Buchumschlag

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	A. G. Chernjatevich, L. S. Molchanov, P. O. Jushkevich, V. V. Vakulchuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000993224
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
von: L. S. Molchanov, et al.
Veröffentlicht: (2018)

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Improving the efficiency of converter bath top-blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Converter bath mixing peculiarities during upper and combined blowing
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2015)

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2019)

High temperature modeling of BOF bath blowing by using three-level oxygen lance
von: A. G. Chernjatevich, et al.
Veröffentlicht: (2017)

High temperature study of features of blowing a metal bath in LD converter through the annular coaxial nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2019)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Improving the Efficiency of the low-Voltage potential application Method at top oxygen Blowing in Converter
von: Semykin, S.I., et al.
Veröffentlicht: (2020)

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

Research in a physical model with the top blowing of a gas-dynamic head and jet parameters at blowing of a liquid bath through an annular coaxial slit nozzle
von: S. I. Semykin, et al.
Veröffentlicht: (2018)

Research on the physical model of features of the behavior of a two-phase bath at top blowing through a tip with folded nozzles
von: S. I. Semykin, et al.
Veröffentlicht: (2020)

Analysis of information on decarburization process bath converter
von: K. V. Egorov, et al.
Veröffentlicht: (2014)

Behavior pattern of temperature condition of converter bath
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2011)

The energy efficiency of the cooling bath the glass melting furnace
von: Ju. A. Selikhov, et al.
Veröffentlicht: (2017)

Assessment of the postcombustion process in the cavity of the working space of the oxygen converter based on assessment of the physical parameters of flue gases and flame
von: T. S. Holub, et al.
Veröffentlicht: (2022)

Direct observation of high-temperature areas of metal melt at oxygen converter blowing with low voltage application
von: S. I. Semykin, et al.
Veröffentlicht: (2021)

Splashes of liquid phases at the top of the oxygen blowing
von: V. B. Okhotskij
Veröffentlicht: (2013)

Investigation of the effect of slag on mixing of a bucket bath at bottom blowing by a method of physical modeling
von: V. P. Piptiuk, et al.
Veröffentlicht: (2018)

Analysis of the electrical characteristics of the converter when melting steel bath
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

Industrial researches of features of influence of electric impacts on the number of metal drops in slag at the top oxygen blowing
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

The study of peculiarities of formation and removal of droplets by blowing one- and two-phase liquids on the model of the LD-Converter
von: S. I. Semykin, et al.
Veröffentlicht: (2016)

Evaluating the Effi ciency of Using Coherent-Type Nozzles for the Conditions of Additional Postcombustion of CO to CO2 in the Wor king Space of the Oxygen Converter
von: T. S. Golub, et al.
Veröffentlicht: (2024)

Directions of scientific and technological research on reducing of saturation by gases of converter steel
von: V. F. Poljakov, et al.
Veröffentlicht: (2013)

Influence of the application of pulverized coal and natural gas in blast furnace on exergy indicators of technological system &quot;blast furnace-oxygen converter&quot;
von: A. L. Chajka, et al.
Veröffentlicht: (2018)

The new technologies and lance improvement for the converter slag scull coating
von: A. G. Chernjatevich
Veröffentlicht: (2014)

Investigation on physical model of converter process of features of electric potential influence on nature of liquid spraying at top blowing out
von: S. I. Semykin, et al.
Veröffentlicht: (2015)

The Exhaust Gases of Internal-Combustion Engines Neutralization Systems Evolution
von: S. V. Bojchenko, et al.
Veröffentlicht: (2010)

Ion source of reactive gases with decreased neutral gas inleakage
von: Lymar, A.G., et al.
Veröffentlicht: (2005)

Technological analysis of the efficiency of operation of periclase-carbon refractories in low-capacity converters
von: A. H. Cherniatevych, et al.
Veröffentlicht: (2021)

Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
von: S. I. Semykin, et al.
Veröffentlicht: (2017)

Study of changes in the structural and chemical composition of periclase-carbonate refractories in the process of operation as the lining of oxygen converters
von: L. S. Molchanov, et al.
Veröffentlicht: (2022)

Dry purification system of blast furnace gases as an element of energy efficiency of cast iron production technology
von: S. V. Semirjagin, et al.
Veröffentlicht: (2019)

Rational technology of preparation of iron for smelting of low-sulphur oxygen converter steel
von: A. S. Vergun, et al.
Veröffentlicht: (2012)

High-voltage converter for electric discharge neutralization of sulfur dioxide
von: A. V. Pereverziev, et al.
Veröffentlicht: (2015)

The General Principles of Waste Processing with Recovery of their Energy Potential on the Basis of Plasma Technologies. Part III. Comparative analysis of the oxygen and air blowing influence and the role of calorific content of sewage sludge
von: V. A. Zhovtianskyi, et al.
Veröffentlicht: (2018)

Integral Estimation of Harmful Blow-Out With Consideration of Combined Action of Toxical Pollutants
von: S. D. Tsybulja, et al.
Veröffentlicht: (2014)

Energy efficiency of combined cold and heat production
von: B. I. Basok, et al.
Veröffentlicht: (2018)

The efficiency of use the inductive-capacitive converters of L-shaped structure in the combined power systems
von: V. P. Kaban
Veröffentlicht: (2016)