Results of investigations of physico-mechanical properties of tamponovic thermoplastic composite material based on polyethylene terephthalate
Gespeichert in:
| Datum: | 2018 |
|---|---|
| Hauptverfasser: | A. K. Sudakov, Ju. L. Kuzin, D. A. Sudakova |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2018
|
| Schriftenreihe: | Tooling materials science |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0001084501 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Absorbing horizons insulation of drilling wells thermoplastic materials
von: A. K. Sudakov, et al.
Veröffentlicht: (2019)
von: A. K. Sudakov, et al.
Veröffentlicht: (2019)
The kinetics of deposition of polyaniline on polyethylene and polyethylene terephthalate substrates-matrices
von: Yu. Stetsiv, et al.
Veröffentlicht: (2016)
von: Yu. Stetsiv, et al.
Veröffentlicht: (2016)
Sensor properties of polyaniline films on polyethylene terephthalate substrate
von: Yu. Stetsiv
Veröffentlicht: (2017)
von: Yu. Stetsiv
Veröffentlicht: (2017)
Theoretical bases of technology of isolation of absorptive horizons by thermoplastic materials
von: A. K. Sudakov, et al.
Veröffentlicht: (2017)
von: A. K. Sudakov, et al.
Veröffentlicht: (2017)
Structure and morphology of polypyrrole films chemically deposited on the polyethylene terephthalate substrates
von: M. M. Yatsyshyn, et al.
Veröffentlicht: (2016)
von: M. M. Yatsyshyn, et al.
Veröffentlicht: (2016)
Thin polyaniline films on a polyethylene terephthalate substrate as Cr(VI) adsorbents
von: Yu. Stetsiv, et al.
Veröffentlicht: (2021)
von: Yu. Stetsiv, et al.
Veröffentlicht: (2021)
Surface polymerization of monomers on the polyethylene terephthalate membrane in low temperature plasma for water treatment
von: Trachevskiy, V., et al.
Veröffentlicht: (2017)
von: Trachevskiy, V., et al.
Veröffentlicht: (2017)
Study of biodegradation of polymer thermoplastic starch-derivative composite materials
von: O. P. Nedilko, et al.
Veröffentlicht: (2017)
von: O. P. Nedilko, et al.
Veröffentlicht: (2017)
Tribological properties of epoxi composite materials filled with dispersed particles and thermoplastic materials
von: A. V. Buketov, et al.
Veröffentlicht: (2016)
von: A. V. Buketov, et al.
Veröffentlicht: (2016)
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)
von: Han, Z.Y., et al.
Veröffentlicht: (2014)
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Z. Y. Han, et al.
Veröffentlicht: (2014)
von: Z. Y. Han, et al.
Veröffentlicht: (2014)
Mechanochemical modification of the structure and physico-mechanical proptrties of polyethylene, carbide-containing Si, Ti and Mo
von: V. P. Gordienko, et al.
Veröffentlicht: (2016)
von: V. P. Gordienko, et al.
Veröffentlicht: (2016)
Investigations of physico-mechanical properties of refined copper as a material for CCM mould walls
von: O. M. Smirnov, et al.
Veröffentlicht: (2024)
von: O. M. Smirnov, et al.
Veröffentlicht: (2024)
Thermoplastic composites with modified silicate fillers: morphology and properties
von: Ye. Levytskyi, et al.
Veröffentlicht: (2018)
von: Ye. Levytskyi, et al.
Veröffentlicht: (2018)
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019)
von: Guo, A.F., et al.
Veröffentlicht: (2019)
Physico-chemical and mechanical properties of organic-inorganic composites
von: H. I. Khovanets, et al.
Veröffentlicht: (2015)
von: H. I. Khovanets, et al.
Veröffentlicht: (2015)
Algorithmization of the determination of along-the-meridian variable physico-mechanical material properties of multilayer composite shells of revolution
von: A. P. Dzjuba, et al.
Veröffentlicht: (2019)
von: A. P. Dzjuba, et al.
Veröffentlicht: (2019)
Welding of thermoplastic polymer composites in the aviation industry (a review)
von: M. V. Yurzhenko, et al.
Veröffentlicht: (2020)
von: M. V. Yurzhenko, et al.
Veröffentlicht: (2020)
Thermoplastic analysis in cryobiotechnology optimization
von: E. V. Strjuchkova, et al.
Veröffentlicht: (2008)
von: E. V. Strjuchkova, et al.
Veröffentlicht: (2008)
The effect of aluminosilicate filler on the physico-mechanical characteristics of polypropylene-polycaproamide composites
von: O. V. Suberliak, et al.
Veröffentlicht: (2014)
von: O. V. Suberliak, et al.
Veröffentlicht: (2014)
Thermoplastic starch as a component of film-forming compositions with degradable properties
von: T. V. Dmytriieva, et al.
Veröffentlicht: (2021)
von: T. V. Dmytriieva, et al.
Veröffentlicht: (2021)
Structural features and mechanical properties of composites based on chitosan and polyethylene glycol esters
von: S. M. Kobylinskyi, et al.
Veröffentlicht: (2014)
von: S. M. Kobylinskyi, et al.
Veröffentlicht: (2014)
Properties of polyethylene–carbon nanotubes composites
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2017)
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2017)
Structure and physico-mechanical properties of CVD diamonds of various crystalline perfections in the hybridite material
von: A. N. Sokolov, et al.
Veröffentlicht: (2013)
von: A. N. Sokolov, et al.
Veröffentlicht: (2013)
Effect of thermoplastic treatment on the structure, the texture and the mechanical properties of stainless maraging steel
von: B. M. Efros, et al.
Veröffentlicht: (2016)
von: B. M. Efros, et al.
Veröffentlicht: (2016)
Physico-chemical transformations in mechanical and electroactivated coals
von: A. N. Molchanov, et al.
Veröffentlicht: (2018)
von: A. N. Molchanov, et al.
Veröffentlicht: (2018)
Physico-mechanical properties of composite diamond-containing materials based on Fe‒Cu–Ni–Sn‒VN matrices, sintered by vacuum hot pressing
von: B. T. Ratov, et al.
Veröffentlicht: (2022)
von: B. T. Ratov, et al.
Veröffentlicht: (2022)
Investigation of the main properties of reverse osmosis membranes and their influence on changes in the physico-chemical composition of aqueous solutions
von: M. V. Kravchenko, et al.
Veröffentlicht: (2022)
von: M. V. Kravchenko, et al.
Veröffentlicht: (2022)
Investigation of the main properties of reverse osmosis membranes and their influence on changes in the physico-chemical composition of aqueous solutions
von: Kravchenko, Мarina V., et al.
Veröffentlicht: (2022)
von: Kravchenko, Мarina V., et al.
Veröffentlicht: (2022)
Physico-mechanical and physicochemical interaction at sintering of cBN-TiB₂ composites under ultrahigh pressure
von: Garbuz, T.O., et al.
Veröffentlicht: (2007)
von: Garbuz, T.O., et al.
Veröffentlicht: (2007)
Physico-mechanical properties of WC‒Co‒CrB2-matrices of composite diamond-containing materials sintered by vacuum hot pressing for drilling tools
von: B. T. Ratov, et al.
Veröffentlicht: (2022)
von: B. T. Ratov, et al.
Veröffentlicht: (2022)
Physico-chemical principles of synthesis and properties of epoxy-polyaniline composites
von: V. Zakordonskyi, et al.
Veröffentlicht: (2014)
von: V. Zakordonskyi, et al.
Veröffentlicht: (2014)
Influence of phase composition on physico-mechanical properties of composites based on silicon, boron and titanium nitrides, sintered under high pressure
von: V. S. Urbanovich, et al.
Veröffentlicht: (2017)
von: V. S. Urbanovich, et al.
Veröffentlicht: (2017)
Development of the film-forming materials based on chitosan and carboxyl-containing polyethylene glycols: Structure and Mechanical Properties
von: S. M. Kobylinskyi, et al.
Veröffentlicht: (2014)
von: S. M. Kobylinskyi, et al.
Veröffentlicht: (2014)
Electrical conductivity of the "polyethylene — vanadium dioxide" composite
von: E. V. Antonova, et al.
Veröffentlicht: (2013)
von: E. V. Antonova, et al.
Veröffentlicht: (2013)
Properties of binary mixtures based on thermoplastic polyurethanes and polyolefins
von: V. M. Anisimov
Veröffentlicht: (2012)
von: V. M. Anisimov
Veröffentlicht: (2012)
Properties of thermoplastic polyurethanes based on mixtures of complex polyesters
von: V. M. Anisimov
Veröffentlicht: (2012)
von: V. M. Anisimov
Veröffentlicht: (2012)
An axisymmetric thermoplasticity problem for a piecewise homogeneous ring
von: V. M. Maksymovych, et al.
Veröffentlicht: (2014)
von: V. M. Maksymovych, et al.
Veröffentlicht: (2014)
The effect of thermal ageing on electrical and mechanical properties of thermoplastic nanocomposite insulation of power high-voltage cables
von: El Sherkawy, E., et al.
Veröffentlicht: (2024)
von: El Sherkawy, E., et al.
Veröffentlicht: (2024)
Polyethylene and its place in nowadays polymeric material science
von: S. Ivanchev
Veröffentlicht: (2013)
von: S. Ivanchev
Veröffentlicht: (2013)
Ähnliche Einträge
-
Absorbing horizons insulation of drilling wells thermoplastic materials
von: A. K. Sudakov, et al.
Veröffentlicht: (2019) -
The kinetics of deposition of polyaniline on polyethylene and polyethylene terephthalate substrates-matrices
von: Yu. Stetsiv, et al.
Veröffentlicht: (2016) -
Sensor properties of polyaniline films on polyethylene terephthalate substrate
von: Yu. Stetsiv
Veröffentlicht: (2017) -
Theoretical bases of technology of isolation of absorptive horizons by thermoplastic materials
von: A. K. Sudakov, et al.
Veröffentlicht: (2017) -
Structure and morphology of polypyrrole films chemically deposited on the polyethylene terephthalate substrates
von: M. M. Yatsyshyn, et al.
Veröffentlicht: (2016)