Buchumschlag

Producing of high-strength thermosensitive bimetal invar/copper foils by the method of electron beam deposition

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	A. I. Ustinov, S. A. Demchenkov, E. V. Fesjun
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000741392
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The influence of copper on the heat resistance of thin foils of high-entropy alloys of the Cr–Fe–Co–Ni–Cu system obtained by the electron beam deposition method
von: A. I. Ustinov, et al.
Veröffentlicht: (2022)

Phase transformations in heating multi-layer foil Al/Cu produced by the method of electron beam deposition
von: L. A. Olikhovskaja, et al.
Veröffentlicht: (2009)

Properties of steel-copper bimetal produced by brazing in autonomous vacuum
von: I. P. Serebrjanik, et al.
Veröffentlicht: (2018)

Producing of thick vacuum condensates of high-entropic alloys CrFeCoNiCu and AlCrFeCoNiCu by the method of electron beam deposition
von: A. I. Ustinov, et al.
Veröffentlicht: (2019)

The influence of basic technological parameters on the layers bonding strength of the bimetal aluminum-copper
von: V. G. Zagorjanskij
Veröffentlicht: (2014)

Influence of microstructure of multilayer Al/Ni foils on phase transformations initiated by heating
von: A. I. Ustinov, et al.
Veröffentlicht: (2022)

Producing of high-strength titanium alloy VT22 by method of electron beam melting
von: S. V. Akhonin, et al.
Veröffentlicht: (2018)

Physical and mechanical properties of transition zone of bimetal produced by autonomous vacuum brazing of copper on steel
von: M. G. Atroshenko, et al.
Veröffentlicht: (2015)

Producing of SiC-based protective coatings on zirconium fuel-element shells by the method of electron beam deposition
von: A. I. Ustinov, et al.
Veröffentlicht: (2016)

TI/ Al foils: methods of producing, properties and application in pressure welding
von: A. I. Ustinov, et al.
Veröffentlicht: (2012)

Producing of aluminium-steel bimetal with a profiled contact boundary
von: A. Z. Bogunov, et al.
Veröffentlicht: (2009)

Structure and biomedical characteristics of calcium-phosphate materials, produced by electron beam deposition
von: L. A. Krushynska, et al.
Veröffentlicht: (2023)

Structure of titanium dioxide condensates, produced by the method of electron beam deposition in vacuum
von: L. A. Krushinskaja
Veröffentlicht: (2014)

Electron beam melting of new high-strength titanium alloy T120
von: S. V. Akhonin, et al.
Veröffentlicht: (2017)

Electron beam welding of complexly-alloyed high-strength titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)

Features of the structure and physico-chemical properties of copper produced by the method of electron beam evaporation and condensation in vacuum
von: V. H. Hrechaniuk, et al.
Veröffentlicht: (2023)

Conditions of producing defect-free quasi-crystalline Al–Cu–Fe coatings using the method of electron beam deposition in vacuum
von: S. S. Polishchuk, et al.
Veröffentlicht: (2014)

Investigation of heat treatment effect on the strength of Al–Ti bimetal honeycomb core
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2021)

Effect of quasi-crystalline coatings Al–Cu–Fe (B), produced by the method of electron beam deposition, on service properties of dies and press moulds
von: V. A. Telichko, et al.
Veröffentlicht: (2014)

Producing of bimetal semi-products by laser welding with a full penetration weld
von: M. Shmidt, et al.
Veröffentlicht: (2014)

Effect of high-pressure treatment on structure and properties of invar Fe–35% Ni alloy
von: V. M. Nadutov, et al.
Veröffentlicht: (2013)

Producing of high-quality ingots-slabs of nickel by the method of electron beam melting
von: N. P. Trigub, et al.
Veröffentlicht: (2011)

Magnetic materials on base of microlayer condensates Fe/Cu produced by electron beam deposition in vacuum
von: S. E. Litvin, et al.
Veröffentlicht: (2009)

Effect of ageing of reaction multilayer Al/Ni foils on rate of SHS. reaction front spreading
von: S. A. Demchenkov, et al.
Veröffentlicht: (2017)

Peculiarities of producing Al-Ti bimetal sheet joints by the method of vacuum diffusion welding
von: Yu. V. Falchenko, et al.
Veröffentlicht: (2020)

Peculiarities of weld formation in electron-beam welding of high-strength steels of large thickness
von: Ja. Belenkij, et al.
Veröffentlicht: (2012)

Fe-Ni invar alloy: an example of fractal decomposition?
von: Abromeit, C., et al.
Veröffentlicht: (2005)

Structure and some properties of sodium chloride condensates produced by electron beam evaporation with next deposition in vacuum
von: I. S. Kovinskij, et al.
Veröffentlicht: (2011)

Structure and some properties of sodium chloride condensates produced by electron beam evaporation with next deposition in vacuum
von: Ju. A. Nikitenko
Veröffentlicht: (2011)

Features of structure and properties of bimetal joints of dissimilar metals produced by friction stir welding process
von: G. M. Grigorenko, et al.
Veröffentlicht: (2013)

Production of ingots from high-strength structural titanium-base alloys by electron beam melting
von: V. O. Berezos
Veröffentlicht: (2021)

Mechanical properties of nanostructured cermets on Al2O3 base, produced by electron beam deposition in vacuum
von: Ja. A. Stelmakh
Veröffentlicht: (2012)

Structure and strength characteristics of dispersion-hardened composite foils (films) based on iron and nickel
von: Il′insky, A.I., et al.
Veröffentlicht: (2013)

Aluminum surface coating of copper using highcurrent electron beam
von: Donets, S.E., et al.
Veröffentlicht: (2015)

Effect of iron additions on sub-and microstructure of vacuum condensates of copper
von: A. I. Ustinov, et al.
Veröffentlicht: (2010)

Deformation behavior of vacuum condensates of copper and nickel in nanostructured state
von: A. I. Ustinov, et al.
Veröffentlicht: (2016)

Peculiaries of resistance welding of copper with aluminium alloys using nanostructured foil of Al-Cu system
von: V. S. Kuchuk-Jatsenko
Veröffentlicht: (2011)

The system of constructive geometrical parameters of model of high voltage glow discharge electron guns, producing profile electron beams
von: I. V. Melnyk, et al.
Veröffentlicht: (2019)

Influence of thermodynamic and structural parameters of multilayer foils on CBC process characteristics
von: M. V. Kravchuk, et al.
Veröffentlicht: (2015)

Cavitation resistance of metal coatings deposited by a high-current relativistic electron beam
von: Ju. F. Lonin, et al.
Veröffentlicht: (2010)