Buchumschlag

Scheme of stressed-deformed condition of continuous-casted slab in technological casting lines

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	V. M. Poleshchuk, V. L. Brovkin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000993232
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Influence of chemical composition and casting technological parameters on the stressedly-deformed state of bimetallic castings
von: E. G. Aftandiljants, et al.
Veröffentlicht: (2016)

Physical modeling of the process of compression of continuously cast slabs and blooms during their crystallization
von: O. M. Smirnov, et al.
Veröffentlicht: (2017)

Physical modeling of the asymmetric flow of the metal in the mold slab of continuous casting machine
von: A. P. Verzilov
Veröffentlicht: (2019)

Technological schemes for supporting reused gate roads by the cast strips
von: V. N. Tripolskij, et al.
Veröffentlicht: (2018)

Advanced technology for continuous casting of steel: opportunities and challenges
von: A. N. Smirnov
Veröffentlicht: (2014)

The reasons of deformation and fracture of the working surface of the casting wheel of continuous rotary caster
von: O. M. Smirnov, et al.
Veröffentlicht: (2016)

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process
von: D. A. Djudkin
Veröffentlicht: (2011)

Casting reinforcement by lost-foam casting technology
von: P. B. Kaliuzhnyi, et al.
Veröffentlicht: (2017)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Dynamic cooling control continuous casting in transient modes of casting in the metallurgical micromills
von: A. N. Smirnov, et al.
Veröffentlicht: (2016)

Use of external physical influences to improve the technology of continuous casting of steel
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2018)

Hydroimpulsive sealing of castings with the of mode of deformation
von: P. V. Rusakov
Veröffentlicht: (2012)

Quality assurance process for continuous casting
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Quality assurance process for continuous casting
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Quality assurance process for continuous casting
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Modeling of conditions of formation oscillation marks on the surface of continuous casting ingot
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

The influence of vibration on the formation of bloom continuous casting
von: A. S. Nuradinov, et al.
Veröffentlicht: (2013)

Application of Electromagnetic Forces in Continuous Steel Casting
von: V. I. Dubodelov, et al.
Veröffentlicht: (2019)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
von: Paustovsky, A.V., et al.
Veröffentlicht: (2019)

The role of computer modelling in optimization of technological processes of steel continuous casting. Report 1
von: V. A. Belyj, et al.
Veröffentlicht: (2011)

The role of computer modelling in optimization of technological processes of steel continuous casting. Report 2
von: V. A. Belyj, et al.
Veröffentlicht: (2011)

Influence of deformation on properties of cast porous materials
von: Ju. Karpov, et al.
Veröffentlicht: (2013)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Modeling of continuous casting by combined process of MCCB + ESR
von: L. B. Medovar, et al.
Veröffentlicht: (2017)

Trends in the world and Ukrainian markets of castings and development of casting technology in the mirror of 2016
von: V. A. Giatush, et al.
Veröffentlicht: (2018)

Numerical simulation of thermal field in the casting process in relation to cast plasma technology
von: O. V. Shmatko
Veröffentlicht: (2018)

Intense plastic deformation of high-purity cast beryllium
von: Vasilev, A.A., et al.
Veröffentlicht: (2020)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2015)

Methods of Cooling Castings in the Design of the LTO Process, Complementing the Technology of Casting and Heat Treatment
von: V. S. Doroshenko
Veröffentlicht: (2020)

Features of the Technological Process of Manufacturing Two-layer Cast Iron Castings with Differentiated Properties
von: I. V. Lukjanenko
Veröffentlicht: (2019)

Electromagnetic systems in technology for continuous casting of steel and electric discharge system for disinfection and treatment of water
von: I. V. Bozhko, et al.
Veröffentlicht: (2013)

New technologies for production of castings by in-moldinoculation
von: M. A. Fesenko
Veröffentlicht: (2014)

Peculiar features of equipment for continuous production of centrifugal electroslag castings
von: S. V. Skripnik
Veröffentlicht: (2010)

Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Modern methods of organizing directionsstreams in the tundish continuous casting machine
von: A. N. Smirnov, et al.
Veröffentlicht: (2017)