Cover Image

Method for assessing the performance of PDC for a drilling explorationtools

Saved in:

Bibliographic Details
Date:	2018
Main Authors:	V. Z. Turkevych, A. P. Zakora, Yu. O. Melnyichuk, M. V. Suprun, L. P. Stasiuk, D. A. Stratiichuk, Ye. O. Zakora
Format:	Article
Language:	English
Published:	2018
Series:	Tooling materials science
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001084490
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Analysis of materials and modern technologies for PDC drill bit manufacturing
by: Ya. Ropyak, et al.
Published: (2020)

Influence of structure of hybrid super hard material on the performance of drilling tool
by: R. K. Bogdanov, et al.
Published: (2016)

Comparative estimation of the performance of drilling bits with diamond-containing matrix and inserts from diamond-containing composites
by: O. P. Vynohradova, et al.
Published: (2022)

Assessment of wear resistance of a core drilling bit with hybridite reinforcing inserts
by: M. V. Suprun, et al.
Published: (2015)

Drilling efficiency of exploratory wells different types of tools
by: R. K. Bogdanov, et al.
Published: (2016)

Evaluation of efficiency of destruction of solid rocks by drilling crowns, equipped with synthetic diamonds and insertions DPCM+
by: A. P. Zakora, et al.
Published: (2018)

РОЗРОБКА І ВПРОВАДЖЕННЯ СУЦІЛЬНОФРЕЗЕРОВАНИХ ДОЛІТ PDC
by: Коростишевський, Дмитро, et al.
Published: (2024)

Model of deep refining wells of pdc wells with bit
by: B. V. Fedorov, et al.
Published: (2017)

Influence of the uniformity of synthetic diamond grits on the drilling tool performance
by: N. V. Novikov, et al.
Published: (2012)

Investigation of the formation during sintering diamond-carbide plates with activation additions
by: V. Z. Turkevych, et al.
Published: (2017)

Production of coarse-grained high-strength microgrits to be used in drilling tools
by: O. A. Zanevskij, et al.
Published: (2015)

Побудова регресійної моделі відпрацювання доліт типу PDC на родовищах
by: Пригоровська, Т.О.
Published: (2010)

ISM high-performance tools for drilling of oil and gas wells. Review
by: N. A. Bondarenko
Published: (2018)

БУРОВІ ДОЛОТА, АРМОВАНІ PDC РІЗЦЯМИ, ЩО ОБЕРТАЮТЬСЯ В ПРОЦЕСІ БУРІННЯ
by: Хоменко, Володимир, et al.
Published: (2023)

Досвід використання доліт PDC на родовищах Бориславського нафтогазового промислового району
by: Мрозек, Є.Р., et al.
Published: (2015)

Investigation of the structure formation during sintering pcd in hpht condition
by: V. Z. Turkevych, et al.
Published: (2019)

A Symmetric Model of Viscous Relaxing Fluid. An Evolution Problem
by: D. Zakora
Published: (2012)

A Symmetric Model of Viscous Relaxing Fluid. An Evolution Problem
by: Zakora, D.
Published: (2012)

On Properties of Root Elements in the Problem on Small Motions of Viscous Relaxing Fluid
by: D. Zakora
Published: (2017)

On the Spectrum of Rotating Viscous Relaxing Fluid
by: D. Zakora
Published: (2016)

On Properties of Root Elements in the Problem on Small Motions of Viscous Relaxing Fluid
by: Zakora, D.
Published: (2017)

Numerical Modeling an Elastic Bending of a Drill String in an Ultra-Deep Curvilinear Bore-Drill
by: V. I. Guljaev, et al.
Published: (2014)

Methodical Approaches to Assessing the Performance of the Integrated System of Pharmaceutical Enterprise Management
by: K. S. Svitlychna, et al.
Published: (2019)

Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
by: O. P. Vynohradova, et al.
Published: (2016)

Ground frequency spectrum device for treatment of drilling fluid in drilling wells
by: O. M. Davydenko, et al.
Published: (2016)

Assessment of performance of vessels with ovality
by: V. M. Dolinskij, et al.
Published: (2013)

Resource-saving issues when recovering diamond particles from rock sludge, which was formed during the operation of the diamond drilling and stone-working tool
by: N. A. Olejnik, et al.
Published: (2019)

Thermodynamic calculation of the phase diagram of the Si–C system up to 8 GPa
by: V. Z. Turkevych, et al.
Published: (2016)

Obtaining superhard diamond composites and studying their heat resistance by means of the DTA-TG analysis
by: D. A. Stratiichuk, et al.
Published: (2019)

Decision-Making in Choosing Drill Bits and Drilling Operational Parameters Based on Initial Data
by: G. M. Efendiev, et al.
Published: (2016)

Research of technological parameters of blasthole drilling with cutter drilling bits which have pins of different regidity
by: V. G. Synkov, et al.
Published: (2016)

Stresses in Spherical Shell Loaded through Rigid Inclusions
by: V. P. Shevchenko, et al.
Published: (2015)

Research of questions of mechanics of shot well-drilling
by: A. N. Davidenko, et al.
Published: (2017)

Axial force when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
by: L. M. Devin, et al.
Published: (2020)

Experiment on Quartz Drilling
by: R. Halkin
Published: (2020)

Drilling of the sidelong shaft of the well 308-dolyna using double-inhibited low-clay emulsion drilling fluid
by: Ya. S. Kotskulych, et al.
Published: (2016)

Influence of the thickness of the wall of the drilling pipe on the length of the semi-final in the comprised combined drilling column
by: A. A. Kozhevnikov, et al.
Published: (2017)

A device is for the directed boring drilling
by: O. M. Davydenko, et al.
Published: (2017)

Assessing the Electricity Market Performance in Ukraine
by: T. I. Salashenko
Published: (2022)

Assessment of performance of automatic systems on the basis of stability analysis
by: V. A. Fedorchuk, et al.
Published: (2014)