Simulation of the stress-strain state of the container at compression on anvils of a cubic press
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | O. O. Leshchuk, O. V. Bovsunivskyi, S. B. Polotniak, V. V. Lysakivskyi, S. A. Ivakhnenko |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2018
|
| Назва видання: | Tooling materials science |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001084523 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Numerical simulation of the stress-strain and limit states of the pyrophyllite container and punches of a six-punch high pressure apparatus
за авторством: O. V. Bovsunivskyi, та інші
Опубліковано: (2020)
за авторством: O. V. Bovsunivskyi, та інші
Опубліковано: (2020)
Numerical simulation of the mechanical state of the two-stage multi-anvil high pressure apparatus
за авторством: S. B. Polotniak, та інші
Опубліковано: (2016)
за авторством: S. B. Polotniak, та інші
Опубліковано: (2016)
The influence of geometrical parameters of punches of cubic high-pressure apparatus on their stress-strain and limiting state at high pressure creation
за авторством: S. B. Polotniak, та інші
Опубліковано: (2017)
за авторством: S. B. Polotniak, та інші
Опубліковано: (2017)
Prognostication of the recess anvil HPA container's material efficiency by the results of the Bridgman anvils tests
за авторством: S. A. Vinogradov
Опубліковано: (2017)
за авторством: S. A. Vinogradov
Опубліковано: (2017)
Investigation of the stress-strain state of a finite cylinder under compression forces effect
за авторством: V. P. Revenko
Опубліковано: (2010)
за авторством: V. P. Revenko
Опубліковано: (2010)
Elastoplastic Axisymmetric Stress-Strain State of Thin Shells from Materials with Different Strength to Tension and Compression
за авторством: M. O. Babeshko, та інші
Опубліковано: (2021)
за авторством: M. O. Babeshko, та інші
Опубліковано: (2021)
Numerical simulation of stress and strain state in coal under true triaxial stress field
за авторством: I. G. Sakhno, та інші
Опубліковано: (2014)
за авторством: I. G. Sakhno, та інші
Опубліковано: (2014)
Influence of intensity of heat removal from block-matrices of recessed anvil-type high-pressure apparatus on distribution of temperature in reaction cell
за авторством: V. V. Nagornyj, та інші
Опубліковано: (2017)
за авторством: V. V. Nagornyj, та інші
Опубліковано: (2017)
Analysis of the Dynamic Behavior and Stress-Strain State of NPP Containment under Non-Stationary Impacts
за авторством: P. Z. Lugovoj, та інші
Опубліковано: (2016)
за авторством: P. Z. Lugovoj, та інші
Опубліковано: (2016)
Study of stress-strain state of expulsi
за авторством: D. S. Mudrov, та інші
Опубліковано: (2016)
за авторством: D. S. Mudrov, та інші
Опубліковано: (2016)
Computations of Stressed-Strained State of Compressor Rim Blade Using OPENFOAM Nu-merical Simulation Platform
за авторством: S. V. Melashich
Опубліковано: (2017)
за авторством: S. V. Melashich
Опубліковано: (2017)
Numerical modelling of stress-strain state of elements
за авторством: I. K. Senchenkov, та інші
Опубліковано: (2021)
за авторством: I. K. Senchenkov, та інші
Опубліковано: (2021)
Mathematical models and algorithms for optimal packing of balls and cubes into spherical and cubic containers
за авторством: P. I. Stetsiuk, та інші
Опубліковано: (2022)
за авторством: P. I. Stetsiuk, та інші
Опубліковано: (2022)
Effect of Platen Restraint on Stress–Strain Behavior of Concrete under Uniaxial Compression: A Comparative Study
за авторством: Kumar, S., та інші
Опубліковано: (2016)
за авторством: Kumar, S., та інші
Опубліковано: (2016)
Stress-strain state of welded joints from aluminium alloys under the conditions simulating open space
за авторством: E. A. Asnis, та інші
Опубліковано: (2018)
за авторством: E. A. Asnis, та інші
Опубліковано: (2018)
Stress-strain state of the plates of zero flexure
за авторством: A. M. Smoliar, та інші
Опубліковано: (2015)
за авторством: A. M. Smoliar, та інші
Опубліковано: (2015)
Defect-and-impurity state of type Ib diamond single crystals of the cubic habit
за авторством: E. M. Suprun, та інші
Опубліковано: (2016)
за авторством: E. M. Suprun, та інші
Опубліковано: (2016)
Modeling of elastomeric lining stress-strain state
за авторством: V. Z. Jurechko, та інші
Опубліковано: (2015)
за авторством: V. Z. Jurechko, та інші
Опубліковано: (2015)
New automated shear cell with diamond anvils for in situ studies of materials using X-ray diffraction
за авторством: N. V. Novikov, та інші
Опубліковано: (2015)
за авторством: N. V. Novikov, та інші
Опубліковано: (2015)
On the Stress-Strain State of Plates of Complex Shape
за авторством: Ja. Grigorenko, та інші
Опубліковано: (2018)
за авторством: Ja. Grigorenko, та інші
Опубліковано: (2018)
Investigation and modeling of the stress-strain state of tent and arched crowns
за авторством: O. V. Kalinichenko, та інші
Опубліковано: (2018)
за авторством: O. V. Kalinichenko, та інші
Опубліковано: (2018)
On calculation of massive rubber-metallic elements under compressive strains
за авторством: V. I. Dyrda, та інші
Опубліковано: (2015)
за авторством: V. I. Dyrda, та інші
Опубліковано: (2015)
Computer simulation of stress strain state of functionally graded sandwich plates and shallow shells of the complex shape resting on elastic foundation
за авторством: T. V. Shmatko
Опубліковано: (2021)
за авторством: T. V. Shmatko
Опубліковано: (2021)
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
за авторством: Guo, A.F., та інші
Опубліковано: (2019)
за авторством: Guo, A.F., та інші
Опубліковано: (2019)
Methods of evaluation of the stress-strain state in reinforced iron-concrete structures
за авторством: O. V. Panchenko
Опубліковано: (2013)
за авторством: O. V. Panchenko
Опубліковано: (2013)
Thermal stress state of a bimaterial with interface crack filled with compressive fluid
за авторством: Kh. I. Serednytska
Опубліковано: (2020)
за авторством: Kh. I. Serednytska
Опубліковано: (2020)
Stress-strain state of cylindrical sub-assemblies in diffusion welding
за авторством: V. I. Makhnenko, та інші
Опубліковано: (2009)
за авторством: V. I. Makhnenko, та інші
Опубліковано: (2009)
Stress-strain state monitoring of the load-bearing elements of ship structures
за авторством: O. P. Zavalniuk, та інші
Опубліковано: (2013)
за авторством: O. P. Zavalniuk, та інші
Опубліковано: (2013)
The influence of the stress-strain state on distribution of hydrogen concentration in the prefracture region.
за авторством: V. V. Panasiuk, та інші
Опубліковано: (2014)
за авторством: V. V. Panasiuk, та інші
Опубліковано: (2014)
Theory of integral acoustoelasticity for 3-D stress-strained state
за авторством: Chekurin, V.
Опубліковано: (2010)
за авторством: Chekurin, V.
Опубліковано: (2010)
Theory of integral acoustoelasticity for 3-D stress-strained state
за авторством: V. Chekurin
Опубліковано: (2010)
за авторством: V. Chekurin
Опубліковано: (2010)
On Determination of Stress-Strain State of Plates of Complex Shape
за авторством: Ja. Grigorenko, та інші
Опубліковано: (2018)
за авторством: Ja. Grigorenko, та інші
Опубліковано: (2018)
On stress-strain state of elliptical cylinders in spatial formulation
за авторством: Ja. Grigorenko, та інші
Опубліковано: (2019)
за авторством: Ja. Grigorenko, та інші
Опубліковано: (2019)
Simulation of the stress-strain state of the rocks at the "Gigant-Glubokaya" underground mine when applying a consolidating backfill technology
за авторством: M. I. Stupnik, та інші
Опубліковано: (2017)
за авторством: M. I. Stupnik, та інші
Опубліковано: (2017)
Stress-strain State of Thick-Wall Anisotropic Cylindrical Shell
за авторством: M. P. Semeniuk, та інші
Опубліковано: (2023)
за авторством: M. P. Semeniuk, та інші
Опубліковано: (2023)
The research of the stress-strain state of the losk joint of the operating blades
за авторством: V. L. Shvetsov, та інші
Опубліковано: (2012)
за авторством: V. L. Shvetsov, та інші
Опубліковано: (2012)
Evolution of the stress-strain state and the dynamics of the Skip cover of the Ukrainian Carpathians
за авторством: Gintov, O.B., та інші
Опубліковано: (2011)
за авторством: Gintov, O.B., та інші
Опубліковано: (2011)
Stress-strain state research of fastener in hydraulic turbine flanged connections
за авторством: V. I. Gnitko, та інші
Опубліковано: (2017)
за авторством: V. I. Gnitko, та інші
Опубліковано: (2017)
Stressed state of a multilayer inhomogeneous cylinder subjected to uniform compression on its lateral surface
за авторством: L. P. Tokova, та інші
Опубліковано: (2013)
за авторством: L. P. Tokova, та інші
Опубліковано: (2013)
Diagnostics of the stress-strain state of multi-layer ring welded joints of pipelines
за авторством: Yu. V. Banakhevych, та інші
Опубліковано: (2014)
за авторством: Yu. V. Banakhevych, та інші
Опубліковано: (2014)
Схожі ресурси
-
Numerical simulation of the stress-strain and limit states of the pyrophyllite container and punches of a six-punch high pressure apparatus
за авторством: O. V. Bovsunivskyi, та інші
Опубліковано: (2020) -
Numerical simulation of the mechanical state of the two-stage multi-anvil high pressure apparatus
за авторством: S. B. Polotniak, та інші
Опубліковано: (2016) -
The influence of geometrical parameters of punches of cubic high-pressure apparatus on their stress-strain and limiting state at high pressure creation
за авторством: S. B. Polotniak, та інші
Опубліковано: (2017) -
Prognostication of the recess anvil HPA container's material efficiency by the results of the Bridgman anvils tests
за авторством: S. A. Vinogradov
Опубліковано: (2017) -
Investigation of the stress-strain state of a finite cylinder under compression forces effect
за авторством: V. P. Revenko
Опубліковано: (2010)