Analysis of phase-structural transformations during cooling of steels, taking into account the deformations and stresses
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | S. V. Bobyr, Ju. Borisenko, O. V. Kuksa, D. V. Loshkarev |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2018
|
| Назва видання: | Fundamental and applied problems of ferrous metallurgy |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000993238 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014)
Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
за авторством: S. V. Bobyr, та інші
Опубліковано: (2017)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2017)
Prediction of residual stresses after welding of duplex steel taking into account phase transformations
за авторством: O. S. Kostenevych, та інші
Опубліковано: (2021)
за авторством: O. S. Kostenevych, та інші
Опубліковано: (2021)
Phase-structure transformations in steel 150H7T at cooling
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014)
Analytical models of austenite transformation in steel with allowance for internal stresses
за авторством: S. V. Bobyr
Опубліковано: (2018)
за авторством: S. V. Bobyr
Опубліковано: (2018)
Structure-phase transformations in the quenched constructional steel at deformation
за авторством: Ju. F. Ivanov, та інші
Опубліковано: (2009)
за авторством: Ju. F. Ivanov, та інші
Опубліковано: (2009)
Shear transformation of austenite in steels considering stresses' effects
за авторством: S. V. Bobyr, та інші
Опубліковано: (2022)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2022)
Determination of the coefficient of heat transfer during cooling of silver thermo probes, taking into account the effects of temperature-time delay
за авторством: E. N. Zotov, та інші
Опубліковано: (2017)
за авторством: E. N. Zotov, та інші
Опубліковано: (2017)
Features of the phase-structural transformations during tempering of the low-alloyed steels for hot working dies
за авторством: S. V. Bobyr, та інші
Опубліковано: (2012)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2012)
On Applicability of the Taking into Account the Third Invariant of Stress Deviator Constitutive Equations to Description of Nonlinear Deformation of Coarse-Grained Metal
за авторством: M. E. Babeshko, та інші
Опубліковано: (2015)
за авторством: M. E. Babeshko, та інші
Опубліковано: (2015)
On Equations of Thermoviscoplasticity Taking into Account the Third Invariant of Stress Deviator
за авторством: M. E. Babeshko, та інші
Опубліковано: (2015)
за авторством: M. E. Babeshko, та інші
Опубліковано: (2015)
On the kinetics of bainite transformation of austenite in steel during heat treatment in the production flow
за авторством: M. F. Evsjukov, та інші
Опубліковано: (2014)
за авторством: M. F. Evsjukov, та інші
Опубліковано: (2014)
Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
за авторством: Kandrotaitė-Janutienė, R., та інші
Опубліковано: (2016)
за авторством: Kandrotaitė-Janutienė, R., та інші
Опубліковано: (2016)
Calculation of degassing networks taking into account the accumulation of the liquid phase
за авторством: L. A. Novikov, та інші
Опубліковано: (2019)
за авторством: L. A. Novikov, та інші
Опубліковано: (2019)
The Nonequilibrium Thermodynamic Analysis of Process of Formation of Carbides in Chromium Steel During Tempering
за авторством: S. V. Bobyr
Опубліковано: (2014)
за авторством: S. V. Bobyr
Опубліковано: (2014)
Decision-making during drilling wells taking into account uncertainty
за авторством: G. M. Efendiev, та інші
Опубліковано: (2018)
за авторством: G. M. Efendiev, та інші
Опубліковано: (2018)
The modeling and optimization of tempering 17H5MA tool hot deformation
за авторством: S. V. Bobyr, та інші
Опубліковано: (2015)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2015)
Generalized model of viscoelastic interphase layer or coating taking into account the transverse shear deformation
за авторством: I. S. Skorodynskyi, та інші
Опубліковано: (2013)
за авторством: I. S. Skorodynskyi, та інші
Опубліковано: (2013)
Kinetics of Phase Transformations During Cooling-Warming of Saccharomyces cerevisiae Cells in Alginate-Containing Cryoprotective Media
за авторством: V. L. Ponomareva, та інші
Опубліковано: (2018)
за авторством: V. L. Ponomareva, та інші
Опубліковано: (2018)
Low carbon steel for hot metal deformation tools (review)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2019)
Autowave solutions of a nonlocal model for geophysical media taking into account the hysteretic character of their deformation
за авторством: V. Danylenko, та інші
Опубліковано: (2010)
за авторством: V. Danylenko, та інші
Опубліковано: (2010)
Autowave solutions of a nonlocal model for geophysical media taking into account the hysteretic character of their deformation
за авторством: Danylenko, V., та інші
Опубліковано: (2010)
за авторством: Danylenko, V., та інші
Опубліковано: (2010)
Evaluation of brittle fracture resistance of WWER-1000 reactor enclosure during long-term service, taking into account the residual technological stresses
за авторством: O. V. Makhnenko, та інші
Опубліковано: (2022)
за авторством: O. V. Makhnenko, та інші
Опубліковано: (2022)
Dependence of the kinetics of eutectic and eutectoid phase transformations on the cooling rate
за авторством: O. G. Sidorenko, та інші
Опубліковано: (2013)
за авторством: O. G. Sidorenko, та інші
Опубліковано: (2013)
Nitride hardening influence on the phase transformation and the formation of high-carbon steel structure upon cooling after austenitizing
за авторством: Ya. Shypytsyn, та інші
Опубліковано: (2014)
за авторством: Ya. Shypytsyn, та інші
Опубліковано: (2014)
Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
за авторством: S. V. Bobyr, та інші
Опубліковано: (2020)
за авторством: S. V. Bobyr, та інші
Опубліковано: (2020)
On problems of sound waves radiation at dynamic deformation process of plates taking into account external and internal damping
за авторством: V. N. Pajmushin
Опубліковано: (2013)
за авторством: V. N. Pajmushin
Опубліковано: (2013)
Influence of aerogel deformation on spin diffusion in liquid 3He: how to take correlations into account?
за авторством: L. A. Melnikovskij
Опубліковано: (2018)
за авторством: L. A. Melnikovskij
Опубліковано: (2018)
Mathematical modeling of convection drying process of wood taking into account the boundary of phase transitions
за авторством: Y. I. Sokolovskyy, та інші
Опубліковано: (2021)
за авторством: Y. I. Sokolovskyy, та інші
Опубліковано: (2021)
Evaluation of life of structures of rocket-space equipment taking into account the effect of stress concentrators in form of holes
за авторством: V. S. Gudramovich, та інші
Опубліковано: (2016)
за авторством: V. S. Gudramovich, та інші
Опубліковано: (2016)
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
за авторством: Janutienë, R.K., та інші
Опубліковано: (2015)
за авторством: Janutienë, R.K., та інші
Опубліковано: (2015)
The stamping steel for hot deformation with controlled austenit transformation
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2014)
за авторством: K. O. Hohaiev, та інші
Опубліковано: (2014)
Financial risk management with taking account of information
за авторством: Kuznietsova, N. V.
Опубліковано: (2018)
за авторством: Kuznietsova, N. V.
Опубліковано: (2018)
Financial risk management with taking account of information
за авторством: N. V. Kuznietsova
Опубліковано: (2018)
за авторством: N. V. Kuznietsova
Опубліковано: (2018)
About the austenite transformation kinetics in steels under non-equilibrium conditions
за авторством: M. F. Evsjukov, та інші
Опубліковано: (2013)
за авторством: M. F. Evsjukov, та інші
Опубліковано: (2013)
Mathematical modeling and polarimetry of the thermal stress state in semitransparent solid taking into account the influence of thermal radiation
за авторством: O. R. Hachkevych, та інші
Опубліковано: (2020)
за авторством: O. R. Hachkevych, та інші
Опубліковано: (2020)
Phase transformations of austenitic stainless modified steels
за авторством: Ye. H. Aftandiliants
Опубліковано: (2019)
за авторством: Ye. H. Aftandiliants
Опубліковано: (2019)
PROTECTION OF HOUSEHOLD APPLIANCES INDUCTION MOTORS AGAINST OVERCURRENT TAKING INTO ACCOUNT NONLINEAR DISTORTION OF PHASE CURRENT
за авторством: Sereda, O. G., та інші
Опубліковано: (2015)
за авторством: Sereda, O. G., та інші
Опубліковано: (2015)
Definition of the competitiveness taking into account the specification of port activity
за авторством: S. V. Ilchenko, та інші
Опубліковано: (2017)
за авторством: S. V. Ilchenko, та інші
Опубліковано: (2017)
Phase changes of energy metabolism during adaptation to immobilization stress
за авторством: V. I. Portnichenko, та інші
Опубліковано: (2014)
за авторством: V. I. Portnichenko, та інші
Опубліковано: (2014)
Схожі ресурси
-
Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014) -
Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
за авторством: S. V. Bobyr, та інші
Опубліковано: (2017) -
Prediction of residual stresses after welding of duplex steel taking into account phase transformations
за авторством: O. S. Kostenevych, та інші
Опубліковано: (2021) -
Phase-structure transformations in steel 150H7T at cooling
за авторством: S. V. Bobyr, та інші
Опубліковано: (2014) -
Analytical models of austenite transformation in steel with allowance for internal stresses
за авторством: S. V. Bobyr
Опубліковано: (2018)