The influence of making on structure, physical-mechanical and operational properties of alloy VK10 OM
Збережено в:
Дата: | 2018 |
---|---|
Автори: | M. M. Prokopiv, O. V. Kharchenko |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
2018
|
Назва видання: | Tooling materials science |
Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0001084530 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
-
Influence of annealing in vacuum on structure, physical and mechanical properties and performance sustainability instrument sintered in hydrogen from the alloy VK10 om for friction welding with stirring
за авторством: O. V. Kharchenko
Опубліковано: (2016) -
The influence of VC and TaS alloying microadditives on the structure and physico-mechanical properties of VK10 hard alloys
за авторством: V. P. Botvynko
Опубліковано: (2018) -
Structure and properties of solid BK6-OM alloy after electrosintering
за авторством: Prokopiv, N.M., та інші
Опубліковано: (2018) -
Features of influence of sintering conditions of fine-grained WC–10Co cemented carbide on its structure, physical-mechanical and operational characteristics
за авторством: M. M. Prokopiv, та інші
Опубліковано: (2019) -
The influence of the rate of increase in gas pressure during vacuum-compression sintering on the structure and properties of VK6M hard alloy
за авторством: M. M. Prokopiv, та інші
Опубліковано: (2023)