Refined model of thermo-elastic-plastic bending of layered plates of regular structure. II. Modeling problems
Збережено в:
| Дата: | 2018 |
|---|---|
| Автор: | A. P. Jankovskij |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2018
|
| Назва видання: | Mathematical methods and physicomechanical fields |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000998338 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Refined model of thermo-elastic-plastic bending of layered plates of regular structure. I. Problem statement
за авторством: A. P. Jankovskij
Опубліковано: (2018)
за авторством: A. P. Jankovskij
Опубліковано: (2018)
Refined modeling of the dynamic behavior of flexible reinforced plates of nonlinear elastic materials on the basis of an explicit numerical "cross" scheme
за авторством: A. P. Jankovskij
Опубліковано: (2017)
за авторством: A. P. Jankovskij
Опубліковано: (2017)
On developing refined equations of vibrations of elastic plates
за авторством: I. T. Selezov
Опубліковано: (2013)
за авторством: I. T. Selezov
Опубліковано: (2013)
Dynamic bending of plastic polymetallic plates with piecewise-smooth elliptical contours
за авторством: Ju. V. Nemirovskij
Опубліковано: (2019)
за авторством: Ju. V. Nemirovskij
Опубліковано: (2019)
Visco-plastic dynamics of metal-composite shells of layered-fibrous structure under loadings of explosive type II. Discussion of results of calculations
за авторством: A. P. Jankovskij
Опубліковано: (2012)
за авторством: A. P. Jankovskij
Опубліковано: (2012)
Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
за авторством: M. Kurek, та інші
Опубліковано: (2011)
за авторством: M. Kurek, та інші
Опубліковано: (2011)
Elastic-Plastic Problem for a Stringer Plate with a Circular Hole
за авторством: Мир-Салим-заде, М. В.
Опубліковано: (2021)
за авторством: Мир-Салим-заде, М. В.
Опубліковано: (2021)
Elastic-Plastic Problem for a Stringer Plate with a Circular Hole
за авторством: Мир-Салим-заде, М. В.
Опубліковано: (2021)
за авторством: Мир-Салим-заде, М. В.
Опубліковано: (2021)
Elastic-Plastic Problem for a Stringer Plate with a Circular Hole
за авторством: Mir-Salim-zade M. V.
Опубліковано: (2021)
за авторством: Mir-Salim-zade M. V.
Опубліковано: (2021)
Mathematical modeling and determination of the thermo-elastic state of the three-layer hollow sphere at completed heat exchanges
за авторством: V. O. Horoshko, та інші
Опубліковано: (2016)
за авторством: V. O. Horoshko, та інші
Опубліковано: (2016)
Mathematical Modeling of Bending of Isotropic and Anisotropic Plates with Elliptical and Linear Inclusions
за авторством: Кошкін, А. О., та інші
Опубліковано: (2026)
за авторством: Кошкін, А. О., та інші
Опубліковано: (2026)
Mathematical Modeling of Bending of Isotropic and Anisotropic Plates with Elliptical and Linear Inclusions
за авторством: Кошкін, А. О., та інші
Опубліковано: (2026)
за авторством: Кошкін, А. О., та інші
Опубліковано: (2026)
Bending the Plate on Elastic Foundation with Initial Stresses under Action of Moving Load
за авторством: Ju. Babich, та інші
Опубліковано: (2017)
за авторством: Ju. Babich, та інші
Опубліковано: (2017)
Critical analysis of the two-dimensional heat balance equations of composite plates, obtained on the basis of the variational principles of the theory of thermal conductivity. II. Model problem
за авторством: A. P. Jankovskij
Опубліковано: (2019)
за авторством: A. P. Jankovskij
Опубліковано: (2019)
Method of Solving the Problem of Thermo-irradiation Plasticity for the Layered Axisymmetric Bodies Made of Isotropic and Orthotropic Materials
за авторством: M. O. Babeshko, та інші
Опубліковано: (2021)
за авторством: M. O. Babeshko, та інші
Опубліковано: (2021)
Solving the Problem of Elastic Bending of Layered Console by the Normal Linearly Distributed Load on Longitudinal Faces
за авторством: A. V. Gorik, та інші
Опубліковано: (2020)
за авторством: A. V. Gorik, та інші
Опубліковано: (2020)
Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
за авторством: Деревянко, І. І., та інші
Опубліковано: (2025)
за авторством: Деревянко, І. І., та інші
Опубліковано: (2025)
Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
за авторством: Деревянко, І. І., та інші
Опубліковано: (2025)
за авторством: Деревянко, І. І., та інші
Опубліковано: (2025)
Visco-plastic dynamics of metal-composite shells of layered-fibrous structure under loadings of explosive type I. Formulation of the problem and method of solution
за авторством: A. P. Jankovskij
Опубліковано: (2012)
за авторством: A. P. Jankovskij
Опубліковано: (2012)
To the problem of cylindrical bending of transtropic layer with cavity
за авторством: G. V. Erzhakov, та інші
Опубліковано: (2013)
за авторством: G. V. Erzhakov, та інші
Опубліковано: (2013)
Bending of axisymmeric loaded thick plates
за авторством: V. P. Revenko
Опубліковано: (2019)
за авторством: V. P. Revenko
Опубліковано: (2019)
Bending of partially supported circular plate
за авторством: V. I. Ostryk, та інші
Опубліковано: (2014)
за авторством: V. I. Ostryk, та інші
Опубліковано: (2014)
Modeling of the stress and phase state of the titanium nickelide plate under thermo-mechanical loading
за авторством: Ye. Onyshko, та інші
Опубліковано: (2019)
за авторством: Ye. Onyshko, та інші
Опубліковано: (2019)
Thermo-elastic interaction of a two-component circular inclusionand a crack in a plate
за авторством: V. M. Zeleniak
Опубліковано: (2012)
за авторством: V. M. Zeleniak
Опубліковано: (2012)
Physico-analytical model for gas heating in well-stirred thermo-chemical reactor II
за авторством: B. M. Shyrokov, та інші
Опубліковано: (2006)
за авторством: B. M. Shyrokov, та інші
Опубліковано: (2006)
Numerical Modeling an Elastic Bending of a Drill String in an Ultra-Deep Curvilinear Bore-Drill
за авторством: V. I. Guljaev, та інші
Опубліковано: (2014)
за авторством: V. I. Guljaev, та інші
Опубліковано: (2014)
The model of thermo-elastic solid solution which incorporate the irreversibility and inertia of local mass displacement
за авторством: O. Hrytsyna
Опубліковано: (2016)
за авторством: O. Hrytsyna
Опубліковано: (2016)
Problem on axisymmetric torsion of a multilayer plate with elastic bonds between layers
за авторством: N. M. Antonenko
Опубліковано: (2016)
за авторством: N. M. Antonenko
Опубліковано: (2016)
Modeling of thermoelastoplastic deformation of reinforced plates. II. Statement of the problem and method for solution
за авторством: A. P. Yankovskii
Опубліковано: (2021)
за авторством: A. P. Yankovskii
Опубліковано: (2021)
Longitudinal-flexural vibrations of a three-layered rod. A refined model
за авторством: S. S. Kurennov
Опубліковано: (2014)
за авторством: S. S. Kurennov
Опубліковано: (2014)
Modeling of heat transfer in composite bodies reinforced with tubes with swirlers through which the twisted liquid heat-transfer agent moves in turbulent regime. II. Model problem
за авторством: A. P. Jankovskij
Опубліковано: (2020)
за авторством: A. P. Jankovskij
Опубліковано: (2020)
Influence of stress state volume on limit equilibrium of elasto-plastic plate with regular system of internal cracks
за авторством: M. M. Nykolyshyn, та інші
Опубліковано: (2020)
за авторством: M. M. Nykolyshyn, та інші
Опубліковано: (2020)
Computer Modeling of Elastic-Plastic Deformation in the Problems of Contact Interaction of Canonical Dies with a Half-Plane
за авторством: Сачук, Юрій Володимирович, та інші
Опубліковано: (2018)
за авторством: Сачук, Юрій Володимирович, та інші
Опубліковано: (2018)
Computer Modeling of Elastic-Plastic Deformation in the Problems of Contact Interaction of Canonical Dies with a Half-Plane
за авторством: Yu. V. Sachuk, та інші
Опубліковано: (2018)
за авторством: Yu. V. Sachuk, та інші
Опубліковано: (2018)
Solving the Problems on Stress-Strain State of Plates of Complex Shape in the Refined Statement
за авторством: Ja. Grigorenko, та інші
Опубліковано: (2017)
за авторством: Ja. Grigorenko, та інші
Опубліковано: (2017)
The compatible action of bending with the tension of an isotropic plate containing a crack without contact of their tips and with taking into account plastic zones and material strengthening
за авторством: V. K. Opanasovych, та інші
Опубліковано: (2018)
за авторством: V. K. Opanasovych, та інші
Опубліковано: (2018)
Behavior of Functionally Graded Porous Plate in Bending with Smoothed Element
за авторством: Ton-That, L. H.
Опубліковано: (2025)
за авторством: Ton-That, L. H.
Опубліковано: (2025)
Bending Vibrations of the Bimorph Pirzoceramic Plates of Non-Canonical Shape
за авторством: Shakeri Mobarake, та інші
Опубліковано: (2019)
за авторством: Shakeri Mobarake, та інші
Опубліковано: (2019)
Behavior of Functionally Graded Porous Plate in Bending with Smoothed Element
за авторством: Ton-That, L. H.
Опубліковано: (2025)
за авторством: Ton-That, L. H.
Опубліковано: (2025)
Three-dimensional integral mathematical models of the dynamics of thick elastic plates
за авторством: V. A. Stojan
Опубліковано: (2018)
за авторством: V. A. Stojan
Опубліковано: (2018)
Схожі ресурси
-
Refined model of thermo-elastic-plastic bending of layered plates of regular structure. I. Problem statement
за авторством: A. P. Jankovskij
Опубліковано: (2018) -
Refined modeling of the dynamic behavior of flexible reinforced plates of nonlinear elastic materials on the basis of an explicit numerical "cross" scheme
за авторством: A. P. Jankovskij
Опубліковано: (2017) -
On developing refined equations of vibrations of elastic plates
за авторством: I. T. Selezov
Опубліковано: (2013) -
Dynamic bending of plastic polymetallic plates with piecewise-smooth elliptical contours
за авторством: Ju. V. Nemirovskij
Опубліковано: (2019) -
Visco-plastic dynamics of metal-composite shells of layered-fibrous structure under loadings of explosive type II. Discussion of results of calculations
за авторством: A. P. Jankovskij
Опубліковано: (2012)