Stability Loss of Layered Composite under Compression of Reinforcing Layers by Surface Load
Gespeichert in:
| Datum: | 2017 |
|---|---|
| Hauptverfasser: | V. M. Bystrov, V. A. Dekret, V. S. Zelenskij |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2017
|
| Schriftenreihe: | International Applied Mechanics |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000708861 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Numerical Study of Stability of Layered Composite under Uni-Axial Compression of Filler Layers
von: V. A. Dekret, et al.
Veröffentlicht: (2014)
von: V. A. Dekret, et al.
Veröffentlicht: (2014)
Numerical Study of Edge Effect in Layered Composite Material under Compression of Filler Layers
von: V. M. Bystrov, et al.
Veröffentlicht: (2015)
von: V. M. Bystrov, et al.
Veröffentlicht: (2015)
Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
von: V. A. Dekret, et al.
Veröffentlicht: (2021)
von: V. A. Dekret, et al.
Veröffentlicht: (2021)
Edge Effect and Near-the-Surface Buckling in Layerd Composite Material under Imperfect Contact between Layers
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
Stability of Layered Cylindrical Anisotropic Shells under Action of Axial Compressive Loads in the Spatial Statement
von: N. P. Semenjuk, et al.
Veröffentlicht: (2019)
von: N. P. Semenjuk, et al.
Veröffentlicht: (2019)
Determination of critical parameters in the problem of stability of elements of constructions from composite laminate
von: V. S. Zelenskij, et al.
Veröffentlicht: (2018)
von: V. S. Zelenskij, et al.
Veröffentlicht: (2018)
Stress-strain State of Three-layer Cylindrical Shells with Reinforced Lightweight Filler under Nonstationary Loading
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2021)
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2021)
On the Stress-Strain State of Layered Composite Plates under Local Loadings
von: A. V. Marchuk, et al.
Veröffentlicht: (2018)
von: A. V. Marchuk, et al.
Veröffentlicht: (2018)
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
Formation of Directional Wave Fields on Surface of Deformable Layer under Impulse Loading
von: G. О. Voropaiev, et al.
Veröffentlicht: (2024)
von: G. О. Voropaiev, et al.
Veröffentlicht: (2024)
End effect and near-surface buckling in a laminate composite material compres sed by a surface load
von: V. M. Bystrov
Veröffentlicht: (2019)
von: V. M. Bystrov
Veröffentlicht: (2019)
Mathematical model for determination of effective physical and mechanical characteristics of cross-reinforced composite layer
von: M. V. Marchuk, et al.
Veröffentlicht: (2018)
von: M. V. Marchuk, et al.
Veröffentlicht: (2018)
Dynamics of Three-Layer Spherical Shells with a Discrete-Symmetric Light Rib-Reinforced Filler under Non-Stationary Loads
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2022)
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2022)
Natural frequencies of layered composite plates-strips with components compliant to transversal shear and compression
von: M. V. Marchuk, et al.
Veröffentlicht: (2013)
von: M. V. Marchuk, et al.
Veröffentlicht: (2013)
Compression of thin layer rubber-metal elements
von: V. I. Dyrda, et al.
Veröffentlicht: (2017)
von: V. I. Dyrda, et al.
Veröffentlicht: (2017)
On the localization of surface waves in the layer of an ideal compressible fluid interacting with the elastic half-space
von: A. M. Bagno
Veröffentlicht: (2018)
von: A. M. Bagno
Veröffentlicht: (2018)
Vibrations of Layered Conical Shell under Nonstationary Loading
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2022)
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2022)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: H. V. Filatov
Veröffentlicht: (2021)
von: H. V. Filatov
Veröffentlicht: (2021)
Composite casting with a controlled surface layer
von: V. V. Jasjukov, et al.
Veröffentlicht: (2016)
von: V. V. Jasjukov, et al.
Veröffentlicht: (2016)
Stability of Composite Cylindrical Shells with Geometrical and Structural Imperfections under Axial Compression
von: M. P. Semeniuk, et al.
Veröffentlicht: (2022)
von: M. P. Semeniuk, et al.
Veröffentlicht: (2022)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)
von: Филатов, Г. В.
Veröffentlicht: (2021)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)
von: Филатов, Г. В.
Veröffentlicht: (2021)
On the propagation of axisymmetric waves in laminated composite compressible materials with initial stresses at the slipping of layers
von: Yu. Hlukhov
Veröffentlicht: (2016)
von: Yu. Hlukhov
Veröffentlicht: (2016)
An effective approximate analytical solution to the stability problem of a three-layer conical shell under combined loading
von: V. Z. Grishchak, et al.
Veröffentlicht: (2018)
von: V. Z. Grishchak, et al.
Veröffentlicht: (2018)
On the frequency spectrum of normal modes in a prestressed compressible layer interacting with the layer of an ideal fluid
von: A. M. Bagno
Veröffentlicht: (2015)
von: A. M. Bagno
Veröffentlicht: (2015)
The influence of loading on the deformation of surface layer of steels with boron-chromium coating
von: L. A. Arendar, et al.
Veröffentlicht: (2011)
von: L. A. Arendar, et al.
Veröffentlicht: (2011)
Arc surfacing of layers of metal of varying composition and hardness
von: V. V. Peremitko, et al.
Veröffentlicht: (2017)
von: V. V. Peremitko, et al.
Veröffentlicht: (2017)
Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: Filatov, Heorhii V.
Veröffentlicht: (2021)
von: Filatov, Heorhii V.
Veröffentlicht: (2021)
Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: Filatov, Heorhii V.
Veröffentlicht: (2021)
von: Filatov, Heorhii V.
Veröffentlicht: (2021)
Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: H. V. Filatov
Veröffentlicht: (2021)
von: H. V. Filatov
Veröffentlicht: (2021)
Determination of the energy of dissipation in layered beams under vibration loading
von: B. M. Diveiev, et al.
Veröffentlicht: (2016)
von: B. M. Diveiev, et al.
Veröffentlicht: (2016)
Dynamical Behavior of Three-Layer Ellipsoidal Shells under Nonstationary Loads
von: V. F. Meish, et al.
Veröffentlicht: (2022)
von: V. F. Meish, et al.
Veröffentlicht: (2022)
Effect of electric-magnetic composite field on WC particulate reinforced metal matrix composites layers by laser melt injection
von: L. Van, et al.
Veröffentlicht: (2016)
von: L. Van, et al.
Veröffentlicht: (2016)
Effect of technological schemes of induction surfacing on stability of deposited layer thickness
von: Ch. V. Pulka, et al.
Veröffentlicht: (2013)
von: Ch. V. Pulka, et al.
Veröffentlicht: (2013)
Effect of a Layer of Viscous Compressible Fluid on a Surface Instability of Incompressible Elastic Half-Space under Finite Initial Deformations
von: O. M. Bahno
Veröffentlicht: (2022)
von: O. M. Bahno
Veröffentlicht: (2022)
Deformation of Three-Layer Bar with Compressible Filler in the Neutron Flux
von: E. I. Starovojtov, et al.
Veröffentlicht: (2020)
von: E. I. Starovojtov, et al.
Veröffentlicht: (2020)
Loss of cohesion between concrete and steel reinforcement under the influence of corrosion-hydrogenated environment
von: M. I. Hredil
Veröffentlicht: (2021)
von: M. I. Hredil
Veröffentlicht: (2021)
Damping characteristics of three-layer beam-damper under harmonic loading
von: Y. A. Zhuk
Veröffentlicht: (2014)
von: Y. A. Zhuk
Veröffentlicht: (2014)
Dispersion Spectrum of Wave Process in a System "Layer of Ideal Fluid – Compressible Elastic Layer”
von: A. M. Bagno
Veröffentlicht: (2015)
von: A. M. Bagno
Veröffentlicht: (2015)
Exfoliation of the element of reinforcement of a half plane under cyclic loading
von: M. M. Kundrat
Veröffentlicht: (2021)
von: M. M. Kundrat
Veröffentlicht: (2021)
Ähnliche Einträge
-
Numerical Study of Stability of Layered Composite under Uni-Axial Compression of Filler Layers
von: V. A. Dekret, et al.
Veröffentlicht: (2014) -
Numerical Study of Edge Effect in Layered Composite Material under Compression of Filler Layers
von: V. M. Bystrov, et al.
Veröffentlicht: (2015) -
Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
von: V. A. Dekret, et al.
Veröffentlicht: (2021) -
Edge Effect and Near-the-Surface Buckling in Layerd Composite Material under Imperfect Contact between Layers
von: V. M. Bystrov, et al.
Veröffentlicht: (2022) -
Stability of Layered Cylindrical Anisotropic Shells under Action of Axial Compressive Loads in the Spatial Statement
von: N. P. Semenjuk, et al.
Veröffentlicht: (2019)