Buchumschlag

The accuracy of rolling thickness adjustment in conditions of high-frequency disturbances taking into account the speed of roll setting devices

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	Yu. Potap, A. V. Ivanichyk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2022
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001393476
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of the special features of contact interaction of the thin strip with rolls on the parameters of the initial setting of the working stand and the least thickness of the rolled strip
von: Ja. D. Vasilev, et al.
Veröffentlicht: (2019)

Research of laboratory rolling stand 150 as an object of automation
von: M. D. Zinchenko, et al.
Veröffentlicht: (2022)

Improvement of crack-resistance of banded support rolls in high-speed deposition
von: V. V. Chigarev, et al.
Veröffentlicht: (2009)

Coefficient of crystallization speed twin-roll casting steel and aluminium
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2013)

Analytical study of technological and design parameters of section casting-and-rolling unit&#039;s influence on finished rolled steel accuracy
von: S. I. Badjuk
Veröffentlicht: (2013)

Automatic control of accelerated cooling of rolled metal on thick plates mills
von: N. G. Ievlev
Veröffentlicht: (2017)

Rheological properties of steel at roll casting-rolling
von: O. V. Nohovitsyn, et al.
Veröffentlicht: (2014)

Definition of speed limits continuous high-speed rolling of wire of a various diameter at use reducucing-calibration of the block
von: A. A. Gorbanev, et al.
Veröffentlicht: (2015)

Features of forming rolled formed sections in the rolls of the mill
von: M. E. Doktorov, et al.
Veröffentlicht: (2013)

Neutral corner while rolling in the non-driving rolls
von: A. I. Leshchenko, et al.
Veröffentlicht: (2012)

Improvement of crack resistance of banded support rolls at high-speed surfacing with low energy input
von: S. V. Shchetynin, et al.
Veröffentlicht: (2020)

Profiling bypass rolls for improving the flatness of the bands at the cold rolling
von: V. A. Nikolaev, et al.
Veröffentlicht: (2009)

The implementation of the thermomechanical controlled rolling technology in rolling mill 1700
von: A. G. Kurpe, et al.
Veröffentlicht: (2017)

Improvement of increasing crack resistance of banded supporting rolls at high-speed surfacing with low heat input
von: S. V. Shchetinin
Veröffentlicht: (2016)

Comparative study of two rolling bond process for super-thick Q235B
von: Guanghui Zhao, et al.
Veröffentlicht: (2016)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
von: S. V. Bobyr, et al.
Veröffentlicht: (2020)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
von: Ju. Gridin, et al.
Veröffentlicht: (2013)

Manufacture of wire rods with extended dimensions and grades in the view of rational parameters of sizing and desired rolling accuracy
von: A. A. Gorbanev, et al.
Veröffentlicht: (2017)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)

Rolls roughness change during their exploitation and its impact on polluted cold-rolled metal
von: E. N. Shebanits, et al.
Veröffentlicht: (2012)

Influence of regulated cooling on quality of a rolling roll from chilled cast iron
von: V. E. Khrychikov, et al.
Veröffentlicht: (2017)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)

Models of form change of ends of thick wide strip in plan at rolling in system of horizontal and vertical rols
von: A. V. Vasekin
Veröffentlicht: (2009)

Tre coefficients of friction in rolling
von: A. K. Radchenko, et al.
Veröffentlicht: (2012)

Antoni Rolle and Ivan Franko
von: V. Rynda
Veröffentlicht: (2017)

Automated information system of four-stand mill rolling process (AISRP) at the sold rolling shop
von: N. A. Kelij, et al.
Veröffentlicht: (2012)

Determination of the heat transfer coefficient in the metal-roll system at twin-roll casting of aluminum alloys
von: S. V. Bondarenko, et al.
Veröffentlicht: (2013)

Automated systems for protection of rolling stands equipment from overloads and rolling process information support
von: G. G. Grabovskij, et al.
Veröffentlicht: (2015)

Classification of surface technological defects of metal roll in metal-roll by means of deep neuron network
von: I. V. Konovalenko, et al.
Veröffentlicht: (2020)

Prediction of the Conditions for the Formation of a Thin Strip of High-Strength Aluminum Alloys, Depending on the Speed of Casting Rolls and Technological Parameters
von: M. I. Tarasevych, et al.
Veröffentlicht: (2020)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)

Problems of development of industrial usage of technology of double-roll casting and rolled of aluminum and iron-carbon alloys
von: I. R. Baranov
Veröffentlicht: (2018)

New concept of rolling improving for shaped sections and modernization of rail and linear rolling mills. Message 2
von: S. A. Sukhomlin
Veröffentlicht: (2016)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
von: S. V. Bobyr, et al.
Veröffentlicht: (2017)

About some rolling parameters calculation
von: V. A. Nikolaev
Veröffentlicht: (2009)

Features of vibration measurements in rolling stands
von: V. V. Verenev, et al.
Veröffentlicht: (2018)

The peculiarities of rolling on combined strip mill
von: V. A. Nikolaev, et al.
Veröffentlicht: (2011)

Informative of transient processes in rolling mills
von: V. V. Verenev
Veröffentlicht: (2014)