Cover Image

Preparation of Magnesium Alloy ML5 From Scrap Using Melt Treatment with a Plasma Jet

Saved in:

Bibliographic Details
Date:	2018
Main Authors:	A. V. Narivskij, Ju. V. Moiseev, V. A. Tunik, V. A. Tverdokhvalov, I. G. Razdobarin
Format:	Article
Language:	English
Published:	2018
Series:	Casting processes
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001046408
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

The technology of treatment the cast iron by vapours of magnesium reduced from its oxides
by: A. V. Narivskij, et al.
Published: (2017)

Hardening of magnesium alloy ML4 in alloying with gallium
by: M. A. Khokhlov, et al.
Published: (2017)

Repair welding of intermediate cases of aircraft engines of heat-resistant magnesium ML10 alloy applying electrodynamic treatment
by: L. M. Lobanov, et al.
Published: (2012)

Significant technology of desulfurization and degassing pig iron dispersed by treating it with magnesium injected to the melt in the gas jet
by: A. S. Vergun, et al.
Published: (2015)

Influence of alloying on heat resistance of Ml-5 alloy
by: V. A. Shalomieiev
Published: (2010)

Ukrainian Metal Scrap Association is 20 years. Challenges of the Ukrainian scrap metal market
by: V. V. Bublej
Published: (2019)

Behavior of magnesium in electroslag melting of wastes of aluminium magnesium-containing alloys
by: A. V. Gnatushenko
Published: (2013)

Formation of Ultradispersed State of Surface Layers of the Steel Alloyed with Metal Ions in the Mode of Melting by Plasma Jet
by: S. N. Bratushka, et al.
Published: (2013)

Influence of the Processes of Gas-Flux Treatment of the Melt on the Structure and Properties of the Aluminum Alloys
by: A. V. Narivskij
Published: (2019)

Preparing the equipment for physical modeling of processes in the melt treatment ladle
by: V. P. Piptjuk, et al.
Published: (2014)

Peculiarities of properties of the pulse plasma jet
by: Podzirey, Yu.S., et al.
Published: (2016)

Electroslag melting in an open mould of ingots from sheet scrap wastes of titanium VT1-0
by: D. I. Bilonyk, et al.
Published: (2022)

Problems of regulation of the ferrous scrap market in Ukraine
by: V. L. Mazur, et al.
Published: (2014)

Problems of regulation of the ferrous scrap market in Ukraine
by: V. L. Mazur, et al.
Published: (2014)

Electro-hydro-pulsed treatment for surface strengthening of 110G13ML steel frogs
by: N. A. Onatskaja, et al.
Published: (2009)

Global Trends in the Market for Recycling Waste and Scrap of Aluminum Alloys
by: V. A. Hnatush
Published: (2020)

Recovery of case aviation casting of ML 10 alloy
by: V. A. Shalomieiev
Published: (2013)

Dynamics of dust particles in a plasma jet
by: Kravchenko, O.Yu., et al.
Published: (2017)

Numerical мodeling of magnetized plasma compressed by the laser beams and plasma jets
by: Kuzenov, V.V., et al.
Published: (2013)

Influence of the gas-flux treatment of the melt on fluidity of the aluminum alloys
by: V. L. Najdek, et al.
Published: (2015)

The structure and properties of the castings from the bronze was treating by plasma
by: A. V. Narivskij, et al.
Published: (2017)

The norming sets of L(ml1n)
by: S. G. Kim
Published: (2024)

Features of process of epoxidation of natural rubber scrap in water-xylene
by: S. Zybailo, et al.
Published: (2020)

Fabrication of Aluminum Matrix Functional Composite from Scrap Copper and Aluminum Materials
by: A. S. Zatulovskij, et al.
Published: (2016)

Effect of the electro–hydro-pulse melt treatment on crystallization process and properties of Mg – Al – Ca – Mn – Ti magnesium alloy
by: I. M. Maksymchuk, et al.
Published: (2012)

Plasma bromination as pre-treatment of carbon fiber for acid-base catalyst preparation
by: L. M. Grishchenko, et al.
Published: (2015)

Influence of the vacuum-plasma treatment of fusion on structure and properties of the deformed aluminium alloys
by: V. L. Najdek, et al.
Published: (2009)

Coagulation and dynamics nanoparticles in low pressure plasma jets
by: Kravchenko, O.Yu., et al.
Published: (2019)

Influence of alloying by silver on the properties of Ml-10 magnesian alloy
by: Yu. O. Zeleniuk, et al.
Published: (2014)

Application of aeration-oxidative jet-looped setup for biological wastewater treatment
by: O. M. Obodovych, et al.
Published: (2018)

Simulation of the plasma jet with a dispersed phase in an axisymmetric chamber
by: Kravchenko, O.Yu., et al.
Published: (2012)

Diagnostics of hydrogen-oxygen plasma jet for application in gas thermal spraying
by: Yu. S. Popil, et al.
Published: (2020)

Emission properties of an atmospheric pressure argon plasma jet excited by barrier discharge
by: O. M. Korbut, et al.
Published: (2015)

Emission properties of an atmospheric pressure argon plasma jet excited by barrier discharge
by: O. M. Korbut, et al.
Published: (2015)

Repair of surface defects of casting of alloy Ml-10 using scandiumcontaining material
by: V. A. Shalomeev, et al.
Published: (2009)

Effect of composition of plasma-forming air-gas mixture on parameters of plasmatron jet
by: V. N. Pashchenko
Published: (2009)

The regularities of iron compounds transformation by Citrobacter freundii ML-31. 1/1
by: V. M. Govorukha, et al.
Published: (2016)

Tinless bronze bulky scrap processing experience under conditions of non-special nonferrous castings workshop
by: A. S. Mamedov, et al.
Published: (2009)

Mathematical modeling of jet effects
by: S. A. Dovgij, et al.
Published: (2017)

Cast grinding bodies
by: Ju. V. Moiseev, et al.
Published: (2017)