Cover Image

The accuracy of rolling thickness adjustment in conditions of high-frequency disturbances taking into account the speed of roll setting devices

Saved in:

Bibliographic Details
Date:	2022
Main Authors:	Yu. Potap, A. V. Ivanichyk
Format:	Article
Language:	English
Published:	2022
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001393476
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Influence of the special features of contact interaction of the thin strip with rolls on the parameters of the initial setting of the working stand and the least thickness of the rolled strip
by: Ja. D. Vasilev, et al.
Published: (2019)

Research of laboratory rolling stand 150 as an object of automation
by: M. D. Zinchenko, et al.
Published: (2022)

Improvement of crack-resistance of banded support rolls in high-speed deposition
by: V. V. Chigarev, et al.
Published: (2009)

Coefficient of crystallization speed twin-roll casting steel and aluminium
by: A. V. Nogovitsyn, et al.
Published: (2013)

Analytical study of technological and design parameters of section casting-and-rolling unit&#039;s influence on finished rolled steel accuracy
by: S. I. Badjuk
Published: (2013)

Rheological properties of steel at roll casting-rolling
by: O. V. Nohovitsyn, et al.
Published: (2014)

Automatic control of accelerated cooling of rolled metal on thick plates mills
by: N. G. Ievlev
Published: (2017)

Definition of speed limits continuous high-speed rolling of wire of a various diameter at use reducucing-calibration of the block
by: A. A. Gorbanev, et al.
Published: (2015)

Features of forming rolled formed sections in the rolls of the mill
by: M. E. Doktorov, et al.
Published: (2013)

Neutral corner while rolling in the non-driving rolls
by: A. I. Leshchenko, et al.
Published: (2012)

Improvement of crack resistance of banded support rolls at high-speed surfacing with low energy input
by: S. V. Shchetynin, et al.
Published: (2020)

Profiling bypass rolls for improving the flatness of the bands at the cold rolling
by: V. A. Nikolaev, et al.
Published: (2009)

The implementation of the thermomechanical controlled rolling technology in rolling mill 1700
by: A. G. Kurpe, et al.
Published: (2017)

Improvement of increasing crack resistance of banded supporting rolls at high-speed surfacing with low heat input
by: S. V. Shchetinin
Published: (2016)

Comparative study of two rolling bond process for super-thick Q235B
by: Guanghui Zhao, et al.
Published: (2016)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
by: L. K. Leshchynskyi, et al.
Published: (2021)

Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
by: S. V. Bobyr, et al.
Published: (2020)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
by: Ju. Gridin, et al.
Published: (2013)

Manufacture of wire rods with extended dimensions and grades in the view of rational parameters of sizing and desired rolling accuracy
by: A. A. Gorbanev, et al.
Published: (2017)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
by: S. E. Kondratiuk, et al.
Published: (2016)

Rolls roughness change during their exploitation and its impact on polluted cold-rolled metal
by: E. N. Shebanits, et al.
Published: (2012)

Influence of regulated cooling on quality of a rolling roll from chilled cast iron
by: V. E. Khrychikov, et al.
Published: (2017)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
by: Guan, B., et al.
Published: (2018)

Tre coefficients of friction in rolling
by: A. K. Radchenko, et al.
Published: (2012)

Antoni Rolle and Ivan Franko
by: V. Rynda
Published: (2017)

Models of form change of ends of thick wide strip in plan at rolling in system of horizontal and vertical rols
by: A. V. Vasekin
Published: (2009)

Automated information system of four-stand mill rolling process (AISRP) at the sold rolling shop
by: N. A. Kelij, et al.
Published: (2012)

Determination of the heat transfer coefficient in the metal-roll system at twin-roll casting of aluminum alloys
by: S. V. Bondarenko, et al.
Published: (2013)

Automated systems for protection of rolling stands equipment from overloads and rolling process information support
by: G. G. Grabovskij, et al.
Published: (2015)

Classification of surface technological defects of metal roll in metal-roll by means of deep neuron network
by: I. V. Konovalenko, et al.
Published: (2020)

Prediction of the Conditions for the Formation of a Thin Strip of High-Strength Aluminum Alloys, Depending on the Speed of Casting Rolls and Technological Parameters
by: M. I. Tarasevych, et al.
Published: (2020)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
by: V. H. Razdobrieiev, et al.
Published: (2022)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
by: Ju. Prikhodko, et al.
Published: (2013)

Problems of development of industrial usage of technology of double-roll casting and rolled of aluminum and iron-carbon alloys
by: I. R. Baranov
Published: (2018)

New concept of rolling improving for shaped sections and modernization of rail and linear rolling mills. Message 2
by: S. A. Sukhomlin
Published: (2016)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
by: S. V. Bobyr, et al.
Published: (2017)

About some rolling parameters calculation
by: V. A. Nikolaev
Published: (2009)

Features of vibration measurements in rolling stands
by: V. V. Verenev, et al.
Published: (2018)

The peculiarities of rolling on combined strip mill
by: V. A. Nikolaev, et al.
Published: (2011)

Informative of transient processes in rolling mills
by: V. V. Verenev
Published: (2014)