Cover Image

Physical prerequisites of construction of mathematical models of electric resistance of plasma-erosive loads

Saved in:

Bibliographic Details
Date:	2017
Main Authors:	N. A. Shydlovska, S. M. Zakharchenko, O. P. Cherkaskyi
Format:	Article
Language:	English
Published:	2017
Series:	Technical Electrodynamics
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000693271
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Parametric model of resistance of plasma-erosive load, adequate in the wide range of change of applied voltage
by: N. A. Shydlovska, et al.
Published: (2017)

Comparison of the Smoothing Efficiency of Signals of Voltage on the Plasma-Erosive Load and Its Current by Multi-Iterative Filtration Methods
by: N. A. Shydlovska, et al.
Published: (2017)

Features of transients in second-order circuits with a nonlinear model of spark-erosion load under conditions of forced limitation of their duration
by: N. A. Shydlovska, et al.
Published: (2022)

Transients in the RLC-circuit with heterogeneous plasma-erosive load
by: N. A. Shidlovskaja, et al.
Published: (2014)

Model of an output circuit of the discharge pulses generator with a plasma-erosive load adequate in wide range of changes of their parameters
by: N. A. Shidlovskaja, et al.
Published: (2015)

Discrete nonlinear-probabilistic model of the equivalent electrical resistance of a layer of metal granules
by: N. A. Shydlovska, et al.
Published: (2021)

Analytical nonlinear-probabilistic model of the equivalent electrical resistance of a layer of metal granules
by: N. A. Shydlovska, et al.
Published: (2021)

Modeling of transients in a discharge-pulse system for processing granulated conductive media using a refined dependence of their resistance on time
by: N. A. Shydlovska, et al.
Published: (2019)

The analysis of electromagnetic processes in output circuit of the generator of discharge pulses with non-linear model of plasma-erosive load at change their parameters in wide ranges
by: N. A. Shidlovskaja, et al.
Published: (2016)

Erosion mechanisms and erosion products in tungsten targets exposed to plasma heat loads relevant to ELMS and mitigated disruptions in ITER
by: Safronov, V.M., et al.
Published: (2010)

CONSTRUCTION OF A MATHEMATICAL MODEL OF ELECTRICITY CONSUMPTION MODE
by: Kuznietsov, M. P.
Published: (2017)

Construction of a mathematical model of electricity consumption mode
by: M. P. Kuznietsov
Published: (2017)

Erosion features of tungsten surfaces under combined steady-state and transient plasma loads
by: Herashchenko, S.S., et al.
Published: (2016)

Producing of erosion- resistant and heat- resistant multi- layer coatings for GTE blades by the method of micro electric arc ion-plasma vacuum sputtering of materials
by: E. V. Dabizha, et al.
Published: (2013)

Plausible but unreasonable prerequisites when constructing diagnostic models
by: L. S. Fajnzilberg
Published: (2020)

Macroscopic erosion of divertor materials under plasma heat loads typical for ITER hard disruptions
by: Safronov, V., et al.
Published: (2002)

Formation electroexplosion wear and resistance to electrical erosion coatings using electron-beam treatment
by: D. A. Romanov, et al.
Published: (2014)

Characterization of macroscopic erosion of castellated and flat tungsten surfaces under ITER-like transient plasma loads
by: Myroshnyk, M.O., et al.
Published: (2019)

Improving the dynamic characteristics of electric discharge installations, which are significantly distant from the spark-erosion load
by: N. I. Suprunovska, et al.
Published: (2022)

Modeling of Capacitive Erosion of Low-Current Electrical Contacts Using Matlab
by: O. O. Sytnyk, et al.
Published: (2020)

Mathematical modeling of electrical resistance slag bath of electroslag crucible furnace
by: O. S. Ivanova, et al.
Published: (2017)

Erosion properties of tungsten and WTa5 alloy exposed to repetitive QSPA plasma loads below melting threshold
by: Makhlai, V.A., et al.
Published: (2018)

Peculiarities of the diameter distributions obtained at submilisecond duration of discharge pulses spark-erosive aluminum particles and caverns on the surface of its granules
by: N. A. Shydlovska, et al.
Published: (2021)

Recent Advances in the Development of Erosion Sources of Plasma
by: O. A. Honcharov, et al.
Published: (2019)

Physical and technical prerequisites for development of metallurgical plasmatrons
by: V. V. Stepanenko, et al.
Published: (2020)

The transport of the erosion products of electrodes in electric arcs
by: Zhovtyansky, V.A.
Published: (2003)

Comparative analysis of capacitors pulse charge algorithms at the systems of plasma-erosive treatment for heterogenic current-conductive mediums
by: S. N. Zakharchenko, et al.
Published: (2014)

Formation prerequisites of constructive opposition in the Visegrad countries
by: H. I. Zelenko
Published: (2015)

On the influence of electrode erosion on properties of nonideal plasma of underwater discharges
by: Starchyk, P.D., et al.
Published: (2012)

Physical and mechanical characteristics of impact-resistant ceramics under static and dynamic loading
by: L. M. Devin, et al.
Published: (2021)

Criteria for the necessary and sufficient number of iterations of filtering non-periodic non-stationary signals by multi-iterative methods
by: N. A. Shydlovska, et al.
Published: (2017)

Melt layer macroscopic erosion of tungsten and other metals under plasma heat loads simulating ITER off-normal events
by: Garkusha, I.E., et al.
Published: (2002)

Improving the Accuracy of the Voltage Regulation in the Capacitive Energy Storage Devices for Pulse Plasma-Erosion Treatment Systems of Heterogeneous Conductive Media
by: S. N. Zakharchenko, et al.
Published: (2016)

Mathematical Modeling of the Optimal Training Loading in the Sailing
by: Ye. A. Savchenko-Syniakova, et al.
Published: (2022)

Modeling of flexible nuclear power unit operational modes in the mathematical model of the Ukraine’s power system daily electric load profile dispatching
by: Nechaieva T.P.
Published: (2021)

Plasma guns of an erosion type with the pulse-periodic gas-metal injection
by: Vinnikov, D.V., et al.
Published: (2022)

Influence of plasma treatment on erosion haracteristics and structure of reversible hydrogen getters
by: Borisko, V.N., et al.
Published: (2000)

Physical modeling of electrical physical processes at long air gaps breakdown
by: M. M. Rezinkina, et al.
Published: (2017)

Physical modeling of electrical physical processes at long air gaps breakdown
by: Rezinkina, M.M., et al.
Published: (2017)

Solid erosion-resistant coatings of Ti-B-C system, deposited in vacuum
by: Ju. Jakovchuk, et al.
Published: (2009)