov, et al.
Published: (2015)

Development of technology of ladle treatment of electric steel by using pegmatite as substitute for fluorspar
by: V. N. Kornievskij, et al.
Published: (2015)

Experimental study of the coefficient of elasticity of the wire used for secondary steel treatment in ladles
by: V. P. Piptjuk, et al.
Published: (2013)

Physical-chemical peculiarities of steel melt degassing from hydrogen during ladle treatment in electrostatic field
by: N. I. Zakharov, et al.
Published: (2014)

Conduct and research of the process of joint treatment of steel with inert gas and chemically active elements using new blowing devices and pinch rolls. Message II
by: P. A. Plokhikh, et al.
Published: (2017)

The influence of blowing on hydrodynamics of metal in the casting ladle
by: M. K. Siharov, et al.
Published: (2016)

Investigation of characteristics of the process of steel processing with an inert gas in the aggregate of complex processing of steel at continuous casting (ACPS CC). Message I
by: P. A. Plokhikh, et al.
Published: (2017)

The influence of the liquid refining slags composition on the efficiency of a ladle desulfurization of the converter steels
by: S. G. Melnik
Published: (2011)

A new approach to solving the problem of directional formation of final melts during steel debugging at a ladle-furnace unit
by: D. M. Tohobytska, et al.
Published: (2021)

Testing equipment to simulate the thermal processing of the melt in the ladle furnace
by: V. P. Piptjuk, et al.
Published: (2015)

Forecast of metal finishing duration in a ladle furnace
by: N. M. Perevorochaev
Published: (2011)

Efficiency improving for gas removal from ladle furnace
by: S. N. Timoshenko, et al.
Published: (2015)

The research of iron desulphurization with refining mixture IRS-2 during tapping into 100-tonns ladles
by: B. P. Krikunov, et al.
Published: (2011)

Preparing the equipment for physical modeling of processes in the melt treatment ladle
by: V. P. Piptjuk, et al.
Published: (2014)

The influence of electromagnetic forces on mixing bath ladle furnace ac
by: V. P. Piptjuk, et al.
Published: (2014)

Influence of some factors on melt mixing during treatment on AC ladle furnace of middle power
by: V. P. Piptjuk, et al.
Published: (2011)

Investigation of effect of calcium fluoride on power-technological characteristics of wheel steel treatment in ladle-furnace installation
by: G. A. Esaulov, et al.
Published: (2014)

Improvement of electric and technological modes of metal finishing in a ladle furnace
by: N. M. Perevorochaev, et al.
Published: (2011)

Features of Rotary Processing of Aluminum Melts in the Ladle in the Rheo-Thixocasting Processes
by: V. P. Holovachenko, et al.
Published: (2020)

Stirring of liquid metal in ladle furnace by pulsing magnetic field
by: Ju. M. Gorislavets, et al.
Published: (2016)

Intensification of processes of molten iron refining in ladle by dispersed magnesium injection
by: A. F. Shevchenko, et al.
Published: (2012)

Combining ability for the traits of stem branching and plant height in linseed lines
by: Ju. Kalinina, et al.
Published: (2011)

Numerical study of melt hydrodynamics in D.C. ladle-furnace unit
by: I. V. Krikent, et al.
Published: (2014)

Development of the process of ladle desulphurization of cast iron by injection of granular magnesium
by: A. F. Shevchenko, et al.
Published: (2013)

Numerical modeling of high-current arc discharge in DC ladle-furnace unit
by: I. V. Krikent, et al.
Published: (2013)

Physicochemical prerequisites for the development of complex relationships between the properties of metallurgical melts in order to predict the regularities of the distribution of elements during the finishing of steel on a ladle furnace
by: I. R. Snihura, et al.
Published: (2020)

Calculation and analytical evaluation and industrial verification of the indicators of ladle desulfuration of cast iron using different reagents)73-89
by: A. F. Shevchenko, et al.
Published: (2020)

The investigation of the influence of both accumulating and ladle pouring processes on the blast-furnace operation
by: V. A. Petrenko, et al.
Published: (2014)

Rating refining slag properties generated by direct doping with manganese metal in the ladle
by: R. V. Sinjakov
Published: (2014)