Investigation of cutting temperature in turning cutters with diamond-carbide plates

Investigation of cutting temperature in turning cutters with diamond-carbide plates

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	L. N. Devin, N. E. Stakhniv, A. S. Antonjuk, S. V. Rychev
Format:	Artikel
Sprache:	English
Veröffentlicht:	2018
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001084538
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
von: N. E. Stakhniv, et al.
Veröffentlicht: (2019)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
von: L. N. Devin, et al.
Veröffentlicht: (2018)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
von: L. N. Devin, et al.
Veröffentlicht: (2019)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
von: N. E. Stakhniv, et al.
Veröffentlicht: (2018)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Investigation of acoustic emission signal on the stage of penetretion and exit when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2022)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

Axial force when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2020)

The correlation model of acoustic emission in fine diamond turning
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

Investigation of the structure of diamond-carbide plates obtained by different methods
von: L. P. Stasiuk, et al.
Veröffentlicht: (2016)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Investigation of the formation during sintering diamond-carbide plates with activation additions
von: V. Z. Turkevych, et al.
Veröffentlicht: (2017)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
von: N. E. Stakhniv
Veröffentlicht: (2017)

Study of performance of cbn incisors "borsinit" when turning titanium alloy VT1-0
von: L. N. Devin, et al.
Veröffentlicht: (2016)

Effect of damping properties of cutters on the probability of failure of the CBN plates
von: L. M. Devin, et al.
Veröffentlicht: (2016)

Comparison of results of the determination of the stresses on the cutting edges from diamond monocrystals by analytic 2-D and 3-D by the finite element method
von: L. N. Devin, et al.
Veröffentlicht: (2017)

An experimental study of the influence of tool material and fine turning conditions on the level of acoustic emission signals
von: L. N. Devin, et al.
Veröffentlicht: (2016)

Development of technology of brazing of diamond-hardalloy cutters
von: B. F. Stefaniv
Veröffentlicht: (2013)

Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
von: H. P. An, et al.
Veröffentlicht: (2014)

Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
von: An, H.P., et al.
Veröffentlicht: (2014)

An increase of operating characteristics of cBN cutters by improving their damping properties
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Modification of high speed steels by nanostructured materials for manufacture cutting inserts cutters of mining machines
von: L. V. Sudnik, et al.
Veröffentlicht: (2017)

Drilling carbide rock cutting tool of a new type
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
von: V. F. Khorunov, et al.
Veröffentlicht: (2012)

Investigation on the influence of preliminary treatment and composition of composite coatings on a lifetime of hardalloyed cutting plates
von: N. N. Belash, et al.
Veröffentlicht: (2003)

Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool
von: O. P. Vynohradova, et al.
Veröffentlicht: (2024)

Peculiarities of calculating the geometric parameters of a diamond cutter for the formation of ring Fresnel lenses
von: Зенін, В. М., et al.
Veröffentlicht: (2024)

Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases
von: L. Jaworska, et al.
Veröffentlicht: (2017)

Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases
von: Jaworska, L., et al.
Veröffentlicht: (2017)

Structure and electrophysical properties of the diamond–graphen–silicon carbide composite
von: A. A. Shulzhenko, et al.
Veröffentlicht: (2018)

Formation of diamond-carbide granules to be used in rock destruction tools
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

Peculiarities of induction brazing of diamond-hard-alloy cutters with body wing of composite drilling bit
von: B. V. Stefaniv
Veröffentlicht: (2013)

Effect of structure of joint zone of diamond layer with hard-alloy substrate of brazed cutters on their service life
von: B. V. Stefaniv, et al.
Veröffentlicht: (2018)

Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
von: B. C. Liu, et al.
Veröffentlicht: (2017)

Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
von: Liu, B.C., et al.
Veröffentlicht: (2017)