Buchumschlag

The study of temperature fields in the thickness of the lining and the height of the ladle during drying and heating of the steel-teeming ladles with different lining

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	P. A. Plokhikh, Ju. V. Khavalits
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000992571
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Features of application of the lining of teeming ladles
von: V. G. Gerasimenko, et al.
Veröffentlicht: (2018)

Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

Physical modeling of floating of the nonmetallic inclusions in steel-teeming ladles of small capacity
von: A. S. Lantukh, et al.
Veröffentlicht: (2018)

Investigation of glaze formation on the working surface of steel ladle refractories lining
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Impact of metallurgical factors on the resistance of working ladle lining
von: Kovalenko, А.G., et al.
Veröffentlicht: (2016)

Impact of metallurgical factors on the resistance of working ladle lining (in English)
von: A. G. Kovalenko, et al.
Veröffentlicht: (2016)

Melting-pouring ladle with induction heating
von: V. A. Shapovalov, et al.
Veröffentlicht: (2010)

Melting-pouring ladle with induction heating
von: V. O. Mushegjan
Veröffentlicht: (2010)

Features of steel and slag mixing in a ladle during argon stirring
von: O. M. Smirnov, et al.
Veröffentlicht: (2009)

Comparison of different technologies ladle desulphurization magnesium
von: A. F. Shevchenko, et al.
Veröffentlicht: (2015)

Use of Oxygen and Enriched Air in Heating Furnaces, Soaking Pits and Stands of Steel Casting Ladles Heating
von: I. N. Karp, et al.
Veröffentlicht: (2012)

Introduction of technology for application of MgO-CaO-flux as a slag modifier in steel-teeming ladles of the converter workshop at the &quot;Azovstal&quot; plc
von: A. A. Travinchev, et al.
Veröffentlicht: (2011)

Investigation of plasma-slag processes in special and ladle electrometallurgy of steel
von: Zhdanovsky, A.A., et al.
Veröffentlicht: (2008)

Structural chemical condition of the refiner slags under ladle steel treatment
von: B. F. Belov, et al.
Veröffentlicht: (2015)

Development of technology of ladle treatment of electric steel by using pegmatite as substitute for fluorspar
von: V. N. Kornievskij, et al.
Veröffentlicht: (2015)

Experimental study of the coefficient of elasticity of the wire used for secondary steel treatment in ladles
von: V. P. Piptjuk, et al.
Veröffentlicht: (2013)

Physical-chemical peculiarities of steel melt degassing from hydrogen during ladle treatment in electrostatic field
von: N. I. Zakharov, et al.
Veröffentlicht: (2014)

Conduct and research of the process of joint treatment of steel with inert gas and chemically active elements using new blowing devices and pinch rolls. Message II
von: P. A. Plokhikh, et al.
Veröffentlicht: (2017)

The influence of blowing on hydrodynamics of metal in the casting ladle
von: M. K. Siharov, et al.
Veröffentlicht: (2016)

Investigation of characteristics of the process of steel processing with an inert gas in the aggregate of complex processing of steel at continuous casting (ACPS CC). Message I
von: P. A. Plokhikh, et al.
Veröffentlicht: (2017)

A new approach to solving the problem of directional formation of final melts during steel debugging at a ladle-furnace unit
von: D. M. Tohobytska, et al.
Veröffentlicht: (2021)

The influence of the liquid refining slags composition on the efficiency of a ladle desulfurization of the converter steels
von: S. G. Melnik
Veröffentlicht: (2011)

Testing equipment to simulate the thermal processing of the melt in the ladle furnace
von: V. P. Piptjuk, et al.
Veröffentlicht: (2015)

The research of iron desulphurization with refining mixture IRS-2 during tapping into 100-tonns ladles
von: B. P. Krikunov, et al.
Veröffentlicht: (2011)

Preparing the equipment for physical modeling of processes in the melt treatment ladle
von: V. P. Piptjuk, et al.
Veröffentlicht: (2014)

Forecast of metal finishing duration in a ladle furnace
von: N. M. Perevorochaev
Veröffentlicht: (2011)

Efficiency improving for gas removal from ladle furnace
von: S. N. Timoshenko, et al.
Veröffentlicht: (2015)

Influence of some factors on melt mixing during treatment on AC ladle furnace of middle power
von: V. P. Piptjuk, et al.
Veröffentlicht: (2011)

The influence of electromagnetic forces on mixing bath ladle furnace ac
von: V. P. Piptjuk, et al.
Veröffentlicht: (2014)

Investigation of effect of calcium fluoride on power-technological characteristics of wheel steel treatment in ladle-furnace installation
von: G. A. Esaulov, et al.
Veröffentlicht: (2014)

Improvement of electric and technological modes of metal finishing in a ladle furnace
von: N. M. Perevorochaev, et al.
Veröffentlicht: (2011)

Features of Rotary Processing of Aluminum Melts in the Ladle in the Rheo-Thixocasting Processes
von: V. P. Holovachenko, et al.
Veröffentlicht: (2020)

Stirring of liquid metal in ladle furnace by pulsing magnetic field
von: Ju. M. Gorislavets, et al.
Veröffentlicht: (2016)

Intensification of processes of molten iron refining in ladle by dispersed magnesium injection
von: A. F. Shevchenko, et al.
Veröffentlicht: (2012)

Combining ability for the traits of stem branching and plant height in linseed lines
von: Ju. Kalinina, et al.
Veröffentlicht: (2011)

Numerical study of melt hydrodynamics in D.C. ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2014)

Development of the process of ladle desulphurization of cast iron by injection of granular magnesium
von: A. F. Shevchenko, et al.
Veröffentlicht: (2013)

Numerical modeling of high-current arc discharge in DC ladle-furnace unit
von: I. V. Krikent, et al.
Veröffentlicht: (2013)

Physicochemical prerequisites for the development of complex relationships between the properties of metallurgical melts in order to predict the regularities of the distribution of elements during the finishing of steel on a ladle furnace
von: I. R. Snihura, et al.
Veröffentlicht: (2020)

Calculation and analytical evaluation and industrial verification of the indicators of ladle desulfuration of cast iron using different reagents)73-89
von: A. F. Shevchenko, et al.
Veröffentlicht: (2020)