Buchumschlag

The compatible action of bending with the tension of an isotropic plate containing a crack without contact of their tips and with taking into account plastic zones and material strengthening

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	V. K. Opanasovych, M. M. Nykolyshyn, M. S. Slobodian, S. O. Alfavitska, O. K. Bilash
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2018
Schriftenreihe:	Mathematical methods and physicomechanical fields
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001018215
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Combined bending and tension of the plate with a rectilinear through-crack in the presence of plastic zones in its tips with regard for the contact of its edges and linear strengthening of the material
von: S. O. Alfavitska, et al.
Veröffentlicht: (2017)

Biaxial bending isotropic plate with a through-thickness rectilinear crack with accounting the width of a contact zone of its faces and in the presence of plastic zones near its tips
von: V. K. Opanasovych, et al.
Veröffentlicht: (2015)

Bending isotropic plate with two equal coaxial through-thickness cracks with accounting the width of a contact zone of its faces and in the presence of plastic zones near its tips
von: V. K. Opanasovych, et al.
Veröffentlicht: (2016)

Biaxial tension of a piece-wise homogeneous plate with two cracks at the materials interface with account of plastic zones at their tips
von: M. M. Nykolyshyn, et al.
Veröffentlicht: (2014)

On one approach related to the study of the stress-strain state of piecewise homogeneous isotropic plate with a crack under bending considering the width of the contact area of its faces
von: V. K. Opanasovych, et al.
Veröffentlicht: (2015)

On the influence of strain hardening on the length of a plastic zone near a crack tip in a transversely isotropic material
von: V. N. Bastun
Veröffentlicht: (2015)

Plastic zones development at fractures threshold at tip of square notch
von: V. Kryven, et al.
Veröffentlicht: (2015)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: S. M. Sklepus
Veröffentlicht: (2023)

Progress of Plastic Zone Near a Tip of Crack with Contacting Faces
von: A. O. Kaminsky, et al.
Veröffentlicht: (2024)

Mathematical Modeling of Bending of Isotropic and Anisotropic Plates with Elliptical and Linear Inclusions
von: Кошкін, А. О., et al.
Veröffentlicht: (2026)

Mathematical Modeling of Bending of Isotropic and Anisotropic Plates with Elliptical and Linear Inclusions
von: Кошкін, А. О., et al.
Veröffentlicht: (2026)

Study of the size of plastic zones at the crack tips in orthotropic shell with accounting material hardening
von: K. M. Dovbnia, et al.
Veröffentlicht: (2012)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: Склепус, C. М.
Veröffentlicht: (2025)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: Склепус, C. М.
Veröffentlicht: (2025)

Creep Failure Time of Thin-Walled Pipes under Combined Internal Pressure, Bending, and Tension
von: El Megharbel, A.
Veröffentlicht: (2010)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: Kurek, M., et al.
Veröffentlicht: (2011)

Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
von: M. Kurek, et al.
Veröffentlicht: (2011)

Modeling of Crack Resistance of Ion-Strengthened Silicate Glass under Bending Deformations
von: P. P. Hontarovskyi, et al.
Veröffentlicht: (2022)

Tension and Shear of the Transversely Isotropic Piezoceramic Plate with Circular Hole under the Mixed Boundary Conditions on Plane Sides
von: Ju. Khoma, et al.
Veröffentlicht: (2017)

Dynamic bending of plastic polymetallic plates with piecewise-smooth elliptical contours
von: Ju. V. Nemirovskij
Veröffentlicht: (2019)

Deformation of an isotropic plate with a periodic system of curvilinear holes and plasticity bands
von: V. S. Kravets, et al.
Veröffentlicht: (2020)

Plane Problem on Stress Distribution at Neighborhood of the Crack under Tension of Linearly Strengthening Material
von: L. P. Khoroshun, et al.
Veröffentlicht: (2014)

Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2021)

Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2021)

Numerical Investigations of the Crack Resistance of Ion-Strengthened Sheet Glass Under Bending Strains
von: P. P. Hontarovskyi, et al.
Veröffentlicht: (2021)

Matching of compatible work of short high-voltage pulses of tension generator and water treatment chamber by dint of pulse barrier discharge
von: V. O. Bereka, et al.
Veröffentlicht: (2021)

The Two-Phase Hele-Shaw Problem with a Nonregular Initial Interface and Without Surface Tension
von: Bazaliy, B.V., et al.
Veröffentlicht: (2014)

Orthotropic elastico-plastic closed cylindrical shell with two trasnsverse surface cracks
von: T. M. Nykolyshyn
Veröffentlicht: (2012)

Influence of stress state volume on limit equilibrium of elasto-plastic plate with regular system of internal cracks
von: M. M. Nykolyshyn, et al.
Veröffentlicht: (2020)

Investigation of bending vibrations in Voigt – Kelvin bars taking into account the nonlinear resistance forces
von: Ya. Pukach
Veröffentlicht: (2014)

Evolution of torsion and bending moments in a frame support profile due to its plastic deformation
von: V. V. Nazymko, et al.
Veröffentlicht: (2018)

The influence of linear elastic medium on limit equilibrium of elastico-plastic cylindrical shell with a crack
von: T. M. Nykolyshyn
Veröffentlicht: (2018)

Energy dissipation during the tension of the St3 steel produced by severe plastic deformation by the rolling with shear
von: E. G. Pashinskaja, et al.
Veröffentlicht: (2016)

To the Theory of Growth of Mode I Fatigue Cracks in Thin Isotropic Plates of Finite Sizes under Unilateral Tension-Compression
von: V. P. Golub, et al.
Veröffentlicht: (2018)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: H. V. Filatov
Veröffentlicht: (2020)

Stress-Strain State in Bending of Cirsular Plate with System of Cracks with Allowance for Strip Contact of their Edges
von: M. S. Slobodian, et al.
Veröffentlicht: (2024)

Method of Solving the Problem of Thermo-irradiation Plasticity for the Layered Axisymmetric Bodies Made of Isotropic and Orthotropic Materials
von: M. O. Babeshko, et al.
Veröffentlicht: (2021)

On Solution of the Third Homogeneous Boundary Problem of Deformation of a Transversally Isotropic Plate with Curvilinear Hole under Omni-Directional Tension
von: Ju. Khoma, et al.
Veröffentlicht: (2016)